Float conversions continue to be lowered early at the same time as
nir_lower_doubles, which we run early so we don't have to run it for
every shader key variant. However, all other int64 lowering is now
done late, after nir_opt_load_store_vectorize(), allowing it to
comprehend basic arithmetic on 64-bit addresses.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23064>
We'd like to postpone most int64 lowering until pretty late in the
process, because e.g. turning iadd@64 into (unpack + add-low + add-high
+ compare + b2i32 + repack) sequences makes it difficult for many
optimization passes to detect basic arithmetic patterns. In particular,
nir_opt_load_store_vectorizer becomes unable to handle basic offset math
on 64-bit addresses.
We'd like to do double precision lowering earlier in the process,
however. One snag is that nir_lower_int64's lower_2f and lower_f2 can
produce operations that may need lowering by nir_lower_doubles(), so
it's crucial to run those sets of lowering together.
To handle this, we make a new entrypoint that does nir_lower_int64
but skips everything except float conversions. Note that the newly
produced instructions will still be lowered according to the full set
of int64 lowering options; this shouldn't be a huge deal.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23064>
There was a missing vk_free() and one at the wrong place.
Fixes:
dEQP-VK.api.object_management.alloc_callback_fail.render_pass
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23070>
Some tests had `input_count == 0` so the driver would attempt to
`vk_alloc()` a size of zero and error out. Add some checks to
prevent that.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23070>
If the command buffer already had an error while recording, on
vkEndCommandBuffer() the command buffer wasn't being transitioned
to the invalid state.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23069>
Some code still used our custom `status` field within the command
buffer. This could lead to unreliable error handling since we're
using the common vk_command_buffer handling.
This commit removes the field and changes the error paths to use
the common code instead.
Signed-off-by: Karmjit Mahil <Karmjit.Mahil@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23069>
On RDNA1&2, the driver needs to support both NGG and legacy for
primitives generated query because we can't know that before starting
queries.
To get the query pool results, we check the availability bit wrote by
the SAMPLE_STREAMOUTSTATS packet but the GDS copy was emitted after,
which means the availability bit might be TRUE before the GDS copy is
actually done.
Fix this by emitting the GDS copy before to ensure the availability is
TRUE for both results.
This fixes recent updates in
dEQP-VK.transform_feedback.primitives_generated_query.* because the
tests no longer wait for the fence.
Cc: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23080>
Commit c65bde7b1e introduced a regression where under certain
circumstances `front` may be NULL, thus leading to a crash. It's not
currently known what exactly causes `front` to become NULL, nor we can
revert the offending commit, because there had been too many unrelated
changes that now depend on this commit.
So until someone comes up with a proper fix, let's add a workaround so
instead of crashing we just return from the function early.
This commit was tested with the bug `8982` and helps with the crash
with no other noticeable problems.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/8982
Fixes: c65bde7b1e ("frontend/dri: inline __DRIdrawable in dri_drawable, make __DRIdrawable opaque")
Cc: mesa-stable
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23093>
Similar to nir_ssa_dest_init, but with fewer call sites to churn through.
This was done with the help of Coccinelle:
@@
expression A, B, C, D;
@@
-nir_ssa_dest_init_for_type(A, B, C, D);
+nir_ssa_dest_init_for_type(A, B, C);
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23078>
Since 624e799cc3 ("nir: Drop nir_ssa_def::name and nir_register::name"), SSA
defs don't have names, making the name argument unused. Drop it from the
signature and fix the call sites. This was done with the help of the following
Coccinelle semantic patch:
@@
expression A, B, C, D, E;
@@
-nir_ssa_dest_init(A, B, C, D, E);
+nir_ssa_dest_init(A, B, C, D);
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23078>
Include the expected and actual values in the errors -- since
very frequently we care about them to diagnose issues.
Since these helpers are meant to be inlined, also pull the
failure code out of the way into a separate function (not meant to
be inlined). This way, extra calls to to_string will not harm
the existing client code size. Verified this with GCC release build.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22977>
Most of the compressed writes are tracked by the driver, for
instances :
- blorp writes
- render target writes
But we don't have any tracking for storage images (which have gained
compression support on DG2+). So inspect the layout transition and
when we see a layout/access that can do writes outside of our driver
tracking, update the image state tracking.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/8946
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22988>
Fix issue by handling the OpString instructions when walking through
the preamble for validation.
The gl_spirv_validation() creates a vtn_builder() and walks the
instructions looking for a subset of the information. However
our current way to walk the instructions will also perform tracking
of OpLine/OpNoLine, that may make references to OpString instructions
that were being previously ignored by gl_spirv_validation().
This would cause the parsing to fail.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/9004
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22973>
It make sense to enable CS stall so that it guarantees that the fast
clear will start after tile cache flush has completed.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23063>
Not doing so all the reads/writes go to the scratch page on i915.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: f9fa09ec92 ("anv/image: Add ANV_IMAGE_MEMORY_BINDING_PRIVATE")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22957>
0x5698 is now reserved for future use
From Matt Roper in linux
3a38be31ec82 ("drm/i915/dg2: Drop one PCI ID")
Fixes: 65c9a810ee ("intel/pci_ids: Add dg2 0x5698 pci-id")
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22985>
In copy to buffer region, set dest rect to region size.
The rectangle must be block size adjusted in case of block compressed
format.
Fix test: dEQP-VK.api.copy_and_blit.core.image_to_buffer.regions
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
The transfer command "struct pvr_transfer_cmd" has support for
features not used by Vulkan: colour key, pattern, rop blit and
alpha blending
The whole "struct pvr_transfer_blit" can be removed. Also all code
related to transfer alpha blending can be removed.
This is an optimisation and doesn't fix any dEQP tests.
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
The mask should be inverted.
Fixes tests in dEQP-VK.api.copy_and_blit.* using the texel unwind workaround.
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
Fix the rectangle mappings used with texel unwind workaround (unaligned address).
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
The byte unwind workaround can be used when source texture virtual
address doesn't meet HW requirements (is unaligned) and the pixel
format can't be changed i.e. destination is compressed. If
destination texture is not compressed the simpler texel extend
workaround can be used.
Currently byte unwind workaround has bugs so removing the
workaround fixes tests in
dEQP-VK.api.copy_and_blit.core.blit_image.simple_tests.* when they
instead use texel extend workaround.
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
The rectangles in "struct pvr_rect_mapping" are unsigned so a
flipped rectangle mapping isn't possible. Add new struct members
flip_x and flip_y to specify flipped mapping.
Add support for flipped rectangles in transfer copy blit path.
Support for flipped rectangles in the clip blit path is not done
in this change.
The new booleans are false by default because transfer command
"struct pvr_transfer_cmd" is zeroed on allocation in
pvr_transfer_cmd_alloc (pvr_blit.c).
Fixes:
dEQP test case: dEQP-VK.api.copy_and_blit.core.blit_image.simple_tests
.mirror_xy.nearest
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
Block compressed formats with 3d twiddled memory layout not supported.
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
Twiddled surfaces don't use stride but printing info about ignored
stride is not useful on debug driver.
Signed-off-by: Oskar Rundgren <oskar.rundgren@imgtec.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22958>
