Instead, we replace it directly with nir_def. We could replace it with
nir_dest but the next commit gets rid of that so this avoids unnecessary
churn. Most of this commit was generated by sed:
sed -i -e 's/dest.dest.ssa/def/g' src/**/*.h src/**/*.c src/**/*.cpp
There were a few manual fixups required in the nir_legacy.c and
nir_from_ssa.c as nir_legacy_reg and nir_parallel_copy_entry both have a
similar pattern.
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24674>
In 9ffd00bcf1 ("nir_to_tgsi: Pack our tex coords into vec4
nir_tex_src_backend[12]"), Emma added a pair of back-end sources to
nir_tex_instr to allow complex lowering to be done in NIR. This adds a
tiny bit more hw-specific back-end information that a NIR lowering pass
can communicate to the back-end compiler.
While the opcode contains most of the information needed, some thing
such as the presence of offsets is currently only communicated via the
presence of specific source types in the source list. This information
is gone when the texture instruction is lowered to back-end sources.
Adding a backend_flags field fixes this by allowing the lowering pass to
communicate a small amount of side-band information if needed.
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22303>
Nothing produces them any more, so remove them from NIR. This massively reduces
the size of nir_src, which should improve performance all over.
nir_src size reduced from 56 bytes -> 40 bytes (pahole results on arm64, x86_64
should be similar.)
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24253>
CSE tries to collapse equal instructions, and collapsing two phis with incompatible dests is illegal.
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Fixes: 6bdce55c ("nir: Add a basic CSE pass")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19960>
`pred` is a pointer, for sufficiently large numbers these
being cast to int were both > 0 regardless of the order
of `data1` and `data2`.
Fixes: 523a28d3fe ("nir: add an instruction set API")
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19539>
Preserving information about inbounds access and
the required bit size for the bounds will help
with avoiding 64-bit operations when lowering io.
Signed-off-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16729>
This fixes nir_opt_cse miss replace a non-sparse tex instruction
with a sparse tex instruction and fail the nir_validate_shader().
Fixes: 3a7972f72a ("nir,spirv: add sparse texture fetches")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14362>
Use a single set and ensure dominance by checking after a equivalent
instruction is found.
Besides removing the need to copy a set, this also lets us resize the set
at the start of the pass in the next commit.
ministat (CSE only):
Difference at 95.0% confidence
-984.956 +/- 28.8559
-6.90075% +/- 0.190231%
(Student's t, pooled s = 26.9052)
ministat (entire run):
Difference at 95.0% confidence
-1246.1 +/- 257.253
-0.998972% +/- 0.205094%
(Student's t, pooled s = 239.863)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Co-authored-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6390>
This commit replaces the new_src parameter of nir_ssa_def_rewrite_uses()
with an SSA def, removes nir_ssa_def_rewrite_uses_ssa(), and rewrites
all the users as needed.
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Acked-by: Alyssa Rosenzweig <alyssa@collabora.com>
Acked-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9383>
Basically every pass in NIR uses nir_ssa_def_rewrite_uses which calls
nir_instr_rewrite_src which is fairly complex because it handles all
sorts of non-SSA cases. Since we already know a priori that every
source written by nir_ssa_def_rewrite_uses is SSA, we can check new_src
once at the top of the function and cut out all that complexity.
While we're at it, we expose a new SSA-only nir_ssa_def_rewrite_uses_ssa
helper which takes an SSA def which avoids the one SSA check. It's also
more convenient 90% of the time.
Compile time as tested by Rhys Perry <pendingchaos02@gmail.com>
Difference at 95.0% confidence
-797.166 +/- 418.649
-0.566174% +/- 0.296441%
(Student's t, pooled s = 325.459)
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8790>
We rename it to "modes" to make it clear that it may contain more than
one mode and adjust all the uses of nir_deref_instr::modes to attempt to
handle multiple modes.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6332>
A couple of these probably aren't strictly necessary but they won't
hurt. The one that's particularly tricky is a fixed-length array in
nir_search.h. However, to avoid blowing up the binary size of
nir_opt_algebraic by about 2x, we just assert that only small ops are
used.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6655>
xxhash is faster than fnv1a in almost all circumstances, so we're
switching to it globally.
Signed-off-by: Dmytro Nester <dmytro.nester@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4020>
These were missed when the fields got added. Added it everywhere where
texture_index got used and it made sense.
Found this in "The Surge 2", where the inliner does not copy the fields,
resulting in corruption and hangs.
Fixes: 3bd5457641 "nir: Add a lowering pass for non-uniform resource access"
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1203
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3246>
When I added this function, I was not sure if swizzles of immediate
values were a thing that occurred in NIR. The only existing user of
these functions is the partial redundancy elimination for compares.
Since comparison instructions are inherently scalar, this does not
occur.
However, a couple later patches, "nir/algebraic: Recognize
open-coded flrp(-1, 1, a) and flrp(1, -1, a)" combined with "intel/vec4:
Try to emit a single load for multiple 3-src instruction operands",
collaborate to create a few thousand instances.
No shader-db changes on any Intel platform.
v2: Handle the swizzle in nir_alu_srcs_negative_equal and leave
nir_const_value_negative_equal unchanged. Suggested by Jason.
v3: Correctly handle write masks. Add note (and assertion) that the
caller is responsible for various compatibility checks. The single
existing caller only calls this for combinations of scalar fadd and
float comparison instructions, so all of the requirements are met. A
later patch (intel/vec4: Try to emit a single load for multiple 3-src
instruction operands) will call this for sources of the same
instruction, so all of the requirements are met.
v4: Add unit test for nir_opt_comparison_pre that is fixed by this
commit.
Reviewed-by: Matt Turner <mattst88@gmail.com>
They indicate the operation does not cause overflow or underflow.
This is motivated by SPIR-V decorations NoSignedWrap and
NoUnsignedWrap.
Change the storage of `exact` to be a single bit, so they pack
together.
v2: Handle no_wrap in nir_instr_set. (Karol)
v3: Use two separate flags, since the NIR SSA values and certain
instructions are typeless, so just no_wrap would be insufficient
to know which one was referred to. (Connor)
v4: Don't use nir_instr_set to propagate the flags, unlike `exact`,
consider the instructions different if the flags have different
values. Fix hashing/comparing. (Jason)
Reviewed-by: Karol Herbst <kherbst@redhat.com> [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Before this change, we were searching for each instruction twice, once
when checking if it exists and once when figuring out where to insert
it. By using the new function, we can do everything we need to do in one
operation.
Compilation time numbers for my shader-db database:
Difference at 95.0% confidence
-4.04706 +/- 0.669508
-0.922142% +/- 0.151948%
(Student's t, pooled s = 0.95824)
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
v2: Instead of handling 3 sources as a special case, generalize with
loops to N sources. Suggested by Jason.
v3: Further generalize by only checking that number of sources is >= 2.
Suggested by Jason.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The meaning of the new name is that the first two sources are
commutative. Since this is only currently applied to two-source
operations, there is no change.
A future change will mark ffma as 2src_commutative.
It is also possible that future work will add 3src_commutative for
opcodes like fmin3.
v2: s/commutative_2src/2src_commutative/g. I had originally considered
this, but I discarded it because I did't want to deal with identifiers
that (should) start with 2. Jason suggested it in review, so we decided
that _2src_commutative would be used in nir_opcodes.py. Also add some
comments documenting what 2src_commutative means. Also suggested by
Jason.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Other nir_src_as_* functions just take a nir_src. It's not that much
more memory copying and the constness preserving really isn't worth the
cognitive dissonance.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
v2: remove & operator in a couple of memsets
add some memsets
v3: fixup lima
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
v2: Move bug fix in get_neg_instr from the next patch to this patch
(where it was intended to be in the first place). Noticed by Caio.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Values inside the offsets parameter of textureGatherOffsets are required to be
constants in the range of [GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET,
GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET].
As this range is never outside [-32, 31] for all existing drivers inside mesa,
we can simply store the offsets as a int8_t[4][2] array inside nir_tex_instr.
Right now only Nvidia hardware supports this in hardware, so we can turn this
on inside Nouveau for the NIR path as it is already enabled with the TGSI one.
v2: use memcpy instead of for loops
add missing bits to nir_instr_set
don't show offsets if they are all 0
v3: default offsets aren't all 0
v4: rename offsets -> tg4_offsets
rename nir_tex_instr_has_explicit_offsets -> nir_tex_instr_has_explicit_tg4_offsets
Signed-off-by: Karol Herbst <kherbst@redhat.com>
[28/716] Compiling C object 'src/compiler/nir/068b2c8@@nir@sta/nir_gather_xfb_info.c.o'.
../src/compiler/nir/nir_gather_xfb_info.c: In function ‘nir_gather_xfb_info’:
../src/compiler/nir/nir_gather_xfb_info.c:171:13: warning: variable ‘max_offset’ set but not used [-Wunused-but-set-variable]
unsigned max_offset[NIR_MAX_XFB_BUFFERS] = {0};
^~~~~~~~~~
[36/716] Compiling C object 'src/compiler/nir/068b2c8@@nir@sta/nir_instr_set.c.o'.
../src/compiler/nir/nir_instr_set.c:502:1: warning: ‘instr_each_src_and_dest_is_ssa’ defined but not used [-Wunused-function]
instr_each_src_and_dest_is_ssa(nir_instr *instr)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Everthing should be in ssa form when this is called. Checking
for it here is expensive so turn this into an assert instead.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
There is no need to hash the instruction twice, especially as we
end up adding it in the majority of cases.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These correspond directly to SPIR-V's OpPtrAccessChain. As such, they
treat whatever their parent gives them as if it's the first element in
some array and dereferences that array. If the parent is, itself, an
array deref, then the two indices can just be added together to get the
final array deref. However, it can also be used in cases where what you
have is a dereference to some random vec2 value somewhere. In this
case, we require a cast before the ptr_as_array and use the ptr_stride
field in the cast to provide a stride for the ptr_as_array derefs.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This commit adds support for 1-bit Booleans and integers. Booleans
obviously take a value of true or false. Because we have to define the
semantics of 1-bit signed and unsigned integers, we define uint1_t to
take values of 0 and 1 and int1_t to take values of 0 and -1. 1-bit
arithmetic is then well-defined in the usual way, just with fewer bits.
The definition of int1_t and uint1_t doesn't usually matter but we do
need something for purposes of constant folding.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We weren't returning at the end of the nir_isntr_type_deref case in
nir_instrs_equal and it was falling through to the default of false.
While we're at it, make the default unreachable because all statements
in the switch now have their own returns. Had we done that before, we
would have caught this bug a long time ago.
Fixes: 19a4662a54 "nir: Add a deref instruction type"
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Thomas Helland<thomashelland90@gmail.com>
