On GFX11, VRS rate images can't use linear tiling and the swizzle mode
must be either SW_Z or SW_R.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20333>
This is to indicate when an argument was loaded from VMEM
and needs a waitcnt before it can be used.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21696>
This patch will add support for dpb resize when low to high resolution
change/ svc use-cases.
With DPB tier1 type,vp9 svc decoder use cases are failed. This
Change will fix this[VCN1/VCN2].
Signed-off-by: SureshGuttula <suresh.guttula@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21548>
Modifying pitch for all LINEAR surface isn't correct;
the original change that modified surf_pitch was only
intended for YUV textures.
This fixes vkGetImageSubresourceLayout rowPitch return value
for VK_FORMAT_BC3_UNORM_BLOCK + VK_IMAGE_TILING_LINEAR.
Fixes: fcc499d5 (ac/surface: adjust gfx9.pitch[*] based on surf->blk_w)
v2: add check for UYVY format (Pierre-Eric)
v3: move blk_w division to above if check (Pierre-Eric)
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21595>
Instead of having ac_set_reg_cu_en that sets the register, replace it with
ac_apply_cu_en that only returns the modified register value,
which allows a large simplification in both drivers because a lot of code
becomes duplicated after it's switched to ac_apply_cu_en.
RADV also didn't apply it to a few registers. Fixed.
This removes 82 lines of code in total.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21641>
This crashed on Steam Deck because the memory type is LPDDR5 and it
wasn't not handled in the switch. It seems the kernel changed the
memory type returned for VanGogh because it used to work.
Fixes: aef7ea868f ("ac/gpu_info: handle LPDDR4 and 5 in ac_memory_ops_per_clock")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21627>
This will emulate VGT_ESGS_RING_ITEMSIZE, which does the multiplication
for us. It's beneficial to stop setting VGT_ESGS_RING_ITEMSIZE to reduce
context rolls, and also the register will be removed in the future.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21525>
For testing, the conformant behavior can be enabled by setting
conformant_trunc_coord to true manually and running this to enable
the conformant behavior in hw:
umr -w *.*.regTA_CNTL2 0x40000
The layer index rounding and TRUNC_COORD resetting workarounds can disabled
in the shader compiler.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21525>
base_mip_width is used in si_compute_copy_image when the
SI_IMAGE_ACCESS_BLOCK_FORMAT_AS_UINT flag is used.
width = tex->surface.u.gfx9.base_mip_width;
This will be incorrect if we don't adjust it. For instance,
with a 260x256 image, surf_pitch and base_mip_width are
320 before surf_pitch is updated to be 192.
Both need to match, or computing the width from base_mip_width
leads to incorrect result.
Cc: mesa-stable
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21253>
Vulkan spec 18.8. Primitives Generated Queries:
When a generated primitive query for a vertex stream is active,
the primitives-generated count is incremented every time a
primitive emitted to that stream reaches the transform feedback
stage, whether or not transform feedback is active.
We can see the order of stages in chapter 27 Fixed-Function
Vertex Post-Processing, which shows that the transform feedback
stage is before rasterization (and therefore culling).
Conclusion is that culled primitives should be included
in the primitives generated query.
This commit makes sure to emit the primitives generated query
code before culling and uses the input primitive count passed
to the current wave instead of the exec mask after culling.
Cc: mesa-stable
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21037>
ACO does not support 8bit ALU ops.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20691>
For last VGT stage to export parameter outputs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20691>
Used by last VGT stage to export position related outputs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20691>
Mesh shader primitive export is left unchanged because it needs
extra changes for per primitive output export when export
primitive.
Mesh shader will use second channel of primitive export.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20691>
The face culling algorithm should have been disabled for
conservative overestimation because it already
(mistakenly) removed some close-to-zero area triangles.
Now that the driver disables it in that case,
let's always remove zero-area triangles.
This only costs +2 SALU instructions.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20987>
