The extension is used by GLX_MESA_query_renderer, which
can be provided for by hardware and software drivers.
v2: Use designated initializers.
v3: Move drisw_query_renderer_*() to dri2_query_renderer.c
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Generate a GL error and return rather than crashing on a null
ctx->Driver.CopyImageSubData pointer (gallium). This allows apitraces
with glCopyImageSubData() calls to continue rather than crash.
Plus, fix a comment typo.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Similar to the problem described in 2c50212b14, if we copy the clear
value through a regular assignment via a floating point value, then if an
integer clear value is being used that happens to contain a signalling NaN
value then it would get converted to a quiet NaN when stored via the x87
floating-point registers. This would corrupt the integer value. Instead we
should use a memcpy to ensure the exact bit representation is preserved.
This bug can be triggered on 32-bit builds with optimisations by using an
integer clear color with a value like 0x7f817f81.
Reviewed-by: Matt Turner <mattst88@gmail.com>
V2: Set force_writemask_all on ADD; this *is* necessary in the VS case
too.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For now, assume that the addressed sampler can be in any of the
16-sampler banks. If we preserved range information this far, we
could avoid emitting these instructions if the sampler were known
to be contained within one bank.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're about to be using this infrastructure to build descriptors in
src1 of non-send instructions, when preparing to do an indirect send.
Don't accidentally clobber the conditionalmod field of those
instructions with SFID bits, which aren't part of the descriptor.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
This provides a reasonable place to enforce the hardware restriction
that indirect descriptors must be in a0.0
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
The pass breaks live ranges of virtual registers by allocating new
registers when it sees an assignment to a virtual GRF it's already seen
written.
total instructions in shared programs: 4337879 -> 4335014 (-0.07%)
instructions in affected programs: 343865 -> 341000 (-0.83%)
GAINED: 46
LOST: 1
[mattst88]: Make pass not break in presence of control flow.
invalidate_live_intervals() only if progress.
Fix up delta_x/delta_y.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Commit c66d928f2c ("i965: Enable INTDIV
in SIMD16 mode.") began using generate_math_gen6 to break SIMD16 INTDIV
into two SIMD8 operations.
generate_math_gen6 takes two registers - for unary operations, we pass
ARF null for the second operand. Prior to Broadwell, real operands were
always GRF. But now they can be IMM as well.
So, check for != ARF instead of == GRF.
+12 piglits.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reverts commit af13cf609f, which
appears to cause huge performance problems on Ivybridge. I'd missed
that the FFTID bits are in the low byte. The documentation doesn't
indicate that the URB write message header actually wants FFTID - it
just labels those bits as "Reserved." But it appears necessary.
This does slightly more than revert the original change: originally,
Broadwell had separate code generation, which used MOV, and this patch
only changed it for Gen4-7. Now that both are unified, reverting this
also makes Broadwell use OR. Which should be fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The extension says GL 4.0 is required. We'll meet the spirit
of that restriction by enabling on just those generations which will
soon support GL 4.0 (Gen7+), although it's technically supportable on
all generations.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The quality level (fine/coarse/dont-care) is plumbed through to the
generator as a constant in src1.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The quadop-based method we currently use on all chipsets already
provides the fine version of the derivatives.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
Reviewed-by: Roland Scheidegger <sroland@vmware.com> (v1)
v2: Reuse opcode gaps as suggested by Marek
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This extension is identical to NV_texture_barrier. Alias
glTextureBarrier to the existing glTextureBarrierNV and use the existing
NV_texture_barrier extension bit.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This matches the name of the dd hook. Also convert a couple of nearby
dd implementations to lowercase + underscore as is now the standard.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Right now we decide which kernels to use and the GRF start offsets in
one place and emit the kernel pointers later. The logic of how to map
8, 16 and 32 kernels to kernel start pointers follows the same logic as which
GRF start offsets to use, so lets figure out these two things in one place.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
This maintains a list of all TBOs in a pipe_context.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The EGL_EXT_image_dma_buf_import specification was revised (according to
its revision history) on Dec 5th, 2013, for EGL to not take ownership of
the file descriptors.
Do not close the file descriptors passed in to eglCreateImageKHR with
EGL_LINUX_DMA_BUF_EXT target.
It is assumed, that the drivers, which ultimately process the file
descriptors, do not close or modify them in any way either. This avoids
the need to dup(), as it seems we would only need to just close the
dup'd file descriptors right after.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76188
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
