We seem to end up w/ duplication between compiler/Makefile.sources and
compiler/glsl/Makefile.sources. The latter appears unused. Delete it.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This parameter is equivalent to the corresponding OpenGL implementation
limit which is in texels, not bytes.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is already used internally in si_resource_copy_region for compressed
textures, so the only real change here is the adjusted surface size
computation.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
We will write our own version of texsubimage for PBO uploads, and we will
want to call that here as well.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Use instancing to generate two triangles for each destination layer and use
a geometry shader to route the layer index.
v2:
- directly write layer in VS if supported by the driver (Marek Olšák)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Create a PIPE_BUFFER sampler view on the pixel-unpack buffer, and draw
the image on the texture with a fragment shader that maps fragment
coordinates to buffer coordinates.
Modifications by Nicolai Hähnle:
- various cleanups and fixes (e.g. error handling, corner cases)
- split try_pbo_upload into two functions, which will allow code to be
shared with compressed texture uploads
- modify the source format selection to only test for support against
the PIPE_BUFFER target
v2:
- update handling of TGSI_SEMANTIC_POSITION for recent changes in master
- MaxTextureBufferSize is number of texels, not bytes (Ilia Mirkin)
- only enable when integers are supported (Marek Olšák)
- try harder to hit the TextureBufferOffsetAlignment
- remove unnecessary MOV from the fragment shader
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
We need to tell the address generation functions about the dimensionality of
the texture to correctly implement the part of Section 3.8.1 (Texture Image
Specification) of the OpenGL 2.1 specification which says:
"For the purposes of decoding the texture image, TexImage2D is
equivalent to calling TexImage3D with corresponding arguments
and depth of 1, except that
...
* UNPACK SKIP IMAGES is ignored."
Fixes a low impact bug that was found by chance while browsing the spec and
extending piglit tests.
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This cap indicates whether pipe->create_surface can reinterpret a texture
as a surface with a format of different block width/height (but equal
block size).
v2: fix whitespace
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This cap indicates that the driver only supports R, RG, RGB and RGBA
formats for PIPE_BUFFER sampler views.
v2: move into "unsupported features" section for nouveau (Ilia Mirkin)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
When set to a truish value, this globally disables the minmax cache for all
buffer objects.
No #ifdef DEBUG guards because this option can be interesting for
benchmarking.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When applications stream their index buffers, the caches for those BOs become
useless and add overhead, so we want to disable them. The tricky part is
coming up with the right heuristic for *when* to disable them.
The first question is which hit rate to aim for. Since I'm not aware of any
interesting borderline applications that do something like "draw two or three
times for each upload", I just kept it simple.
The second question is how soon we should give up on the caching. Applications
might have a warm-up phase where they fill a buffer gradually but then keep
reusing it. For this reason, I count the number of indices that hit and miss
(instead of the number of calls that hit or miss), since comparing that to
the size of the buffer makes sense.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some games developers are unaware that an index buffer in a VBO still needs
to be read by the CPU if some varying data comes from a user pointer (unless
glDrawRangeElements and friends are used). This is particularly bad when
they tell us that the index buffer should live in VRAM.
This cache helps, e.g. lifting This War Of Mine (a particularly bad
offender) from under 10fps to slightly over 20fps on a Carrizo.
Note that there is nothing prohibiting a user from rendering from multiple
threads simultaneously with the same index buffer, hence the locking. (The
internal buffer map taken for the buffer still leads to a race, but at least
the locks are a move in the right direction.)
v2: disable the cache on USAGE_TEXTURE_BUFFER as well (Chris Forbes)
v3:
- use bool instead of GLboolean for MinMaxCacheDirty (Ian Romanick)
- replace the sticky USAGE_PERSISTENT_WRITE_MAP bit by a direct
AccessFlags check
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz> (v2)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We will add more code for caching/memoization. Moving the existing code
into its own file helps keep things modular.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Note that the conversion of the clear data (when data != NULL) can fail due
to an out of memory condition, but it does not check any error conditions
mandated by the spec. Therefore, it is safe to skip when size == 0.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We will want to disable minmax index caching for buffers that are used in this
way.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We will want to disable minmax index caching for buffers that are used in this
way.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The scaling list should be filled out with zig zag scan
v2: integrate zig zag scan for list 4x4 to vl(Christian)
v3: move list determination out from the loop(Ilia)
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
GEN8_SURFACE_AUX_MODE_NONE is 0, so this is a no-op.
Yet, this also makes it clear that we can compare aux_mode to the
other GEN8_SURFACE_AUX_MODE_ values. We will want to compare to
GEN8_SURFACE_AUX_MODE_HIZ.
v2: Some very minor cherry-pick conflicts due to moving it around in the series.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
When generating a sub-determinate matrix, a 3-element swizzle array was
indexed with clever inline boolean logic. Unfortunately, when i and j
are both 3, the index overruns the array, smashing the next variable on
the stack.
For 64 bit builds, the alignment of the 3-element unsigned array leaves
32 bits of spacing before the next local variable, hiding this bug. On
i386, a subcolumn pointer was smashed then dereferenced.
anv_descriptor_set_destroy uses the descriptor sets's set_layout member
to iterate the set's buffer views. However, the set_layout reference
may have previously been freed.
On 64 bit builds, this bug generated valgrind errors but did not affect
CTS test results. On 32 bit builds, it reliably produces assertions and
memory corruption.
Whether multisampling is turned on depends, in part, on whether
attachments are themselves multisample surfaces. However when there are
no attachments, we should rely on the default geometry for this.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This fixes dEQP-GLES31.functional.fbo.completeness.no_attachments
When the width or height are 0, the framebuffer is incomplete. We may
also not have been passing the new state down to the driver when the
widths/heights/etc changed. Make sure to dirty the state so that the
framebuffer state is revalidated at draw time.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
In case we have a draw buffer without attachments, we should be looking
at the default number of samples.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This is kind-of silly. We *really* need to do a better job of making sure
all objects have all their default values set. We probably also want to,
eventually, put everything into the BO (to save memory) and, more
specifically, make the GPU write the "ready" flag. That way GetFenceStatus
won't ever have to call into the kernel.
This fixes a crash in pb_cache_release_all_buffers.
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
This fixes it.
States which also need to be taken into account:
- SPI color formats - each down-conversion format supports only a limited set
of SPI formats
- whether MSAA resolving and logic op are enabled
These need special handling:
- blending
- disabled channels
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The motivation is to simplify the Stoney RB+ code.
Intensity is already treated as red except here.
No piglit regressions.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The equivalent of the last patch for the hash table. I'm not aware of
any issues this fixes.
v2:
- use entry_is_deleted (Timothy)
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
When we delete entries in the hash set, we mark them "deleted" by
setting their key to the deleted_key, which points to a dummy
deleted_key_value. When searching for an entry, we normally skip over
those, but set_add() had some code for searching for duplicate entries
which forgot to skip over deleted entries. This led to a segfault inside
the NIR vectorization pass, since its key comparison function
interpreted the memory where deleted_key_value resides as a pointer and
tried to dereference it.
v2:
- add better commit message (Timothy)
- use entry_is_deleted (Timothy)
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
This reverts commit ab30426e33.
Apparently the memory isn't quite as aligned when this gets called
as it should be, causing crashes. (Albeit this looks independent
from this code, should crash just as well if ssse3 is enabled when
compiling without this patch.)
https://bugs.freedesktop.org/show_bug.cgi?id=93962
Add support for these opcodes, the conversion functions were already
there albeit need some new packing stuff.
Just like the tgsi version, piglit won't like it for all the same
reasons, so it's disabled (UP2H passes piglit arb_shader_language_packing
tests, albeit since PK2H won't due to those rounding differences I don't
know if that one works or not as the piglit test is rather difficult to
deal with).
Reviewed-by: Brian Paul <brianp@vmware.com>
