This requires enabling the optional GL provoking vertex behavior for quads.
+ some cosmetic changes, so that the register is set exactly the same as
on r600.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
The fragment shader multiplies the alpha channel with gl_SampleMaskIn.
If blending is enabled, it looks like MSAA.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This will be used for line and polygon smoothing.
This is GCN-only even though it's in shared code.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
I have to use the BFE instrinsics, because BFE is one of the most complex
instructions that can't be matched easily. BFE has 3 conditional branches
and one of them is quite big.
In the isel DAG, lowered BFE has 27 nodes (including leafs).
Now that piglit is no longer falling back to old compiler for any tests,
we can remove it. Hurray \o/
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Deadlock can occur if we schedule an address register write, yet some
instructions which depend on that address register value also depend on
other unscheduled instructions that depend on a different address
register value. To solve this, before scheduling an address register
write, ensure that all the other dependencies of the instructions which
consume this address register are already scheduled.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Add an array_insert() macro to simplify inserting into dynamically sized
arrays, add a comment, and remove unused prototype inherited from the
original freedreno.git/fdre-a3xx test code, etc.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For example if width were 65, the first slice would get 96 while the
second would get 32. However the hardware appears to expect the second
pitch to be 64, based on halving the 96 (and aligning up to 32).
This fixes texelFetch piglit tests on a3xx below a certain size. Going
higher they break again, but most likely due to unrelated reasons.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
We only program in one layer size per texture, so that means that all
levels must share one size. This makes the piglit test
bin/texelFetch fs sampler2DArray
have the same breakage as its non-array version instead of being
completely off, and makes
bin/ext_texture_array-gen-mipmap
start passing.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Fix typo in comment introduced by 70dc8a
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Jose Fonseca <jfonseca@vmware.com>
std::unique_ptr takes ownership of MM, and a double delete could ensure
in case of an error, as pointed out by Chris Vine in
https://bugs.freedesktop.org/show_bug.cgi?id=89387
Reviewed-by: Chris Vine <chris@cvine.freeserve.co.uk>
The maximum value of a Gallium HUD's panel is automatically adjusted
when the current value is greater than the max. If we set the
pipe_query_driver_info::max_value to UINT64_MAX, the maximum value is
never adjusted and this results in a flat line instead of a pretty curve
which is correctly scaled.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Lets define R600_MAX_VIEWPORTS instead of using 16 here and there
in the code when looping through viewports and scissors. It is
easier to understand what this number represents.
v2: Missed a case where R600_MAX_VIEWPORTS should have been used.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
This fixes the GL_COMPRESSED_RED_RGTC1 part of piglit's rgtc-teximage-01
test as well as the precision part of Wine's 3dc format test (fd.o bug
89156).
The Z component seems to contain a lower precision version of the
result, probably a temporary value from the decompression computation.
The Y and W component contain different data that depends on the input
values as well, but I could not make sense of them (Not that I tried
very hard).
GL_COMPRESSED_SIGNED_RED_RGTC1 still seems to have precision problems in
piglit, and both formats are affected by a compiler bug if they're
sampled by the shader with a swizzle other than .xyzw. Wine uses .xxxx,
which returns random garbage.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89156
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Cc: 10.5 10.4 <mesa-stable@lists.freedesktop.org>
This means dropping CL_FP_DENORM from the current return value.
v2:
- Add comments about minimum values for OpenCL 1.2.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
This fixes ARB_texture_query_levels to actually return the desired
value.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Fixes: 1f3ca56b ("freedreno: use util_copy_framebuffer_state()")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Cc: "10.4 10.5" <mesa-stable@lists.freedesktop.org>
Now that relative-dst works, we should never fall back to the old
compiler. (Which is almost true, other than a couple edge case sched
fails in piglit).
So replace glsl130 flag to force GLSL 130 and integers on a3xx/a4xx with
a glsl120 flag to force GLSL 120 and !integers.
If this commit breaks any game/app/etc use FD_MESA_DEBUG=glsl120 as a
workaround and please let me know.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Enable the 'sphinx.ext.graphviz' extension, and add in a section for
driver specific docs, with freedreno compiler docs beneath. The
goal is for more complete compiler docs, and hopefully some docs about
other parts of the driver (such as how tiling works, etc).
Note that there is also a Distribution -> Drivers section. Although
that appears to be simply just a list of drivers. Not sure if that
should move under the 'Drivers' section or left alone. I did add a
one-line section for freedreno in the existing Distribution -> Drivers
section.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
To simplify RA, assign arrays that are written to first. Since enough
dependency information is in the graph to preserve order of reads and
writes of array, so all SSA names for the array collapse into one, just
assign the entire thing by array-id.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The meta-deref instruction doesn't really do what we need for relative
destination. Instead, since each instruction can reference at most a
single address value, track the dependency on the address register via
instr->address. This lets us express the dependency regardless of
whether it is used for dst and/or src.
The foreach_ssa_src{_n} iterator macros now also iterates the address
register so, at least in SSA form, the address register behaves as an
additional virtual src to the instruction. Which is pretty much what
we want, as far as scheduling/etc.
TODO:
For now, the foreach_src{_n} iterators are unchanged. We could wrap
the address in an ir3_register and make the foreach_src_{_n} iterators
behave the same way. But that seems unnecessary at this point, since
we mainly care about the address dependency when in SSA form.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
I remembered that we are using c99.. which makes some sugary iterator
macros easier. So introduce iterator macros to iterate all src
registers and all SSA src instructions. The _n variants also return
the src #, since there are a handful of places that need this.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
For cat1 instructions, use reg() as well for relative src, to ensure
proper accounting of register usage. Also, for relative instructions,
use reg->size rather than reg->wrmask to determine the number of
components read/written.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
