a variable with a component offset may span multiple slots, and this cannot
be inferred from its type alone (e.g., compacted clip+cull distances)
cc: mesa-stable
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24163>
(cherry picked from commit 59396eefe6)
Currently we don't properly support using he two IDX registers in the
same ALU CF, so work around this by enforcing a new CF if both indices
are used.
Fixes: d21054b4bc
r600/sfn: Add pass to split addess and index register loads
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24297>
(cherry picked from commit 1d4dd664e0)
Same cause as for other R8G8 formats - msaa resolve via
blit event causes gpu fault.
Fixes:
dEQP-VK.api.image_clearing.*.clear_color_attachment.*.r8g8_srgb_*
Fixes: 029919f3c8
("tu: allow using resolve engine for SRGB MSAA resolves")
Cc: mesa-stable
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24277>
(cherry picked from commit eeb1fd90fc)
With PIPE_CAP_CLEAR_TEXTURE removed, we need to set clear_texture to NULL
on svga vgpu9 device so it can use the fallback path.
Fixes: a1eabeff66 ("gallium: remove PIPE_CAP_CLEAR_TEXTURE")
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24264>
(cherry picked from commit 9c17d9df43)
Lavapipe has switched to layer push descriptor support atop descriptor
updates internally since 12a7fc51c7, so
it must skip retrieving immutable samplers from the write info even if
the update call itself is blessed by the spec to not hit that case.
Fixes: 12a7fc51c7 ("lavapipe: Rework descriptor handling")
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24263>
(cherry picked from commit 8cb7bab341)
Fixes: 90a39cac87 ("intel/blorp: Emit compute program based on BLORP_BATCH_USE_COMPUTE")
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23934>
(cherry picked from commit e7e7042093)
We might need more push uniforms (FAU) than the currently bound program. Update
that too for correct results on v9.
Fixes: c282f80c98 ("panfrost: Fix transform feedback on v9")
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24198>
(cherry picked from commit ac51cc12b1)
Without SP_FS_CTRL_REG0.LODPIXMASK quad ops don't get values from
helper invocations, but from the current one.
Fixes:
dEQP-VK.glsl.derivate.dfdxsubgroup.*
dEQP-VK.glsl.derivate.dfdysubgroup.*
Cc: mesa-stable
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24211>
(cherry picked from commit a0d426370d)
That's the "real" name of the field.
It enables ALL helper invocations in a quad, which is necessary for
fine derivatives and quad subgroup ops.
While PIXLODENABLE by itself enables only 3 out 4 fragments in a quad.
Cc: mesa-stable
Signed-off-by: Danylo Piliaiev <dpiliaiev@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24211>
(cherry picked from commit 696f37f5c3)
Do not try to determine the shader stage from the compiled shader
variant, which may be NULL after compile failure. Instead, get it
from the NIR shader.
Fixes a segfault when trying to evaluate etna_shader_stage(NULL)
after compile failure.
Suggested-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Fixes: 3d49619071 ("etnaviv: add support for performance warnings")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24178>
(cherry picked from commit f626605cbf)
Some platforms require us to re-emit 3DSTATE_DS before every 3DPRIMITIVE
when tessellation is enabled. See workaround 14019750404.
Cc: 23.2 <mesa-stable>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24150>
(cherry picked from commit 283e3acd3a)
It turns out the hardware doesn't save the whole state on a context
switch, as the kernel expects when it creates the golden context.
For some HW units, only the state that was explicitly programmed will be
part of it, so we need to make sure mesh shading is disabled on context
creation, or we risk being context switched with an application that
uses mesh, and when ours gets to run again, the mesh state won't be
reset, and submitting a legacy 3D pipeline while the HW thinks mesh is
enabled causes us to hang.
Cc: 23.2 <mesa-stable>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24150>
(cherry picked from commit 50d68f74b5)
We were using a stale FAU buffer which meant we wrote to garbage addresses. I'm
guessing this was fallout from the big sysval rework but not 100% sure.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Cc: mesa-stable
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24199>
(cherry picked from commit c282f80c98)
iris needs to emit a PIPE_CONTROL_INSTRUCTION_INVALIDATE for the
aforementioned WA.
Fixes: 83716b08c ('iris: migrate WA 14013910100 to use the WA framework')
Signed-off-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24171>
(cherry picked from commit 07a9585898)
DIV_ROUND_UP is the correct replacement for ALIGN_TO.
Fixes: ba83c1e2
Signed-off-by: David Rosca <nowrep@gmail.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24127>
(cherry picked from commit d408ae88db)
Port of code from iris.
Original author: Nanley Chery
Helps with fast_color_clear@fcc-write-after-clear
Cc: mesa-stable
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24135>
(cherry picked from commit 6e87b277bd)
This was missed in 0bf6dcb785
There is a loop which iterates over a temp array. NIR optimization
moves the real work out of the loop and what remains are just ALU ops
with undefs. So after converting undefs to zero, the ALU ops are
optimized out and DCE kills the loop. This is a good thing in
general and we don't fail the linking due to the loop presence.
However than we hit the shader constants and ALU limits later :-(
So from dEQP POW we go from NotSupported to Fail.
Fixes: 0bf6dcb785
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24134>
(cherry picked from commit 0a2a7bfd19)
Convert it to an opt-in for backends to prefer and use nir_load_texture_scale
instead of txs for nir lowerings.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Suggested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24054>
Ben prefers that we use the firmware method where possible.
Cc: mesa-stable
Signed-off-by: Karol Herbst <git@karolherbst.de>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: M Henning <drawoc@darkrefraction.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23802>
