pipe_surface_width and pipe_surface_height helpers actually need
a pipe surface with a texture attached instead of just passing
directly the pipe_surface we get from the st.
The compressed formats are still broken unfortunatelly, so add them
to CI fails for now.
Partial fix for: 9d359c6d10
Signed-off-by: Pavel Ondračka <pavel.ondracka@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34087>
Enabling this with shaders compiled separately through pipeline
libraries fails because we currently only enable it for VS and the
associated FS stage ends up with a non compatible VUE map.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34173>
The damage region can be useful to optimize the "resolve" step that we have on
imx6q (GC2000) because there isn't any tiling compatible with both render and
scanout or an any GPU when scanning out a linear buffer since we don't support
linear PE.
This improves fps for e.g `weston-simple-egl` by factor 2 (~30 fps -> ~60 fps).
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33226>
Introduce etna_align_box_for_rs(..) that allows us to apply RS restrictions
to a pipe_box. Switch etna_transfer_map(..) to it.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33226>
When updating delays, we'd update all dst regs based on reg_elems.
However, when wrmask has gaps, this would update delays for regs that
aren't actually written. Fix this by skipping regs for which the
corresponding wrmask bit is zero.
Note that this wasn't just a performance issue but could result in
illegal code because the delay is reset to zero for tex/sfu
instructions. For example, the following (post-legalization) code was
observed in the wild:
(rpt1)add.f r1.w, (r)r2.w, (r)c3.z
sam.base0 (f32)(w)r2.x, r3.y, s#0, t#1
rcp r2.x, r2.x
Here, the add would result in a required delay for r2.x which would then
be cleared by the sam (even though it doesn't write to it), resulting in
insufficient delay before the rcp.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Fixes: 61b2bd861f ("ir3: Rewrite nop insertion")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34107>
kill_sched would consider blocks that start right after the current one
as starting before it due to an off-by-one error. This resulted in
unnecessary branches being inserted.
Signed-off-by: Job Noorman <jnoorman@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34110>
Currently blorp assumes that copies of depth/stencil is restricted
to/from depth/stencil formats. We want to allow color<->depth copies.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Acked-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31983>
Otherwise this will lead to scratch intrinsics for calls/returns.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Acked-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31983>
The call looks up a Program and creates it if it doesn't
already exist. However we weren't locking the hash between looking
up the name and adding it to the hash so it could be possible
another thread also generated the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Fixes: 842c91300f ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
The call looks up an ATIShader and creates it if it doesn't
already exist. However we weren't locking the hash between looking
up the name and adding it to the hash so it could be possible
another thread also generated the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Fixes: 842c91300f ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
The calls look up a renderbuffer and create it if it doesn't
already exist. However they weren't locking the hash between looking
up the name and adding it to the hash so it could be possible
another thread also generated the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Fixes: 842c91300f ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
The calls look up a framebuffer and create it if it doesn't
already exist. However they weren't locking the hash between looking
up the name and adding it to the hash so it could be possible
another thread also generated the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Fixes: 842c91300f ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
Deleting a sampler object will only cause it to be unbound from the
current context. To avoid reusing something that it still bound in
another context we need to check the DeletePending flag first.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Fixes: 842c9130 ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
The calls look up a texture object and create it if it doesn't
already exist. However they weren't locking the hash between looking
up the name and adding it to the hash so it could be possible
another thread also generated the same name.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Fixes: 842c9130 ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
Deleting a buffer object will only cause it to be unbound from the
current context. To avoid reusing something that it still bound in
another context we need to check the DeletePending flag first.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12810
Fixes: 842c91300f ("mesa: enable GL name reuse by default for all drivers except virgl")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34091>
The values already use BRW, make it consistent.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33664>
Will be useful for testing BFloat16 in later patches. No change
expected to the compiler itself.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Rohan Garg <rohan.garg@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33664>
After 8fa70cfcfd ("spirv: Use the right bit-size for spec constant
ops") the bit-size will already be adjusted based on the sources, and
this will take care of Convert operations too.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34119>
Allow us to parse instructions in a form we currently generate
```
dpas.8x8(8) g55<1>F g47<1,1,0>F g31<1,1,0>HF g39<1,1,0>HF { align1 WE_all 1Q $4 };
```
Regions are not really needed, but this will be handled in a later patch
(that will also stop printing the regions).
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Rohan Garg <rohan.garg@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34031>
The spec allows to create aliased disjoint image for a specific plane of
a multi-planar image, and the format can be R8. When querying memory
requirement of such image, VkImagePlaneMemoryRequirementsInfo is not
required to be chained although it has the disjoint bit.
This change fixes to look for aspect info from plane memory info only
when that's chained. The implementation can be passive here as the spec
VU has sufficient guarantees for the validity around. See below VU for
details:
- VUID-VkImageMemoryRequirementsInfo2-image-01589
- VUID-VkImageMemoryRequirementsInfo2-image-01590
- VUID-VkImageMemoryRequirementsInfo2-image-02279
- VUID-VkImageMemoryRequirementsInfo2-image-02280
Meanwhile, the existing disjoint check for size info is kept as is for
the special handling of VK_FORMAT_D32_SFLOAT_S8_UINT.
Test: dEQP-VK.ycbcr.plane_view.memory_alias.* pass with venus-on-panvk
Fixes: 412c286331 ("panvk: Enable multiplane images and image views")
Reviewed-by: Rebecca Mckeever <rebecca.mckeever@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34134>
house protocols
- Remove some duplicate definitions (replaced with virgl_hw.h include,
which is also represented in gfxstream host code)
- Also removed the capset_ids from virtgpu_gfxstream_protocol.h. They
aren't needed to build guest-side driver, and are planned to be merged
to virtgpu_drm.h
Reviewed-By: Gurchetan Singh <gurchetansingh@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34116>
Per Vulkan spec 7.9. Host Write Ordering Guarantees, queue submission
commands automatically perform a domain operation from host to device
for all writes performed before the command executes. That is to say,
host updates to the mappings can occur after the end of the command
recording and must be flushed implicitly at submission boundary.
Before this change, necessary cache flushes could be missed once the
app starts reusing pre-recorded command buffers. e.g. a simple buffer
copy cmd while the app only updates the source buffer mapping in
different submissions. This changes backs out most of the current
version of cache flush reduction while still assigning LATEST_FLUSH_ID
to at least the final batch itself. This aligns with panfrost_batch
submit behavior on the gallium side.
Test: dEQP-VK.synchronization*.timeline_semaphore.* pass w/o flakiness
via venus-on-panvk
Fixes: 28e4d22497 ("panvk/csf: Pass a non-zero flush-id to benefit from cache flush reduction")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34093>
We can strip the alias bit as the memory requirements are identical
between the bound image and the aliased image per spec.
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/34135>
