For example only some UCPs may be used by the shader, triggering asserts
that too many consts are being uploaded.
While we're at it, also fix the const size when loading UCPs, since
otherwise it doesn't correspond to what the shader is actually using.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5752>
Don't lower to offsets, instead use nir_lower_explicit_io here and
use actual pointers for UBO's and SSBO's. This makes
KHR_variable_pointers trivial. This also fixes asserts with shared
variables, which are now supposed to be lowered with
nir_lower_explicit_io.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5684>
V3D has a bit to set the line caps to be perpendicular to the line
rather than aligned to the edges of the framebuffer. I don’t know what
the disadvantages are of enabling this, but I noticed by experimentation
that enabling line smoothing on the Intel driver also enables nicer line
caps, so it seems nice to enable it here too.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5624>
When line smoothing is enabled, the driver now increases the width of
the line so that it can add some semi-transparent pixels to either side
of the line. A lowering pass is added which modifies the alpha component
of every write to fragment output 0 so that if the fragment is outside
the width of the line then the alpha is reduced. It additionally
discards fragments that are completely invisible. It might seem bad to
use discard on a tiled renderer but the assumption is that any bad
effects from using discard will also happen anyway because of enabling
alpha blending.
v2: Disable the line smoothing pass entirely when the framebuffer
contains an integer colour output or one with no alpha channel.
Calculate the coverage once upfront and store in a global variable
instead of calculating each time an output write is modified. Also
do the conditional discard once upfront.
v3: Don’t check whether the output buffer has an alpha channel. Only
look at output 0. Use aa_line_width intrinsic instead of calculating
the real line width in the shader. Clamp the coverage as part of the
global variable, not per output write.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5624>
The first intrinsic is intended to expose the value set by glLineWidth
to shaders internally. The second intrinsic exposes the value actually
sent to the hardware. This may be wider than the first one in order to
implement anti-aliasing. These will be used in later patches to
implement a line smoothing lowering pass.
v2: Add a second intrinsic for the expanded line width for
anti-aliasing.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5624>
The line coord is a coordinate along the axis perpendicular to the line.
It is in the range [0,1] between the two edges of the line. It is
available at least on Broadcom hardware.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5624>
perf_cfg is enough - it already contains almost all necessary
information and is constructed in a more optimal way (O(n) vs O(n^2)
- it uses hash table to build the unique counter list).
"Almost all", because it doesn't contain OA raw counters, but
we should have not exposed them anyway. Quoting Mark Janes:
"I see no reason to include the OA raw counters in the list that
are provided to the user. They are unusable.
The MDAPI library can be used to configure raw counters in a way
that provides esoteric metrics, but that library is written against
INTEL_performance_query."
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5399>
This is necessary now that the compiler respects centroid interpolation,
even in non-MSAA mode. Otherwise the interpolation doesn't work. Fixes a
bunch of dEQP centroid transform feedback tests.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5778>
No drivers are using this anymore so we can delete it and not keep
maintaining this legacy code-path. If any drivers want this in the
future, they should use nir_lower_varst_to_explicit_types followed by
nir_lower_explicit_io.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
Gallium drivers should never see nir_var_uniform because gallium lowers
regular uniforms to a UBO. No GL driver should ever see either
nir_var_mem_shared because that's lowered in GLSL IR.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
Gallium drivers should never see nir_var_uniform because gallium lowers
regular uniforms to a UBO. No GL driver should ever see either
nir_var_mem_shared because that's lowered in GLSL IR.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
Gallium drivers should never see nir_var_uniform because gallium lowers
regular uniforms to a UBO. No GL driver should ever see either
nir_var_mem_shared because that's lowered in GLSL IR.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
Gallium drivers should never see nir_var_uniform because gallium lowers
regular uniforms to a UBO. No GL driver should ever see either
nir_var_mem_shared because that's lowered in GLSL IR.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
Gallium drivers should never see nir_var_uniform because gallium lowers
regular uniforms to a UBO. No GL driver should ever see either
nir_var_mem_shared because that's lowered in GLSL IR.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
Gallium drivers should never see nir_var_uniform because gallium lowers
regular uniforms to a UBO. No GL driver should ever see either
nir_var_mem_shared because that's lowered in GLSL IR.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5418>
As we do not support stream output buffers we only count the primitives
processed by the pipeline. Use the correct query type.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5754>
For some reason, in order to get all tests to pass, pretty much all
hardware (across vendors) has to program in offset_units * 2. This fixes
dEQP-GLES3.functional.polygon_offset.float32_displacement_with_units.
While we're at it, add polygon offset clamp support.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5763>
For turnip, we use the "bindless" model on a6xx. Loads and stores with
the bindless model require a bindless base, which is an immediate field
in the instruction that selects between 5 different 64-bit "bindless
base registers", a 32-bit descriptor index that's added to the base, and
the usual 32-bit offset. The bindless base usually, but not always,
corresponds to the Vulkan descriptor set. We can handle the case where
the base is non-constant by using a bunch of if-statements, to make it a
little easier in core NIR, and this seems to be what Qualcomm's driver
does too. Therefore, the pointer format we need to use in NIR has a vec2
index, for the bindless base and descriptor index. Plumb this format
through core NIR.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5683>
Add the possibility to specify the source components. This is necessary
to let the UBO/SSBO index have more than one component, and it also lets
us remove a few hand-rolled load intrinsic definitions.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5683>
