This normalizes the printed format. It also makes it easier for the
future when we may introduce semantic _warn and _error handlers.
A tripped zero is essentially a hazard to check for.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
If this bit is clear, MFBD preload will be enabled, and you.. don't want
that. (At least, when the bit is clear, the old contents of the
framebuffer will be preserved. I'm assuming this is what "MFBD preload"
refers to in kbase.)
Validate that this bit is always set.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
There is no "chunknown" structure; that part of the union is an artefact
from falsely believing vertex/tiler MFBDs could have render targets
attached (they can't). These are just plain old AFBC fields, and if
there is no AFBC, it's error to set these field.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
For our purposes of driver debugging, the contents of uniform buffers
are rarely interesting; we're more concerned about the metadata setting
them up.
We do need to be careful to validate the sizes of both uniforms and
uniform buffers.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Many structures in the command stream have a GPU address and size
determined statically. We should check that the pointers we are passed
are valid and the buffers they point to are big enough for the given
size. If they're not, an MMU fault would be raised.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Verify sizes / masks / etc against something logical to cull down the
trace space and automatically guard against a number of potential
hazards.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
While the algorithm for computing the header size has been correct for a
while, we used a major hack to conservatively guess the body size. Let's
scrap that and figure out the algorithm we actually need to use to be
bit-identical with what the hardware expects.
We do have to be careful to add the header size to total comptued BO
size.
It's not clear how big the polygon list needs to be in practice -- but
it has to be somewhat bigger than the polygon list itself. This needs
more investigation. If we size the polygon list exactly based on the
polygon_list_size field, we get faults like:
[ 1224.219886] panfrost ff9a0000.gpu: Unhandled Page fault in AS0 at VA 0x000000001BDE8000
Reason: TODO
raw fault status: 0x660003C3
decoded fault status: SLAVE FAULT
exception type 0xC3: TRANSLATION_FAULT_LEVEL3
access type 0x3: WRITE
source id 0x6600
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The other commented lines just add noise/entropy we don't want, and can
in fact crash the trace due to asserts failing.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The polygon sizes are computed from the width/height/flags, so we can
reverse the computation and use our computation to verify the two
computation algorithms are bit-identical. If they are, we can omit the
computed fields.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We have the BOs available; ensure that the bounds specified in the
command stream are actually the correct bounds.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This allows us to catch a class of errors (for negative offsets, etc)
automatically.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The on-the-wire representation of workgroups is not 1:1 to the decoded
Gallium-level workgroups (there are multiple valid encodings; see the
previous commit). Nevertheless, since we're now bit-identical in packing
vs the blob, we can check for a canonical form and only print the
verbose trace if we fail the canonical form.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
It's obvious that it's linked by virtue of us printing the struct it
links against. No need to repeat ourselves.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We don't have a good way to confirm this, but it parallels the kernel
definitons for MMU faults nicely.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This was supposed to read heap_start. It's the same value but still,
better get this right.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We wire through some shader-db-style stats on the current shader in the
disassemble so we can get a quick estimate of shader complexity from a
trace.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Suggested-by: Rob Clark <robdclark@chromium.org>
Midgard does not accept a index_bias directly and relies instead on a
bias correction offset (offset_bias_correction) in order to calculate
the unbiased vertex index.
We need to make sure we adjust offset_start and vertex_count in order to
take into account the index_bias as required by a
glDrawElementsBaseVertex call and then supply a additional
offset_bias_correction to the hardware.
Signed-off-by: Rohan Garg <rohan.garg@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This allows us to decode asymmetric varyings correctly, which occurs
with e.g. gl_FrontFacing.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Corresponds to the normalized coordinates? flag on images in OpenCL and
evidently also shows up in GL, so let's wire it in.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
It's just a bit field containing some flags; there's no need for all the
macro magic.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Images are implemented (in part) as special attributes, so include
support for decoding this.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Memory corruption (for both legitimate and illegitimate reasons) causes
this to hang pantrace.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
If tiler_heap_end == tiler_heap_start, ensure it's printed the same
rather than one erroring out as hex.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
It is legal to load a shader from a NULL address, particularly when the
TILER job is used strictly for effects on the Z/S buffer with 0x0 color
mask. Don't crash the decoder in this case.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
When debugging, we're given the fault_pointer unresolved, so it is
helpful to have more context in the decode.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Midgard supports two modes of operation, 32-bit mode and 64-bit mode.
The GPU is natively 64-bit, but job descriptors can be submitted in
32-bit mode. Among other changes, 32-bit mode shortens pointer sizes to
use 32-bit pointers rather than the full 64-bit range.
The blob decides which mode to use based on the CPU bitness, so an armhf
system uses 32-bit descriptors and an aarch64 system uses 64-bit
descriptors. For a while, we mimicked this, bu inevitably this caused
the 32-bit support to lag behind as our reference platform is 64-bit.
To combat the code staleness, we traced an older GPU paired with a 64-bit
CPU (the Midgard T720 on-board the sunxi H64). From there, we could tell
which fields were really about hardware and which fields were simply
reflections of the descriptor bitness.
From there, we decided to remove support for 32-bit descriptors
entirely, using 64-bit descriptors unconditionally. There is minimal
performance penalty for this in practice, and it allows us to unify
these disparate code paths. This fixes:
- T860 + armhf
- T820 + armhf
- T760 + aarch64
And will help bringup of 1st/2nd generation Midgard regardless of CPU.
[Work done by Tomeu. Commit message written by Alyssa.]
v2: Add comments preserving information about the old behaviour for
future reference. Fix a compiler warning. (Alyssa)
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
We don't even support replay anymore; this is just wasting characters
and adding clutter.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This allows dumping memory properties directly without dereferencing an
address, allowing us to fix more -Waddress-of-packed-member warnings.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
I'm not sure why I thoughtt here was an off-by-one, other than maybe bad
data collection.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In preparation for a Panfrost-based non-Gallium driver (maybe
Vulkan...?), hoist everything except for the Gallium driver into a
shared src/panfrost. Practically, that means the compilers, the headers,
and pandecode.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
