and svga_set_sampler_views(). If there's no change, return early
and don't set a SVGA_NEW_x dirty state flag.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
It allows to call nouveau_vp3_bsp_next multiple times
between one begin/end.
It is required to support st/va.
https://bugs.freedesktop.org/show_bug.cgi?id=89969
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
[imirkin: create strparm_bsp function, simplified w0 calculation]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
The counter was not set but used by the nouveau driver.
It is required otherwise visual output is garbage.
Signed-off-by: Julien Isorce <j.isorce@samsung.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Experimentally, 4M causes corruption and slowness, try to ramp it up
with size instead.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
H264 doesn't have a bitplane bo. We just need a device reference, so use
the one from the client.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
It's the same behavior that we use for later LLVM.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Found during NIR_TEST_CLONE=1 piglit run. We were using block->index
but forgetting to require it. Causing things to not work with a cloned
shader which didn't preserve block_index.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Immediately convert into NIR and do an initial key-agnostic lowering/
optimization pass. This should let us share most of the per-variant
transformations between each variant, and hopefully minimize the draw-
time variant creation part of the compilation process.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
It will still hit a compile_assert() in emit_tex, which has the
advantage of dumping out the offending shader.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Nested functions are supported as an extension in GNU C, but Clang
don't support them.
This fixes compilation errors when (manually) building compute.c,
or by setting --enable-gallium-tests to the configure script.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75165
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Instead of iterating over all the buffer resources looking for coherent
buffers, we keep track of a context-wide count. This will save some
iterations (and CPU cycles) in 99.99% case because usually coherent
buffers are not so used.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Diagnostics sent during code generation and the every error message reported
by LLVMTargetMachineEmitToMemoryBuffer are disjoint reporting mechanisms. We
take care of both and also send an explicit message indicating failure at the
end, so that log parsers can more easily tell the boundary between shader
compiles.
Removed an fprintf that could never be triggered.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will allow us to send shader debug info via the context's debug callback.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The output via stderr is very helpful for ad-hoc debugging tasks, so that remains
unchanged, but having the information available via debug messages as well
will allow the use of parallel shader-db runs.
Shader stats are always provided (if the context is a debug context, that is),
but you still have to enable the appropriate R600_DEBUG flags to get
disassembly (since it is rather spammy and is only generated by LLVM when we
explicitly ask for it).
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This will allow us to send shader debug info.
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The fixed alignment of u_upload_mgr will go away.
This is the first step.
The motivation is that one u_upload_mgr can have multiple users,
each allocating from the same buffer, but requiring a different alignment.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
The function only aligned the size, but not the offset.
The offset was aligned only when the previous suballocation was aligned.
That yielded the correct offset alignment if the alignment was constant
for all suballocations.
Instead, directly align the offset, but allow an unaligned size.
There is no change in behavior, because the alignment is constant
at the moment.
This a prerequisite for allowing a variable alignment for suballocations.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
First off, we can't flush in the middle of a command. Secondly
requesting the extra push space might cause a flush to happen. If that
flush happens, we'd have to do the PUSH_REFN again. So instead do
PUSH_REFN after the push space request. This helps avoid rare crashes
with supertuxkart in libdrm due to assertion failures.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Quads need to respect winding order, too - not just triangles.
Fixes rendering in GFXBench 4.0's tessellation benchmark.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
This will allow the state tracker to inform the driver where in a
broken-up multidraw we currently are. This can then be passed into the
vertex shader.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This allows the state tracker to know that the various draw parameters
are available in vertex shaders.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The add might actually have a 0 as an argument, which would convert it
into a mov. Make sure to detect that. Also avoid the hack of putting the
immediate directly into the instruction, instead use a mov to put it
into place and let the later LoadPropagation pass place it if possible.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
A hugely common case when using nir_builder is to have a shader with a
single function called main. This adds a helper that gives you just that.
This commit also makes us use it in the NIR control-flow unit tests as well
as tgsi_to_nir and prog_to_nir.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Make sure to make conversion unsigned when we're ANDing the high bits
away. Fixes corruption in dolphin.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
This option allows replacing a single shader by a pre-compiled ELF object
as generated by LLVM's llc, for example. This can be useful for debugging a
deterministically occuring error in shaders (and has in fact helped find
the causes of https://bugs.freedesktop.org/show_bug.cgi?id=93264).
v2: drop the debug flag, use DEBUG_GET_ONCE_OPTION instead
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This changes the count slightly (because of si_generate_gs_copy_shader), but
this is only relevant for the driver-specific num-compilations query. It sets
the stage for the next commit.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
When buffer size is less than 16, zero ends up being programmed as
size, which prevents the hardware from fetching the correct values.
Fix it by combining shift and align so that the value is always
rounded up.
Cc: "11.1 11.0 10.6" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92229
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
