The way we handle spilling for fp64 in vec4 is to emit a series of MOVs
which swizzles the data around and then a pair of 32-bit spills. This
works great except that the next time we go to pick a spill reg, the
compiler isn't smart enough to figure out that the register has already
been spilled. Normally we do this by looking at the sources of spill
instructions (or destinations of fills) but, because it's separated from
the actual value by a MOV, we can't see it. This commit adds a new
opcode VEC4_OPCODE_MOV_FOR_SCRATCH which is identical to MOV in
semantics except that it lets RA know not to spill again.
Fixes: 82c69426a5 "i965/vec4: support basic spilling of 64-bit registers"
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10571>
One exception is src/amd/addrlib/, for which -Wimplicit-fallthrough is
explicitly disabled.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10220>
v2: Instead of fixing unitialized member 'fs_visitor::input_vue_map'
(as reported by Coverity Scan in defect CID 1474559),
remove unused members 'vec4_tcs_visitor::input_vue_map' and
'fs_visitor::input_vue_map'.
Also fixed 'debug_enabled' argument skipped in a fs_visitor constructor
call from brw_compile_tes().
Signed-off-by: Yevhenii Kharchenko <yevhenii.kharchenko@globallogic.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10040>
The callers already have this value, and we would like to make it
follow different rules other than stage that might not be visible to
the helper function, so just pass explicitly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
The callers already have this value, and we would like to make it
follow different rules other than stage that might not be visible to
the helper function, so just pass explicitly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
The callers already have this value, and we would like to make it
follow different rules other than stage that might not be visible to
the helper function, so just pass explicitly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
Make the check once in a variable, that can be reused for other parts.
Also add `unlikely` to the various conditionals depending on it
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
The messages for those 16-bit operations still use 32-bit sources and
destinations, so expand them accordingly when building the payload.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8750>
Previously can_do_source_mods was used to determine whether a value with
a source modifier or a value from a scalar source (e.g., a uniform)
could be copy propagated. The former is a superset of the latter, so
this always produces correct results, but it is overly restrictive. For
example, a BFI instruction can't have source modifiers, but it can have
scalar sources.
This was originally authored to prevent a small number of shader-db
regressions in a commit that marked SHR has not being able to have
source modifiers. That commit has since been dropped in favor of a
different method.
v2: Refactor register region restriction detection to a helper function.
Suggested by Jason.
No fossil-db changes on any Intel platform.
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs: 20039111 -> 20038943 (<.01%)
instructions in affected programs: 31736 -> 31568 (-0.53%)
helped: 104
HURT: 0
helped stats (abs) min: 1 max: 9 x̄: 1.62 x̃: 1
helped stats (rel) min: 0.30% max: 0.88% x̄: 0.45% x̃: 0.42%
95% mean confidence interval for instructions value: -2.03 -1.20
95% mean confidence interval for instructions %-change: -0.47% -0.42%
Instructions are helped.
total cycles in shared programs: 980309750 -> 980308897 (<.01%)
cycles in affected programs: 591078 -> 590225 (-0.14%)
helped: 70
HURT: 26
helped stats (abs) min: 2 max: 622 x̄: 23.94 x̃: 4
helped stats (rel) min: <.01% max: 2.85% x̄: 0.33% x̃: 0.12%
HURT stats (abs) min: 2 max: 520 x̄: 31.65 x̃: 6
HURT stats (rel) min: 0.02% max: 2.45% x̄: 0.34% x̃: 0.15%
95% mean confidence interval for cycles value: -26.41 8.64
95% mean confidence interval for cycles %-change: -0.27% -0.03%
Inconclusive result (value mean confidence interval includes 0).
No shader-db changes on earlier Intel platforms.
Reviewed-by: Anuj Phogat anuj.phogat@gmail.com [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9237>
On Gen7, we have to split shuffles into two MOVs for 64-bit types so we
can't handle source modifiers. On Gen12.5, we have to use integer types
all the time so we can't use them there either. Fixing that will be a
different commit but it interacts with this one.
Fixes: 90c9f29518 "i965/fs: Add support for nir_intrinsic_shuffle"
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9068>
We're about to start using it to implement nir_jump_halt which has
nothing inherently to do with fragment shaders or discards. May as well
name it for the HW instruction it generates.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5071>
The Intel bindless thread dispatch model is very simple. When a compute
shader is to be used for bindless dispatch, it can request a set of
stack IDs. These are allocated per-dual-subslice by the hardware and
recycled automatically when the stack ID is returned. Passed to the
bindless dispatch are a global argument address, a stack ID, and an
address of the BINDLESS_SHADER_RECORD to invoke. When the bindless
shader is dispatched, it is passed its stack ID as well as the global
and local argument pointers. The local argument pointer is the address
of the BINDLESS_SHADER_RECORD plus some offset which is specified as
part of the BINDLESS_SHADER_RECORD.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
I checked the Bspec for both Gen11 and Gen12, and it appears that rotate
instructions cannot have source modifiers or saturate modifer. Saturate
was already handled.
Fixes: 1e92e83856 ("intel/compiler: Emit ROR and ROL instruction")
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7650>
Motivation is to detect earlier certain bugs that can occur when
missing a check for the stage before using the downcast.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7540>
This opcode is responsible for setting up the buffer base address and
per-thread scratch space fields of a scratch message header. For the
most part, it's a copy of g0 but some messages need us to zero out g0.2
and the bottom bits of g0.5.
This may actually fix a bug when nir_load/store_scratch is used. The
docs say that the DWORD scattered messages respect the per-thread
scratch size specified in gN.3[3:0] in the message header but we've been
leaving it zero. This may mean that we've been ignoring any scratch
reads/writes from a load/store_scratch intrinsic above the 1KB mark.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7084>
It's included in declaration of INTEL_DEBUG.
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6732>
These should be more accurate than the current cycle counts, since
among other things they consider the effect of post-scheduling passes
like the software scoreboard on TGL. In addition it will enable us to
clean up some of the now redundant cycle-count estimation
functionality in the instruction scheduler.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Change brw_compute_vue_map() to also take the number of pos slots. If
more than one slot is used, the VARYING_SLOT_POS is treated as an
array.
When using Primitive Replication, instead of a single position, the
VUE must contain an array of positions. Padding might be
necessary (after clip distance) to ensure rest of attributes start
aligned.
v2: Add note about array in the commit message and assert that
pos_slots >= 1 to make clear 0 is invalid. (Jason)
Move padding to be after the clip distance.
v3: Apply the correct offset when gathering the sources from outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Passing shader_stats to the fs_generator constructor means that the
SIMD8 shader stats from the visitor (such as the scheduler mode) will be
reported out for the SIMD16/SIMD32 versions as well.
As you can see, we are now passing 'shader_stats' and 'stats' to
generate_code(), which is obviously odd looking. Ian rebased and
committed an old patch of mine which added the shader_stats struct on
July 30 in commit dabb5d4bee (i965/fs: Add a shader_stats struct.) and
shortly after on August 12 Jason added the brw_compile_stats struct in
commit 134607760a (intel/compiler: Fill a compiler statistics struct).
I'd like to combine the two, but I'm not sure how. shader_stats is an
input to generate_code() while brw_compile_stats is an output and is
only used by the Vulkan driver. Leave it as is for now...
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4093>
This only does half of the work. The actual representation of the
idom tree is left untouched, but the computation algorithm is moved
into a separate analysis result class wrapped in a BRW_ANALYSIS
object, along with the intersect() and dump_domtree() auxiliary
functions in order to keep things tidy.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
The invalidate_analysis() method knows what analysis passes there are
in the back-end and calls their invalidate() method to report changes
in the IR. For the moment it just calls invalidate_live_intervals()
(which will eventually be fully replaced by this function) if anything
changed.
This makes all optimization passes invalidate DEPENDENCY_EVERYTHING,
which is clearly far from ideal -- The dependency classes passed to
invalidate_analysis() will be refined in a future commit.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
Like a SHADER_OPCODE_MEMORY_FENCE but doesn't doesn't generate any
assembly code.
Will be used when the compiler shouldn't reorder certain instructions
but there's no need to generate code for the HW to do it -- as the
ordering will be guaranteed by other means.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>
Having the IR opcodes locked to their hardware representation is risky
because it causes opcodes as different as BRC and IFF to compare equal
at the IR level (luckily the back-end only ever uses one opcode from
each group, right now), and it prevents us from supporting
instructions that change their hardware representation across
generations, which will become a problem on Gen12+ platforms.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
