Samplers take up zero slots and therefore don't exist in the params
array, nor are they included in stage_prog_data->nr_params. There's no
need to store their size in param_size, as it's only used for dealing
with arrays of "real" uniforms (ones uploaded as shader constants).
We run into all kinds of problems trying to refer to the uniform storage
for variables that don't have uniform storage. For one, we may use some
other variable's index, or access out of bounds in arrays. In the FS
backend, our extra 2 * MaxSamplerImageUnits params for texture rectangle
rescaling paper over a lot of problems. In the VS backend, we claim
samplers take up a slot, which also papers over problems.
Instead, just skip allocating storage for variables that don't have any.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
We always uploaded them together, mostly out of laziness - both required
an additional vertex element. However, gl_VertexID now also requires an
additional vertex buffer for storing gl_BaseVertex; for non-indirect
draws this also means uploading (a small amount of) data. This is extra
overhead we don't need if the shader only uses gl_InstanceID.
In particular, our clear shaders currently use gl_InstanceID for doing
layered clears, but don't need gl_VertexID.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
In the non-indirect draw case, we call intel_upload_data to upload
gl_BaseVertex. It makes brw->draw.draw_params_bo point to the upload
buffer, and increments the upload BO reference count.
So, we need to unreference it when making brw->draw.draw_params_bo point
at something else, or else we'll retain a reference to stale upload
buffers and hold on to them forever.
This also means that the indirect case should increment the reference
count on the indirect draw buffer when making brw->draw.draw_params_bo
point at it. That way, both paths increment the reference count, so
we can safely unreference it every time.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Ian Romanick <ian.d.romanick@intel.com>
4f338c9b introduced logic to trigger a flush rather than overflowing
cmdstream buffer. But the threshold was too low, triggering flushes
where they were not needed. This caused problems with games like
xonotic.
Part of the problem is that we need to mark all state dirty between
cmdstream submit ioctls, because we cannot rely on state being
preserved across ioctls. But even with that, there are still some
problems that are still being debugged. For now:
1) correctly mark all state dirty
2) introduce FD_MESA_DEBUG flush flag to force rendering to be flushed
between each draw, to trigger problems (so that I can debug)
3) use a more reasonable threshold so for normal usecases we don't
trigger the problems
This at least corrects the regression, but there is still more debugging
to do.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We need the .w component to end up in .x, since the hw appears to fetch
gl_FragColor starting with the .x coordinate regardless of MRT format.
As long as we are doing this, we might as well throw out the remaining
unneeded components.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Because of render-to-alpha (000x) shenanigans, freedreno needs to do
some special handling when rendering to alpha-only formats. And I
noticed that while we had _is_luminance(), _is_intensity(), etc, an
_is_alpha() helper was missing. So fix that.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Unreference the ctx->_Shader object before we delete all the pipeline
objects in the hash table. Before, ctx->_Shader could point to freed
memory when _mesa_reference_pipeline_object(ctx, &ctx->_Shader, NULL)
was called.
Fixes crash when exiting the piglit rendezvous_by_location test on
Windows.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
q_total should never go below 0 (which is why it's defined as unsigned),
and if it does, then something is seriously wrong.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As noted in the previous commit, this was introduced in
567e2769b8 ("ra: make the p, q test more
efficient"), but I forgot to mention it.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In commit 567e2769b8 ("ra: make the p, q
test more efficient") I unknowingly introduced a new requirement to the
register allocator API: the user must set the register class of all
nodes before setting up their interferences, because
ra_add_conflict_list() now uses the classes of the two interfering
nodes. i965 already did this, but r300g was setting up register classes
interleaved with setting up the interference graph. This led to us
calculating the wrong q total, and in certain cases
e78a01d5e6 (" ra: optimistically color
only one node at a time") made it so that this bug caused a segfault. In
particular, the error occurred if the q total was decremented to 1 below
0 for the last node to be pushed onto the stack. Since q_total is an
unsigned integer, it overflowed to 0xffffffff, which is what
lowest_q_total happens to be initialzed to. This means that we would
fail the "new_q_total < lowest_q_total" check on line 476 of
register_allocate.c, and so the node would never be pushed onto the
stack, which led to segfaults in ra_select() when we failed to ever give
it a register.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82828
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Tested-by: Pavel Ondračka <pavel.ondracka@email.cz>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Needed for assert.
Fixes build on BE archs with -Werror=implicit-function-declaration.
In file included from
../../../../../src/gallium/auxiliary/draw/draw_fs.c:30:0:
../../../../../src/gallium/auxiliary/util/u_math.h: In function
'util_memcpy_cpu_to_le32':
../../../../../src/gallium/auxiliary/util/u_math.h:810:4: error:
implicit declaration of function 'assert'
[-Werror=implicit-function-declaration]
assert(n % 4 == 0);
^
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
In buf_clear_region() and buf_copy_region(), max_cmd_size was set to 0. If
either of the functions is called and there is not enough space in the
builder, the next ilo_cp_flush() will fail silently in a release build.
Replace magic numbers by size defines in tex_clear_region()/tex_copy_region()
for consistency and readability.
Intruduce gen6_blt_bo and gen6_blt_xy_bo to describe BOs. In the extreme case
of gen6_XY_SRC_COPY_BLT(), the number of parameters goes down from 18 to 8.
This allows a sampler view to have a different texture target than the
underlying resource. This will be used to implement the type casting
between 2d arrays and cube maps as specified in ARB_texture_view.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The _Enabled property already has the relevant information.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
No idea why it was added, but the code runs fine even on videos
where it triggers.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Fixes a regression from "nouveau/vdec: small fixes to h264 handling"
New picking order for frames:
1. Vidbuf pointer matches.
2. Take the first kicked ref.
3. If that fails, take a ref that has a different last_used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Reorder some fields to make I-frame decoding work correctly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
The BSP bo might be too small to contain all of the bsp data,
bump its size on overflow. Also bump inter_bo when this happens,
it might be too small otherwise.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
If the source is not a GRF, it could have a register >= virtual_grf_count.
Accessing virtual_grf_end with such a register would lead to
out-of-bounds access. Make sure the source is a GRF before accessing
virtual_grf_end.
Fixes Valgrind complaints while compiling some shaders.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: mesa-stable@lists.freedesktop.org
If the glx/wgl state tracker requested a core profile but the gallium
driver did not support some feature of GL 3.1 or later, we were setting
ctx->Version=0 and then failing the assertion in
_mesa_initialize_exec_table().
With this change we check for ctx->Version=0 and tear down the context
and return NULL from st_create_context().
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
So far we have been using CL_INVOCATION_COUNT to resolve this query but this
is no good with streams, as only stream 0 reaches the clipping stage.
From ARB_transform_feedback3:
"When a generated primitive query for a vertex stream is active, the
primitives-generated count is incremented every time a primitive emitted to
that stream reaches the Discarding Rasterization stage (see Section 3.x)
right before rasterization. This counter is incremented whether or not
transform feedback is active."
Unfortunately, we don't have any registers that provide the number of primitives
written to a specific stream other than the ones that track the number of
primitives written to transform feedback in the SOL stage, so we can't
implement this exactly as specified.
In the past we implemented this feature by activating the SOL unit even if
transform feeback was disabled, but making it so that all buffers were
disabled and it only recorded statistics, which gave us the right semantics
(see 3178d2474a). Unfortunately, this came with
a significant performance impact and had to be reverted.
This new take does not intend to implement the exact semantics required by
the spec, but improves what we have now, since now we return the primitive
count for stream 0 in all cases. With this patch we use
GEN7_SO_PRIM_STORAGE_NEEDED to resolve GL_PRIMITIVES_GENERATED queries
for non-zero streams. This would return the number of primitives written
to transform feedback for each stream instead. Since non-zero streams are
only useful in combination with transform feedback this should not be too
bad, and the only case that I think we would not be supporting would be
the one in which we want to use both GL_PRIMITIVES_GENERATED and
GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN on the same non-zero stream to
detect buffer overflow.
This patch also fixes the following piglit test:
arb_gpu_shader5-xfb-streams-without-invocations
This test uses both GL_PRIMITIVES_GENERATED and
GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN queries on non-zero streams, but it
does never hit the overflow case, so both queries are always expected to return
the same value.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
That better matches the actual userspace use case, the
kernel will force it to VRAM if the hardware requires it.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
