Now that radeonsi support pass desc to ssbo atomic ops,
we can use ssbo atomic instead. aco does not implement
nir_buffer_atomic_add either.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23096>
Intel HW has multiple ways to access resources like UBO/SSBO/images :
- binding tables : a small ~240 heap of surfaces
- bindless surfaces : a 64Mb heap of surfaces up to Gfx12+, 4Gb on Gfx12.5+
- surfaces : a 4Gb heap on Gfx12.5+ (mostly unused at the moment,
only available through the LSC)
For samplers, we have 2 options since Gfx11+ :
- samplers indexed from the Dynamic State Heap (4Gb)
- samplers indexed from the Bindless Sampler Heap (4Gb)
Additionally our whole push constant promotion mechanism is based
around binding table indices. This is problematic if you want to also
promote to push constants things that would be accessed through the
bindless heap.
To solve this issue, we introduce a new intrinsic that will cary a
block index that is not based off the binding table index nor the
bindless table offset.
We will also use this intrinsic to identify whether the buffer/surface
index in load_ubo/load_ssbo/store_ssbo/etc... is relative to the
binding table or the bindless heap.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21645>
Some hardware has an instruction to load the address of a texel in a writeable
image, given the coordinates ("LEA_IMAGE"). This operation is defined only for
uncompressed images, but it is well-defined regardless of the underlying
twiddling. As such, it is not expected to be produced by APIs but is useful for
internal lowering when it is known that images will be uncompressed (e.g.
because image_store does not support compression on the hardware).
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23120>
To lower smooth lines conditionally in fragment shaders for RADV
because the line rasterization mode in Vulkan can be dynamic.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21587>
This commit drops legacy atomic support from core passes where we can simply
delete switch cases with no other changes. As such it's separated from the
more complex pass-specific commits for ease of review.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23036>
Currently, we have an atomic intrinsic for each combination of memory type
(global, shared, image, etc) and atomic operation (add, sub, etc). So for m
types of memory supported by the driver and n atomic opcodes, the driver has to
handle O(mn) intrinsics. This makes a total mess in every single backend I've
looked at, without fail.
It would be a lot nicer to unify the intrinsics. There are two obvious ways:
1. Make the memory type a constant index, keep different intrinsics for
different operations. The problem with this is that different memory types
imply different intrinsic signatures (number of sources, etc). As an
example, it doesn't make sense to unify global_atomic_amd with
global_atomic_2x32, as an example. The first takes 3 scalar sources, the
second takes 1 vector and 1 scalar. Also, in any single backend, there are a
lot more operations than there are memory types.
2. Make the opcode a constant index, keep different intrinsics for different
operations. This works well, with one exception: compswap and fcompswap
take an extra argument that other atomics don't, so there's an extra axis of
variation for the intrinsic signatures.
So, the solution is to have 2 intrinsics for each memory type -- for atomics
taking 1 argument and atomics taking 2 respectively. Both of these intrinsics
take an nir_atomic_op enum to describe its operation. We don't use a nir_op for
this purpose, as there are some atomics (cmpxchg, inc_wrap, etc) that don't
cleanly map to any ALU op and it would be weird to force it.
The plan is to transition to these new opcodes gradually. This series adds a
lowering pass producing these opcodes from the existing opcodes, so that
backends can opt-in to the new forms one-by-one. Then we can convert backends
separately without any cross-tree flag day. Once everything is converted, we can
convert the producers and core NIR as a flag day, but we have far fewer
producers than backends so this should be fine. Finally we can drop the old
stuff.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22914>
The pattern shows up all the time open-coded. Use the macro instead.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22967>
Contains a global wave ID of legacy GS waves.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22690>
They use same instruction. Just because when the time
nir_load_smem_buffer_amd was introduced, radeonsi didn't support
pass buffer descriptor to nir_load_ubo directly.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22523>
With independent sets, we're not able to compute immediate values for
the index at which to read anv_push_constants::dynamic_offsets to get
the offset of a dynamic buffer. This is because the pipeline layout
may not have all the descriptor set layouts when we compile the
shader.
To solve that issue, we insert a layer of indirection.
This reworks the dynamic buffer offset storage with a 2D array in
anv_cmd_pipeline_state :
dynamic_offsets[MAX_SETS][MAX_DYN_BUFFERS]
When the pipeline or the dynamic buffer offsets are updated, we
flatten that array into the
anv_push_constants::dynamic_offsets[MAX_DYN_BUFFERS] array.
For shaders compiled with independent sets, the bottom 6 bits of
element X in anv_push_constants::desc_sets[] is used to specify the
base offsets into the anv_push_constants::dynamic_offsets[] for the
set X.
The computation in the shader is now something like :
base_dyn_buffer_set_idx = anv_push_constants::desc_sets[set_idx] & 0x3f
dyn_buffer_offset = anv_push_constants::dynamic_offsets[base_dyn_buffer_set_idx + dynamic_buffer_idx]
It was suggested by Faith to use a different push constant buffer with
dynamic_offsets prepared for each stage when using independent sets
instead, but it feels easier to understand this way. And there is some
room for optimization if you are set X and that you know all the sets in
the range [0, X], then you can still avoid the indirection. Separate
push constant allocations per stage do have a CPU cost.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15637>
RADV used these to emulate firstTask for NV_mesh_shader.
They are no longer needed.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22139>
This new intrinsic maps to the MTBUF instruction format on AMD GPUs
and represents a typed buffer load in NIR.
Also add an unsigned upper bound for the new intrinsic.
Code for that ported from aco_instruction_selection_setup.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16805>
This will emulate VGT_ESGS_RING_ITEMSIZE, which does the multiplication
for us. It's beneficial to stop setting VGT_ESGS_RING_ITEMSIZE to reduce
context rolls, and also the register will be removed in the future.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21525>
It's unused and if we ever want to use it again we should make it an alu
opcode instead.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21445>
Hoping that I didn't miss any, this *should* add assertions
to all functions and passes which explicitly handle 'nir_loop'.
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13962>
Like nir_texop_fragment_mask_fetch_amd, this is used to load multi
sample image fmask data for AMD GPU.
We will lower multi sample image load and samples_identical intrinsics
to use it latter for radeonsi. RADV does not need this because it
always expand fmask images before dispatch compute shader.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18666>
Used by radeonsi for lower nir_atomic_add_gen/xfb_prim_count_amd.
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18010>
These two values are not known when compile for radeonsi.
They are relocated when link/upload time.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18832>
For a follow up optimization, we would like to track scratch loads.
This isn't possible with global load/store intrinsics. So use a couple
of special intrinsic in the pass and only lower it to global
intrinsics at the end.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Konstantin Seurer <konstantin.seurer@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16556>
For used by different counter.
Vulkan:
1. VK_QUERY_PIPELINE_STATISTIC_GEOMETRY_SHADER_PRIMITIVES_BIT,
sum generated primitives of all 4 streams when GS.
2. VK_QUERY_TYPE_PRIMITIVES_GENERATED_EXT, count generated
primitives for all 4 streams when VS/TES/GS.
3. VK_QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT, count generated
and streamout primitives for all 4 streams when VS/TES/GS.
OpenGL:
1. GL_GEOMETRY_SHADER_PRIMITIVES_EMITTED_ARB, sum generated
primitives for all 4 streams when GS.
2. GL_PRIMITIVES_GENERATED, count generated primitives for all 4
streams when VS/TES/GS.
3. GL_TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN, count streamout
primitives for all 4 streams when VS/TES/GS.
pipeline_stat_query_enabled_amd is for Vulkan 1 and OpenGL 1.
xfb_query_enabled_amd is for Vulkan 2/3 and OpenGL 2/3.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19015>
These intrinsics will be used to lower NGG attributes to memory on
GFX11.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19173>
For radeonsi which load this from arg.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19166>
This will be used to load the number of rasterization samples when a
fragment shader is compiled inside a library without the MSAA state.
RADV needs to know the number of samples for loading sample positions
with interpolateAtSample().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/18677>
