This creates a usable layout for all NPOT textures. Of course these
still have lots of limitations, but at least we can render to a
level.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
For NPOT texture layouts, we want to be able to access texture levels
other than 0 directly. Since the hw doesn't support that, We do it by
adding the offset directly.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
This happens with glsl-convolution-1, where we have 64 constants. This
doesn't make the test pass (we don't have 64 constants anyway, only
32) but this prevents it from crashing.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
This patch remove workaround related to LLVM < 3.2 bug.
Original bug has been closed as fixed in 2011.
At this moment gallium requires LLVM 3.3 (2013).
LLVM has been tested without SSE2 support in commit
ca70de9bd2 and removed after requiring
LLVM 3.3 in commit 013ff2fae1
Original LLVM bug: http://llvm.org/bugs/show_bug.cgi?id=6960
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
In commit 5e37a2a4a8, I made the pull constant code stop calling
_mesa_load_state_parameters() when there were no pull parameters.
This worked fine on Gen6+ because the push constant code also called
it if there were any push constants. However, the Gen4-5 push constant
code wasn't doing this. This patch makes it do so, like the Gen6+ code.
A better long term solution would be to make core Mesa just handle this
for us when necessary.
Fixes around 8766 Piglit tests on Ironlake, and probably Gen4 as well.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Fix one of the few cases where we can't reliable touch the destination hazard
bits. I am explicitly doing this patch individually so it is easy to backport. I
was tempted to do this patch before the previous patch which reorganized the
code, but I believe even doing that first, this is still easy to backport.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84212
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Move this to a separate function so that we can begin to add other little
caveats without making too big a mess.
NOTE: There is some desire to improve this function eventually, but we need to
fix a bug first.
v2:
Use const for the inst for the hazard check (Matt)
Invert safe logic to get rid of the double negative (Matt)
Add PRM reference for predicates (Matt)
Add note about empirical evidence for math (Matt)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The visitor emits MOVs to temporary registers for immediates, so these
never trigger. For further proof, check case ir_triop_fma.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
texture_offset was only used by some texturing operations, and offset
was only used by spill/unspill and some URB operations. These fields are
never used at the same time.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Check that the target is GL_TEXTURE_CUBE_MAP before emitting
TEXCOORDTYPE_VECTOR texture coordinates.
I'm not sure if the hardware would like CARTESIAN coordinates
with cube maps, and as I'm too lazy to find out just emit the
VECTOR coordinates for cube maps always. For other targets use
CARTESIAN or HOMOGENOUS depending on the number of texture
coordinates provided.
Fixes rendering of the "electric" background texture in chromium-bsu
main menu. We appear to be provided with three texture coordinates
there (I'm guessing due to the funky texture matrix rotation it does).
So the code would decide to use TEXCOORDTYPE_VECTOR instead of
TEXCOORDTYPE_CARTESIAN even though we're dealing with a 2D texure.
The results weren't what one might expect.
demos/cubemap still works, which hopefully indicates that this doesn't
break things.
Also tested with:
bin/glean -o -v -v -v -t +texCube --quick
bin/cubemap -auto
from piglit.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Add support for decoding the new branch control bit. I saw two things wrong with
the existing code.
1. It didn't bother trying to decode the bit.
- While we do not *intentionally* emit this bit today, I think it's interesting
to see if we somehow ended up with the bit set. It may also be useful in the
future.
2. It seemed to be the wrong bit.
- The docs are pretty poor wrt which bit this actually occupies. To me, it
/looks/ like it should be bit 28. I am not sure where Ken got 30 from. I
verified it should be 28 by looking at the simulator code.
I also added the most basic support for GOTO simply so we don't need to remember
to change the function in the future.
v2:
Move the branch_ctrl check out of the if gen >= 6 check to make it more
readable. (Matt)
ENDIF doesn't have branch_ctrl (Matt + Ken)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This reverts f4dd099171.
The src/gallium/tests/unit/translate_test.c gives the same results on
MinGW 64-bits as on Linux 64-bits. And since MinGW is often used for
development/testing due to its convenience, it's better not to have this
sort of differences relative to MSVC.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Saves a tiny bit of CPU overhead.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
No changes required in the driver itself, all handled by draw.
piglit results in a quick run:
skip->pass 7
skip->fail 2
(The new failures in the ARB_fragment_layer_viewport group are expected,
we fail the same if gs doesn't write these outputs regardless of the vs.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Mostly add a couple cases so we don't just check gs for this.
There's only one gotcha, the built-in vp transform in the llvm vs can't
handle it (this would be fixable though non-trivial due to vp index being
non-constant for the SoA outputs, but we don't use it if there's a gs
neither - the whole clip/vp transform integration there is suboptimal).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
When calling vaCreateImage() an internal copy of VAImage is maintained
since the allocation of "image" may not be guaranteed to live long enough.
Signed-off-by: Michael Varga <Michael.Varga@amd.com>
Fixes regression of WebGL Conformance test texture-size-limit [1] on
Ivybridge Mobile GT2 0x0166 with Google Chrome R38.
Regression introduced by
commit 6c04423153
Author: Kenneth Graunke <kenneth@whitecape.org>
Date: Sun Feb 2 02:58:42 2014 -0800
i965: Bump GL_MAX_CUBE_MAP_TEXTURE_SIZE to 8192.
The test regressed because the pointer offset arithmetic in
intel_miptree_map_gtt() overflows for large textures. The pointer
arithmetic is not 64-bit safe.
[1] 52f0dc240f/sdk/tests/conformance/textures/texture-size-limit.html
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78770
Fixes: Intel CHRMOS-1377
Reported-by: Lu Hua <huax.lu@intel.com>
Reviewed-by: Ian Romanic <ian.d.romanick@intel.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For 1D and 2D arrays we don't want the other coordinates being
offset and affecting where we sample. I wrote this patch 6 months
ago but lost it.
Fixes:
./bin/tex-miplevel-selection textureLodOffset 1DArray
./bin/tex-miplevel-selection textureLodOffset 2DArray
./bin/tex-miplevel-selection textureOffset 1DArray
./bin/tex-miplevel-selection textureOffset 1DArrayShadow
./bin/tex-miplevel-selection textureOffset 2DArray
./bin/tex-miplevel-selection textureOffset(bias) 1DArray
./bin/tex-miplevel-selection textureOffset(bias) 2DArray
v2: rewrite to handle more cases and be consistent with code
above.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Otherwise we seem to lose the split_gs_inputs and try and
pull from an uninitialised register.
fixes 9 texelFetch geom shader tests.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Previously, the kernel would dispatch thread 0, wait, then dispatch thread
1. By insisting that the thread contents use semaphores in the right
place, the kernel can sleep for longer by dispatching both threads at
once.
When using the stand alone compiler, if we try to link a shader with vertex
attributes it will segfault on linking as the binding hash tables are not
included in the shader program. Obviously, we cannot make the linking stage
succeed without the bound attributes but we can prevent the crash and just
let the linker spit its own error.
Reviewed-by: Brian Paul <brianp@vmware.com>
We cannot guarantee that vertex buffers have the necessary alignment for
fetching all AoS members at once (for instance 4x32bit XYZW data). We can
however guarantee that for textures. This did not cause errors for older
llvm versions but it now matters and will cause segfaults if the data
happens to not be aligned. Thus we need to set alignment manually.
(Note that we can't actually really guarantee data to be even element aligned
due to offsets in vertex buffers being bytes and OpenGL allowing this, but
it does not matter for x86 as alignment is only required for sse vectors -
not sure what happens on other archs, however.)
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=85467.
Not all drivers can set gl_Layer from VS. Add a fallback that passes the
instance id from VS to GS, and then uses the GS to set the layer.
Tested by adding
quad_buffers |= clear_buffers;
clear_buffers = 0;
to the st_Clear logic, and forcing set_vertex_shader_layered in all
cases. No piglit regressions (on piglits with 'clear' in the name).
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
DRI_PRIME setups have different issues due the lack of dma-buf fences
support in the drivers. For DRI3 DRI_PRIME, a race can appear, making
tearings visible, or worse showing older content than expected. Until
dma-buf fences are well supported (and by all drivers), an alternative
is to send the buffers to the server only when rendering has finished.
Since waiting the rendering has finished in the main thread has a
performance impact, this patch uses an additional thread to offload the
wait and the sending of the buffers to the server.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Implements vblank_mode and throttling, which allows us change default ratio
between framerate and input lag.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
