Geometry shaders in gen6 are significantly different from gen7+ so it is better
to have them implemented in a different file rather than adding gen6 branching
paths all over brw_vec4_gs_visitor.cpp.
This commit adds an initial implementation that only handles point output, which
is the simplest case.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In gen7+ we emit vertices as they come, however in gen6 geometry shaders we
have to buffer vertex data for all vertices and then emit it all in one go
at the end. To achieve this we need to generalize emit_urb_slot() to store
vertex data in general purpose registers and not only MRF registers.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Implemented by Ilia Mirkin <imirkin@alum.mit.edu>.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We had GS_OPCODE_SET_DWORD_2_IMMED but this required its source argument to be
an immediate. In gen6 we need to set dword 2 of the URB write message header
from values stored in separate register, so we need something more flexible.
This change replaces GS_OPCODE_SET_DWORD_2_IMMED with GS_OPCODE_SET_DWORD_2.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gen6 seems to require that EOT messages include the complete flag too or else
the GPU hangs. We add will this flag to the instruction when we emit the
thread end opcode.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gen6 geometry shaders need to allocate URB handles for each new vertex they
emit after the first (the URB handle for the first vertex is obtained via the
FF_SYNC message).
This opcode adds the URB allocation mechanism to regular URB writes.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This implements the FF_SYNC message required in gen6 geometry shaders to
get the initial URB handle.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The code required for gen6 and gen7+ is almost the same, so reuse it.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
See 7dfb4b2d00 for more details.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
This is needed to support user-provided geometry shaders, since the
brw_ff_gs_prog atom in gen6 only takes care of implementing transform feedback
for vertex shaders.
If there is no user-provided geometry shader the implementation falls back to
the original code.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Currently, gen6 only uses geometry shaders for transform feedback so the state
we emit is not suitable to accomodate general purpose, user-provided geometry
shaders. This patch paves the way to add these support and the needed
3DSTATE_GS packet modifications for it.
Previous code that emitted state to implement transform feedback in gen6 goes
to upload_gs_state_adhoc_tf().
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Currently, when a geometry shader can't use dual object mode we fall back to
dual instance mode, however, when invocations == 1, single dispatch mode is
more performant and equally efficient in terms of register pressure.
Single dispatch mode requires that the driver can handle interleaving of
input registers, but this is already supported (dual instance mode has
the same requirement). However, to take full advantage of single dispatch mode
to reduce register pressure we would also need the ability to store two
separate vec4 output values into vec8 registers, which would approximately
double our capacity to store temporary values, but currently the vec4 visitor
and generator classes do not support this, so at the moment register pressure
in single and dual instance modes is the same.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
It has been a bad name since we added the builder. Rename it to
ILO_DEBUG=batch to match i965, and call ilo_builder_decode() from
ilo_cp_submit_internal().
"Flush" is used for too many things already: pipe resource flush, pipe context
flush, pipe transfer region flush, and hardware pipeline flush. Rename it to
ilo_cp_submit(). As such, ILO_DEBUG=flush is renamed to ILO_DEBUG=submit.
Fredrik's implementation of ARB_vertex_attrib_binding introduced new
gl_vertex_attrib_array and gl_vertex_buffer_binding structures, and
converted Mesa's older gl_client_array to be derived state. Ultimately,
we'd like to drop gl_client_array and use those structures directly.
One hitch is that gl_client_array::_MaxElement doesn't correspond to
either structure (unlike every other field), so we'd have to figure out
where to store it. The _MaxElement computation uses values from both
structures, so it doesn't really belong in either place. We could put
it in the VAO, but we'd have to pass it around everywhere.
It turns out that it's only used when ctx->Const.CheckArrayBounds is
set, which is only set by the (rarely used) classic swrast driver.
It appears that drivers/x11 used to set it as well, which was intended
to avoid segmentation faults on out-of-bounds memory access in the X
server (probably for indirect GLX clients). However, ajax deleted that
code in 2010 (commit 1ccef926be).
The bounds checking apparently doesn't actually work, either. Non-VBO
attributes arbitrarily set _MaxElement to 2 * 1000 * 1000 * 1000.
vbo_save_draw and vbo_exec_draw remark /* ??? */ when setting it, and
the i965 code contains a comment noting that _MaxElement is often bogus.
Given that the code is complex, rarely used, and dubiously functional,
it doesn't seem worth maintaining going forward. This patch drops it.
This will probably mean the classic swrast driver may begin crashing on
out of bounds vertex buffer access in some cases, but I believe that is
allowed by OpenGL (and probably happened for non-VBO accesses anyway).
There do not appear to be any Piglit regressions, either.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Roland Scheidegger <sroland@vmware.com>
While depth test state is passed through the fragment shader as sideband,
data, the stencil test state has to be set by the fragment shader itself.
Many tests are still failing, but this gets most of hiz/ passing.
The SWZ instruction can have swizzle terms >4 (SWIZZLE_ZERO, SWIZZLE_ONE).
These swizzle terms caused a few assertions to fail.
This started happening after the commit "mesa: Actually use the Mesa IR
optimizer for ARB programs." when replaying some apitrace files.
A new piglit test (tests/asmparsertest/shaders/ARBfp1.0/swz-08.txt)
exercises this.
Cc: "10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
This allows for introducing dead code eliminating of uniforms, copy
propagation of uniforms, and instruction rescheduling between instructions
that both read uniforms.
This is particularly important for outputs, where we try to MOV the whole
vec4 to the VPM, even if only 1-3 components had been set up. It might
also be important for temporaries, if the shader reads components before
writing them.
While the result of signed integer division by zero is undefined by glsl
(and doesn't exist with d3d10), we must not crash, so need to make sure we
don't get sigfpe much like udiv already does.
Unlike udiv where we return 0xffffffff (as required by d3d10) there is
no requirement right now to return anything specific so we use zero.
sample opcodes don't have valid texture target information (and I don't think
this should be changed), however it would be nice if we had that information
ready elsewhere, so stuff that information into the tgsi info when analyzing
a shader.
v2: Ilja Mirkin spotted some bugs wrt not handling msaa resources. So add them
and while there also add them to the tex opcode analysis this was cloned from
as well (plus get rid of some bug not detecting indirect textures there in some
cases too).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
MESA_FORMAT_x8y8z8w8 puts the x channel in the least significant part of
the containing 32-bit integer, which is equivalent to PIPE_FORMAT_xyzw8888.
PIPE_FORMAT_x8y8z8w8 puts the x channel first in memory.
This patch fixes up the mesa<->gallium mapping accordingly.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
MESA_FORMAT_LnAn puts the luminance in the least significant part of
the containing integer, which is equivalent to PIPE_FORMAT_LAnn.
PIPE_FORMAT_LnAn puts the luminance first in memory.
This patch fixes up the mesa<->gallium mapping accordingly.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This means that each 8888 SRGB format has a reversed counterpart,
which is necessary for handling big-endian mesa<->gallium mappings.
v2: fix missing i965 additions. (Jason)
fix 127->255 max alpha for SRGB formats. (Jason)
v1: Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The associated UNORM format already existed.
This means that each LnAn format has a reversed counterpart,
which is necessary for handling big-endian mesa<->gallium mappings.
[airlied: rebased onto current master]
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
...i.e. formats in which the first listed component is in the least
significant byte of the integer. The corresponding UNORM aliases already exist.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This means that each RnGnBnxn format has a reversed counterpart,
which is necessary for handling big-endian mesa<->gallium mappings.
The associated UNORM and SRGB formats already exist.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
...i.e. formats in which the first listed component is in the least
significant half of the integer.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
...i.e. formats in which the alpha or green channel is first in memory.
This means that each LnAn and RnGn format has a reversed counterpart,
which is necessary for handling big-endian mesa<->gallium mappings.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Jason pointed out the bug on review adding new formats,
but the existing format also appears to have the bug, so
use 255 as the max, these are SRGB no SNORM.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Luminance is the least-significant byte of the uint16, rather than the
lowest byte in memory. Other parts of mesa already handle this correctly
for big-endian, and swrast already handles other MESA_FORMAT_x8y8 formats
correctly. This case was just an odd-one-out.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
MESA_FORMAT_R8G8B8X8_SNORM used a function called unpack_X8B8G8R8_SNORM
while MESA_FORMAT_R8G8B8X8_SRGB used a function called unpack_R8G8B8X8_SRGB.
This patch renames the SNORM function to have the same order as the
MESA_FORMAT name, like the SRGB function does.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The function was using the "X" component as the alpha channel,
rather than setting alpha to 1.0.
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was being shared using a ../../ get out of gallium into
mesa, and I swore when I did it I'd fix things when we got a util
dir, we did, so I have.
v2: move RGTC_DEBUG define
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This gets a ton of piglit working that crashes in waffle context
management stuff otherwise. Actually supporting mismatched FB sizes is at
best going to require some more load/store generals for color buffers, but
if I can't manage to do that I'll want to just have state_tracker reject
those FBOs as unsupported, rather than deny GL 2.1.
