Collapse things back into a setup_slices() which takes the desired
alignment as a param. This gets things ready for a4xx which has some
slightly different requirements.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
v2: actually do perspective divide for RECT/SHADOWRECT
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Nowadays GCC assumes stack pointer is 16-byte aligned even on 32-bits, but that is an assumption OpenGL drivers (or any dynamic library for that matter) can't afford to make as there are many closed- and open- source application binaries out there that only assume 4-byte stack alignment.
V4: fix comment and indentation
V3: move all sse4.1 build flag config to the same location
and add comment as to why we need to do the realign
V2: use $target_cpu rather than $host_cpu
and setup build flags in config rather than makefile
https://bugs.freedesktop.org/show_bug.cgi?id=86788
Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Matt Turner <mattst88@gmail.com>
CC: "10.4" <mesa-stable@lists.freedesktop.org>
For OpenGL ES 3.0 spec, the minor number for SHADING_LANGUAGE_VERSION is always
two digits, matching the OpenGL ES Shading Language Specification release
number. For example, this query might return the string "3.00".
This patch fixes the following dEQP test:
dEQP-GLES3.functional.state_query.string.shading_language_version
No piglit regression observed.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL ES 3.00 spec, chapter 4.6.1 "The Invariant Qualifier",
Only variables output from a shader can be candidates for invariance. This
includes user-defined output variables and the built-in output variables.
As only outputs can be declared as invariant, an invariant output from one
shader stage will still match an input of a subsequent stage without the
input being declared as invariant.
This patch fixes the following dEQP tests:
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_interp_storage_precision
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_interp_storage
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_storage_precision
dEQP-GLES3.functional.shaders.qualification_order.variables.valid.invariant_storage
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_interp_storage_precision_invariant_input
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_interp_storage_invariant_input
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_storage_precision_invariant_input
dEQP-GLES3.functional.shaders.qualification_order.variables.invalid.invariant_storage_invariant_input
No piglit regressions observed.
v2:
- Add spec content in the code
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The current code computes ctx->Array.LegalTypesMask just once,
however, computing this needs to consider ctx->API so we need
to make sure that the API for that context has not changed if
we intend to reuse the result.
The context API can change, at least, if we go through
_mesa_meta_begin, since that will always force
API_OPENGL_COMPAT until we call _mesa_meta_end. If any
operation in between these two calls triggers a call to
update_array_format, then we might be caching a value for
LegalTypesMask that will not be right once we have called
_mesa_meta_end and restored the context API.
Fixes the following 179 dEQP tests in i965:
dEQP-GLES3.functional.vertex_arrays.single_attribute.strides.fixed.*
dEQP-GLES3.functional.vertex_arrays.single_attribute.normalize.fixed.*
dEQP-GLES3.functional.vertex_arrays.single_attribute.output_types.fixed.*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.static_draw.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.stream_draw.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.dynamic_draw.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.static_copy.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.stream_copy.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.dynamic_copy.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.static_read.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.stream_read.*fixed*
dEQP-GLES3.functional.vertex_arrays.single_attribute.usages.dynamic_read.*fixed*
dEQP-GLES3.functional.vertex_arrays.multiple_attributes.input_types.3_*fixed2*
dEQP-GLES3.functional.draw.random.{2,18,28,68,83,106,109,156,181,191}
Reviewed-by: Brian Paul <brianp@vmware.com>
From GL ES 3.0 specification, section 6.1.15 Internal Format Queries (page 236),
multisampling is not supported for signed and unsigned integer internal formats.
Fixes 19 dEQP tests under 'dEQP-GLES3.functional.state_query.internal_format.*'.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GL_RGB and GL_RGBA are valid internal formats on a GLES3 profile. See
"Table 1. Unsized Internal Formats" at
https://www.khronos.org/opengles/sdk/docs/man3/html/glTexImage2D.xhtml.
Fixes 2 dEQP tests:
- dEQP-GLES3.functional.state_query.internal_format.rgb_samples
- dEQP-GLES3.functional.state_query.internal_format.rgba_samples
Reviewed-by: Brian Paul <brianp@vmware.com>
In OpenGL and OpenGL-ES 3+, GL_DEPTH_STENCIL_ATTACHMENT is a valid attachment point for the family of functions
that invalidate a framebuffer object (e.g, glInvalidateFramebuffer, glInvalidateSubFramebuffer, etc).
Currently, a GL_INVALID_ENUM error is emitted for this attachment point.
Fixes 21 dEQP test failures under 'dEQP-GLES3.functional.fbo.invalidate.*'.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This increases the cost of a raddr b conflict spill (save r3 to rb31, move
src1 to r3, move rb31 back to r3 when done, instead of just move src1 to
r3), but on average thanks to instruction pairing it's more worthwhile to
have another accumulator.
total instructions in shared programs: 46428 -> 46171 (-0.55%)
instructions in affected programs: 38030 -> 37773 (-0.68%)
The register allocator walks from the end of the nodes array looking for
trivially-allocatable things to put on the stack, meaning (assuming
everything is trivially colorable and gets put on the stack in a single
pass) the low node numbers get allocated first. The things allocated
first happen to get the lower-numbered registers, which is to say the fast
accumulators that can be paired more easily.
When we previously made the nodes match the temporary register numbers,
we'd end up putting the shader inputs (VS or FS) in the accumulators,
which are often long-lived values. By prioritizing the shortest-lived
values for allocation, we can get a lot more instructions that involve
accumulators, and thus fewer conflicts for raddr and WS.
total instructions in shared programs: 52870 -> 46428 (-12.18%)
instructions in affected programs: 52260 -> 45818 (-12.33%)
Since d8da6decea where the
state tracker started using UCMP on cayman a number of tests
regressed.
this seems to be r600g is doing CNDGE_INT for UCMP which is >= 0,
we should be doing CNDE_INT with reverse arguments.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reduces .text size of mesa_dri_drivers.so (i965-only) by 62k, or 1.4%.
Note that we don't remove inline from lerp_2d(), which has a comment
above it saying it definitely should be inlined. Though, removing the
inline keyword from it doesn't actually change the compiled code for me.
Reviewed-by: Brian Paul <brianp@vmware.com>
See commits 5067506e and b6109de3 for the Coccinelle script.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The docs say that we shouldn't need this workaround for gen8+, but just
removing it, causes gpu hangs. We'll revisit this, but for now, just
extend the workaround to gen9.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
SKL moves the GS threadcount to dw8 from dw7, and no longer does the
divide by 2 thing.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
This patch fixes this build error with G++ <= 4.6.
CXX test_vf_float_conversions.o
test_vf_float_conversions.cpp: In function ‘unsigned int f2u(float)’:
test_vf_float_conversions.cpp:63:20: error: expected primary-expression before ‘.’ token
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86939
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The register allocator prefers low-index registers from vc4_regs[] in the
configuration we're using, which is good because it means we prioritize
allocating the accumulators (which are faster). On the other hand, it was
causing raddr conflicts because everything beyond r0-r2 ended up in
regfile A until you got massive register pressure. By interleaving, we
end up getting more instruction pairing from getting non-conflicting
raddrs and QPU_WSes.
total instructions in shared programs: 55957 -> 52719 (-5.79%)
instructions in affected programs: 46855 -> 43617 (-6.91%)
We can avoid it by carefully ordering the packing. This is important as a
step in giving r3 to the register allocator.
total instructions in shared programs: 56087 -> 55957 (-0.23%)
instructions in affected programs: 18368 -> 18238 (-0.71%)
All uses of this require that the value be at least one, so it's
easier to report at least one than having to wrap all uses
in MAX2(max_compute_units, 1).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Harvested GPUs have some of their render backends disabled, so
in order to prevent the hardware from trying to render things
with these disabled backends we need to correctly program
the PA_SC_RASTER_CONFIG register.
v2:
- Write RASTER_CONFIG for all SEs.
v3:
- Set GRBM_GFX_INDEX.INSTANCE_BROADCAST_WRITES bit.
- Set GRBM_GFX_INFEX.SH_BROADCAST_WRITES bit when done setting
PA_SC_RASTER_CONFIG.
- Get num_se and num_sh_per_se from kernel.
v4:
- Get correct value for num_se
- Remove loop for setting PA_SC_RASTER_CONFIG
- Only compute raster config when a backend has been disabled.
v5: Michel Dänzer
- Fix computation for chips with multiple SEs
https://bugs.freedesktop.org/show_bug.cgi?id=60879
CC: "10.4 10.3" <mesa-stable@lists.freedesktop.org>
There is a bug in the current lowering pass implementation where we lower saturate
to clamp only for vertex shaders on drivers supporting SM 3.0. The correct behavior
is to actually lower to clamp only when we don't support saturate which happens
on drivers that don't support SM 3.0
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Fixes an infinite loop in swrast where the lowering pass unpacks saturate into
clamp but the opt_algebraic pass tries to do the opposite.
v3 (Ian):
This is a revert of commit cfa8c1cb "ir_to_mesa: lower ir_unop_saturate" on
the ir_to_mesa.cpp portion. prog_execute.c can handle saturates in vertex
shaders, so classic swrast shouldn't need this lowering pass.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83463
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
