Now that all drivers are using brw_cs_get_dispatch_info() we can
remove one function (which is now unused) and reduce the scope of the
other.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10504>
We have this small calculations repeated in each Intel driver, so move
them to a single place to be reused. Also includes "right_mask" since
is always used in the same context and depends on the dispatch info
values.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10504>
v2: Drop new internal opcodes (Jason)
Simplify code (Jason)
v3: Add Z computation for coarse pixels
v4: Document things a little
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
v2: Use the new inst->ex_desc field (Jason)
v3: Drop CPS LoD compensation from sampler messages (Lionel)
v4: Drop useless uses_rate_shading (Ken)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
Make INTEL_DEBUG=blorp dump the blorp shaders instead using the
general INTEL_DEBUG=fs,vs, which is now reserved to the actual FS and
VS shaders used by the pipeline.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
Makes calling code more explicit about what is being set, and allows
take advantage of zero initialization for the ones the callsite don't
care.
Besides moving to the struct, two extra "ergonomic" changes were done:
- Add a new shader_time boolean, so shader_time_index is ignored when
unused -- this allow taking advantage of the zero initialization of
unset fields.
- Since we have a struct, provide space for the error_str pointer.
Both iris and i965 were using it, and the extra rstrdup in case of
failure shouldn't be a burden for the others.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
Makes calling code more explicit about what is being set, and allows
take advantage of zero initialization for the ones the callsite don't
care.
Besides moving to the struct, two extra "ergonomic" changes were done:
- Add a new shader_time boolean, so shader_time_index is ignored when
unused -- this allow taking advantage of the zero initialization of
unset fields.
- Since we have a struct, provide space for the error_str pointer.
Both iris and i965 were using it, and the extra rstrdup in case of
failure shouldn't be a burden for the others.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9779>
The Intel bindless thread dispatch model is very simple. When a compute
shader is to be used for bindless dispatch, it can request a set of
stack IDs. These are allocated per-dual-subslice by the hardware and
recycled automatically when the stack ID is returned. Passed to the
bindless dispatch are a global argument address, a stack ID, and an
address of the BINDLESS_SHADER_RECORD to invoke. When the bindless
shader is dispatched, it is passed its stack ID as well as the global
and local argument pointers. The local argument pointer is the address
of the BINDLESS_SHADER_RECORD plus some offset which is specified as
part of the BINDLESS_SHADER_RECORD.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
Motivation is to detect earlier certain bugs that can occur when
missing a check for the stage before using the downcast.
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7540>
cs_prog_data->slm_size is basically redundant with
prog_data->total_shared, which is the field that we actually use for
controlling the shared local memory size in all drivers. We were
still using it in one place for VK_EXT_pipeline_executable_properties,
but we should just fix that and delete the field.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7152>
This will make the GL drivers pick the right SIMD variant for a given
group size set during dispatch. The heuristic implemented in
brw_cs_simd_size_for_group_size() is the same as in brw_compile_cs().
The cs_prog_data::simd_size field was removed. The generated SIMD
sizes are marked in a bitmask, which is already used via
brw_cs_simd_size_for_group_size() by the drivers.
When in variable group size, it is OK if larger SIMD shader spill,
since we'd need it for the cases where the smaller one can't hold all
the invocations.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5142>
Adding this since Iris will handle variable group size parameters by
itself.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4794>
This commit fixes performance regressions introduced by e03f965280
in which we started bounds checking our push constants. This added a
LOT of shader code to shaders which use the robustBufferAccess feature
and led to substantial spilling. The checking we just added to the FS
back-end is far more efficient for two reasons:
1. It can be done at a whole register granularity rather than per-
scalar and so we emit one SIMD8 SEL per 32B GRF rather than one
SIMD16 SEL (executed as two SELs) for each component loaded.
2. Because we do it with NoMask instructions, we can do it on whole
pushed GRFs without splatting them out to SIMD8 or SIME16 values.
This means that robust buffer access no longer explodes our register
pressure for no good reason.
As a tiny side-benefit, we're now using can use AND instead of SEL which
means no need for the flag and better scheduling.
Vulkan pipeline database results on ICL:
Instructions in all programs: 293586059 -> 238009118 (-18.9%)
SENDs in all programs: 13568515 -> 13568515 (+0.0%)
Loops in all programs: 149720 -> 149720 (+0.0%)
Cycles in all programs: 88499234498 -> 84348917496 (-4.7%)
Spills in all programs: 1229018 -> 184339 (-85.0%)
Fills in all programs: 1348397 -> 246061 (-81.8%)
This also improves the performance of a few apps:
- Shadow of the Tomb Raider: +4%
- Witcher 3: +3.5%
- UE4 Shooter demo: +2%
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4447>
At this point all drivers are doing this math on their own -- since
most of them need to cover the variable group size case, in which at
compile time the group size (and number of threads) is not defined.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Add new builtin parameters that are used to keep track of the group
size. This will be used to implement ARB_compute_variable_group_size.
The compiler will use the maximum group size supported to pick a
suitable SIMD variant. A later improvement will be to keep all SIMD
variants (like FS) so the driver can select the best one at dispatch
time.
When variable workgroup size is used, the small workgroup optimization
is disabled as it we can't prove at compile time that the barriers
won't be needed.
Extracted from original i965 patch with additional changes by
Caio Marcelo de Oliveira Filho.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
The push.total field had three values but only one was directly
used (size). Replace it with a helper function that explicitly takes
the cs_prog_data and the number of threads -- and use that in the
drivers.
This is a preparation for ARB_compute_variable_group_size where the
number of threads (hence the total size for push constants) is not
defined at compile time (not cs_prog_data->threads).
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Change brw_compute_vue_map() to also take the number of pos slots. If
more than one slot is used, the VARYING_SLOT_POS is treated as an
array.
When using Primitive Replication, instead of a single position, the
VUE must contain an array of positions. Padding might be
necessary (after clip distance) to ensure rest of attributes start
aligned.
v2: Add note about array in the commit message and assert that
pos_slots >= 1 to make clear 0 is invalid. (Jason)
Move padding to be after the clip distance.
v3: Apply the correct offset when gathering the sources from outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Store the fragment shader inputs in the program data so we can use them
later when required without needing the NIR shader.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2010>
Return the number of patches to accumulate before an 8_PATCH mode thread
is launched.
v2: (Kenneth Graunke)
- Track patch count threshold instead of input control points.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3563>
Patch adds a new arg and modifies existing calls from i965, anv
pass NULL but iris stores this information for later use.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4080>
