Some ALU instructions will likely end up being copy propagated in the
backend, which means they would not have any cost. This helps the
scheduler make better decisions for the new open-coded patterns
produced in NIR for extracts (i.e. unpack_2x16) with MR#39511.
With this (together with previous patches) we manage to produce similar
shader-db results as with the unpack_2x16 NIR extract opcodes that
MR#39511 will drop.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39687>
We need this to produce optimal code in the backend for sequences
like this:
32 %10 = ushr %5.x, %9 (0x10)
16 %14 = u2u16 %10
32 %17 = f2f32 %14
With such code, our copy propagation pass will drop the u216 and
with this patch we will be able to drop the ushr too.
This pattern can show up for VK_KHR_16bit_storage when we successfully
vectorize 16-bit loads into 32-bit loads, but will become a lot more
common after MR#39511 lands, since that would also affect things like
16-bit TMU loads, which are more common.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39687>
We only really use sub-32bit integers in conversions, so we can skip
clearing the MSB bits when we produce them by converting from larger types
(leaving these bits undefined) and only clear them when we convert from them
to larger types, since we don't have native opcodes to do these conversions
that would only access relevant bits, at least on Pi4. Also, document the
cases where we could do better for Pi5.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39687>
As rpi5 can work with either 16k or 4k pages, instead of hardcoding the
pagesize just query the kernel.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39555>
The implicit_unmap tests complete in ~18s each on my A740, so I think they
should be fine to remove from all devices' skips files -- the problem was
hitting swap in parallel.
This reshuffles some test groups, making new xfails show up. The changes
are particularly notable in virgl, where virglrenderer gets wedged at some
point, arbitrary sets of tests after that fail.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39568>
This basic assertion helps static analyzer to avoid complaining that the
data memory could be NULL when we copy data from there later.
This fixes static analyzer warning null pointer passed to 2nd parameter expecting 'nonnull'
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39577>
The generation version for V3D XML package was marked as 3.3, but
actually we removed all the code supporting this generation, and the
generations we support now are from 4.2 onwards.
So we bump up the generation version.
Fixes: 9c4829473a ("broadcom/cle: remove v33 and v41 from xml definition")
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39577>
Skip tests that are causing GPU resets to avoid issues with other tests
running simultaneously with them.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39637>
Use v3dv_job_apply_barrier_state to consume pending barriers when
executing secondary command buffers. This ensures we only serialize
against relevant stages, addressing FIXME.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39278>
Vulkan spec requires binding flags to be matched with the binding with
the same index, however currently bindings are sorted with flags not
properly sorted, which leads to bindings and flags mismatch.
Resolve this by adding optional flags info to the parameters of
vk_create_sorted_bindings(), and refactoring panvk/pvr (which really
pair bindings and flags instead of only iterating flags) to use sorted
flags.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Ryan Mckeever <ryan.mckeever@collabora.com>
Reviewed-by: Simon Perretta <simon.perretta@imgtec.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38967>
Move tfu_supports_tex_format() and
get_internal_type_bpp_for_output_format() from v3dvx_private.h
to v3dvx_format_table.h.
Move v3dv_format_plane and v3dv_format struct from v3dv_private.h
to v3dv_format_table.h.
Reviewed-by: Juan A. Suarez <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38732>
Set the per-pixel mask based on the value of skip_helpers.
This slightly increase the performance on several traces.
fps_avg helped: gl_gfxbench_trex.trace: 22.30 -> 22.79 (2.20%)
total fps_avg in all runs: 55.18 -> 55.71 (0.97%)
total fps_avg in affected (through threshold) runs: 22.30 -> 22.79 (2.20%)
helped: 1
HURT: 0
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38759>
Just changing the intrinsic for load_push_constant is wrong, as nothing
guarantees they will have the same indices in the future.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38759>
It will be used with image loads to enable or disable helper invocations.
This fixes a Vulkan CTS test that perform an imageLoad() inside a
fwidth() operation.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38759>
Set it to 500 tests, as if just only one test fails the asan, all the
tests will be marked as fail too. Keeping the size smaller, will allow
to process later to bisect searching for the tests that actually expose
the issue.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/39022>
v3d_nir_lower_load_store_bitsize that uses nir_lower_mem_access_bit_sizes
already ensures that any writemask on store has consecutive bits set.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38921>
Replace the duplicated swapchain image detection pattern across all
Vulkan drivers with the new wsi_common_is_swapchain_image() helper.
Since the swapchain handle can be extracted from VkImageCreateInfo's
pNext chain inside wsi_common_create_swapchain_image(), remove the
now-redundant VkSwapchainKHR parameter from that function.
This removes the #ifdef guards for Android/WSI platforms from each
driver, as the helper now handles this uniformly.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Yiwei Zhang <zzyiwei@chromium.org>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38541>
This is only compile tested. I have not collected any shader-db or
fossil-db data.
v2: Drop the calls to nir_opt_constant_folding. The builder in
nir_lower_flrp will already take care of this.
v3: NIR_PASS_V is gone. Noticed by Marge.
Acked-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12526>
Weird that CTS did not catch that ...
Signed-off-by: Hans-Kristian Arntzen <post@arntzen-software.no>
Fixes: 11195eb8de ("vulkan: Add KHR_swapchain_maintenance1 promotions.")
Reviewed-by: Georg Lehmann <dadschoorse@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38728>
We have nir_lower_sysvals_to_varyings() so we can just have that lower
it for the drivers who don't want a sysval. Most have to support the
sysval version anyway for various lowering so making them all have to
support both is pretty annoying.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@intel.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38562>
