glXMakeCurrent(dpy, None, NULL) would not correctly unbind the context
causing subsequent GLX requests to fail in peculiar ways
http://xquartz.macosforge.org/trac/ticket/514
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
(cherry picked from commit 5c44c1348e)
Instead of using a chain of manually maintained if/else blocks to
handle "#extension" directives, we now consult a table that specifies,
for each extension, the circumstances under which it is available, and
what flags in _mesa_glsl_parse_state need to be set in order to
activate it.
This makes it easier to add new GLSL extensions in the future, and
fixes the following bugs:
- Previously, _mesa_glsl_process_extension would sometimes set the
"_enable" and "_warn" flags for an extension before checking whether
the extension was supported by the driver; as a result, specifying
"enable" behavior for an unsupported extension would sometimes cause
front-end support for that extension to be switched on in spite of
the fact that back-end support was not available, leading to strange
failures, such as those in
https://bugs.freedesktop.org/show_bug.cgi?id=38015.
- "#extension all: warn" and "#extension all: disable" had no effect.
Notes:
- All extensions are currently marked as unavailable in geometry
shaders. This should not have any adverse effects since geometry
shaders aren't supported yet. When we return to working on geometry
shader support, we'll need to update the table for those extensions
that are available in geometry shaders.
- Previous to this commit, if a shader mentioned
ARB_shader_texture_lod, extension ARB_texture_rectangle would be
automatically turned on in order to ensure that the types
sampler2DRect and sampler2DRectShadow would be defined. This was
unnecessary, because (a) ARB_shader_texture_lod works perfectly well
without those types provided that the builtin functions that
reference them are not called, and (b) ARB_texture_rectangle is
enabled by default in non-ES contexts anyway. I eliminated this
unnecessary behavior in order to make the behavior of all extensions
consistent.
Some changes were made in glsl_parser_extras.h during cherry pick to
7.10 because 7.11 and master support many extensions that 7.10 does
not. The unsupported extensions were removed.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
These were previously 1-bit-wide bitfields. Changing them to bools
has a negligible performance impact, and allows them to be accessed by
offset as well as by direct structure access.
Some changes were made in glsl_parser_extras.h during cherry pick to
7.10 because 7.11 and master support many extensions that 7.10 does
not. The unsupported extensions were removed.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9c4445de6e)
This brings us into compliance with page 17 (page 22 of the PDF) of
the GLSL 1.20 spec:
"[Sampler types] can only be declared as function parameters or
uniform variables (see Section 4.3.5 "Uniform"). ... [Samplers]
cannot be used as out or inout function parameters."
The spec isn't explicit about whether this rule applies to
structs/arrays containing shaders, but the intent seems to be to
ensure that it can always be determined at compile time which sampler
is being used in each texture lookup. So to avoid creating a
loophole, the rule needs to apply to structs/arrays containing shaders
as well.
Fixes piglit tests spec/glsl-1.10/compiler/samplers/*.frag, and fixes
bug 38987.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38987
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit f07221056e)
The new location, as a member function of glsl_type, is more
consistent with queries like is_sampler(), is_boolean(), is_float(),
etc. Placing the function inside glsl_type also makes it available to
any code that uses glsl_types.
(cherry picked from commit ddc1c96390)
The GLSL spec says:
"If a built-in function is redeclared in a shader (i.e., a
prototype is visible) before a call to it, then the linker will
only attempt to resolve that call within the set of shaders that
are linked with it."
This patch enforces this behavior. When a function call is processed
a flag is set in the ir_call to indicate whether the previously seen
prototype is the built-in or not. At link time a call will only bind
to an instance of a function that matches the "want built-in" setting
in the ir_call.
This has the odd side effect that first call to abs() in the shader
below will call the built-in and the second will not:
float foo(float x) { return abs(x); }
float abs(float x) { return -x; }
float bar(float x) { return abs(x); }
This seems insane, but it matches what the spec says.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31744
(cherry picked from commit 66f4ac988d)
This fixes a regression introduced by commit
a26121f375 (fd.o bug #39219).
Since the __glXInitialize() call should be unnecessary anyway, this is
probably a nicer fix for the original problem too.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Signed-off-by: Henri Verbeet <hverbeet@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: padfoot@exemail.com.au
(cherry picked from commit 0f20e2e18f)
From ARB_framebuffer_object:
If a buffer is specified in <mask> and does not exist in both the
read and draw framebuffers, the corresponding bit is silently
ignored.
(cherry picked from commit 83478e5d59)
Otherwise PIPE_FORMAT_X8B8G8R8_UNORM and friends would fail.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
(cherry picked from commit 292148dc4b)
Fixes an assertion failure in the piglib out-01.frag
ARB_explicit_attrib_location test. The locations set via the layout
qualifier in fragment shader were not being applied to the shader
outputs. As a result all of these variables still had a location of
-1 set.
This may need some more work for pre-3.0 contexts. The problem is
dealing with generic outputs that lack a layout qualifier. There is
no way for the application to specify a location
(glBindFragDataLocation is not supported) or query the location
assigned by the linker (glGetFragDataLocation is not supported).
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38624
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Vinson Lee <vlee@vmware.com>
(cherry picked from commit d32d4f780f)
From the OpenGL docs for GL_ARB_explicit_attrib_location:
This extension provides a method to pre-assign attribute locations to
named vertex shader inputs and color numbers to named fragment shader
outputs.
This was accidentally implemented for fragment shader inputs. This
patch fixes it to apply to fragment shader outputs.
Fixes piglit tests
spec/ARB_explicit_attrib_location/1.{10,20}/compiler/layout-{01,03,06,07,08,09,10}.frag
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38624
(cherry picked from commit b078aad8ab)
This is based on commit 174cef7fee, but
the code is heavily changed. The original commit modifies
ir_print_visitor::unique_name, but there is no such method in 7.10.
Instead, this code just modifies ir_print_visitor::visit(ir_variable
*ir) to "do the right thing" when ir_variable::name is NULL.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38584
And don't delete them. Let ralloc clean them up. Deleting the
temporary IR leaves dangling references in the prog_instruction. That
results in a bad dereference when printing the IR with MESA_GLSL=dump.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38584
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit dbda466fc0)
The set of values initially available (before any kills) must be
tracked with each constant in the set. Otherwise the wrong component
can be selected after earlier components have been killed.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37383
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Matthias Bentrup <matthias.bentrup@googlemail.com>
(cherry picked from commit 0eb9797958)
Previously it was up to the driver or later code generator to reject
these shaders. It turns out that nobody did this.
This will need changes to support geometry shaders.
NOTE: This is a candidate for the stable branches.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37743
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit de77324d8f)
Blending and maybe even alpha-test don't work with those formats.
Only supporting RGBA, BGRA, RGBX, BGRX.
NOTE: This is a candidate for the 7.10 and 7.11 branches.
(cherry picked from commit bc517d64da)
Conflicts:
src/gallium/drivers/r300/r300_texture.c
This should fix rendering >65532 vertices using draw_arrays on r300-r400.
NOTE: This is a candidate for the 7.10 branch.
(cherry picked from commit 7df7eaf845)
Conflicts:
src/gallium/drivers/r300/r300_render.c
Tested by piglit ati_draw_buffers-arbfp.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit fb6e39737a)
Certain applications (e.g., Bernina My Label, and the Windows
implementation of Processing language) destroy the device context used when
creating the frame-buffer, causing presents to fail because we were still
referring to the old device context internally.
This change ensures we always use the same HDC passed to the ICD
entry-points when available, or our own HDC when not available (necessary
only when flushing on single buffered visuals).
We use a hidden window for pbuffer contexts, but Windows limits window
sizes to the desktop size by default. This means that creating a big
pbuffer on a small resolution single monitor would truncate the pbuffer
size to the desktop.
This change overrides the windows maximum size, allow to create windows
arbitrarily large.
When the window is minimized GetClientRect will return zeros.
Instead of creating a 1x1 framebuffer, simply preserve the current window
size, until the window is restored or maximized again.
This prevents the error
prog: for the -disable-mmx option: may only occur zero or one times!
when creating a new context after XCloseDisplay with DRI drivers linked
with a shared LLVM 2.8 library.
When GLX_INDIRECT_RENDERING is defined, some symbols are used in
libglapi.a but are not defined. Define them through the help of
glapitemp.h.
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
(cherry picked from commit 0e8d045bf8)
This was probably missed when implementing luminance and luminance alpha
render targets.
_mesa_get_format_bits checks for both GL_*_BITS and GL_TEXTURE_*_SIZE.
This fixes:
main/framebuffer.c:892: _mesa_source_buffer_exists: Assertion `....' failed.
(cherry picked from commit c0110d5450)
If the underlying transfer had a stride wider for hw alignment reasons,
the mipmap generation would generate badly strided images.
this fixes a few problems I found while testing r600g with s3tc
Signed-off-by: Dave Airlie <airlied@redhat.com>
(cherry picked from commit fdb4373a20 by Marek)
This fixes the DXT1 tests from fbo-generatemipmap-formats on some drivers.
The EXT_framebuffer_object spec (and later specs) say:
"If a buffer is specified in <mask> and does not exist in both
the read and draw framebuffers, the corresponding bit is silently
ignored."
Check for color, depth, and stencil that the source and destination
FBOs have the specified buffers. If the buffer is missing, remove the
bit from the blit request mask and continue.
Fixes the crash in piglit test 'fbo-missing-attachment-blit from', and
fixes 'fbo-missing-attachment-blit es2 from'.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37739
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
NOTE: This is a candidate for the stable branches.
(cherry picked from commit bb4758669c by Marek)
In an ES2 context (or if GL_ARB_ES2_compatibility) is supported, the
framebuffer can be complete with some attachments be missing. In this
case the _ColorDrawBuffers pointer will be NULL.
Fixes the crash in piglit test fbo-missing-attachment-clear.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=37739
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
NOTE: This is a candidate for the stable branches.
(cherry picked from commit 7f9c17aaa8 by Marek)
This is for 7.10 only. The fix in master looks too complex to be
cherry-picked.
The assertions fail when generating mipmaps for NPOT textures.
This fixes:
- fbo-generatemipmap-formats
Reviewed-by: Brian Paul <brianp@vmware.com>
