We don't initialize click methods on devices with physical buttons. This model
is a special case, it's not a clickpad but it only has one button (because one
button is all you ever need and whatnot).
https://bugs.freedesktop.org/show_bug.cgi?id=99283
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We don't init the required /sysfs files, so let's not spew a lot of warnings
during the test suite.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Usually we reply INVALID before we reply UNSUPPORTED but that's only for those
values where the value is a programming error. But in this case it's a bit
more complicated. INVALID is only for the cases where the button doesn't exist
on the device, if we don't have button scrolling at all then we have
UNSUPPORTED for all.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Set the dispatch type on creation, then check that whenever we try to get the
dispatch struct. This avoids a potential mismatch between the backends.
Plus, use of container_of means we're not dependent on the exact layout
anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
These tablets only ever give us a close event, the open event is broken. So
when we detect keyboard events, fix the kernel device's state by writing the
event to the fd.
We still sync the lid state manually, in case this fails and we don't get the
SW_LID through the normal event sequence. If it works fine, the real open
event will just be ignored.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't rely on BTN_TOUCH for "finger down", the value for that is hardcoded in
the kernel and not always suitable. Some devices need a different value to
avoid reacting to accidental touches or hovering fingers.
Implement a basic Schmitt trigger, same as we have in the synaptics driver. We
also take the default values from there but these will likely see some
updates.
A special case is when we have more fingers down than slots. Since we can't
detect the pressure on fake fingers (we only get a bit for 'is down') we
assume that *all* fingers are down with sufficient pressure. It's too much of
a niche case to have this work any other way.
This patch drops the handling of ABS_DISTANCE because it's simply not needed
anymore.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
We need to remember whether a tap was down or just hovering, otherwise we mess
up the state machine when we send tap release events for taps that never
switched to TOUCH_BEGIN. This is quick fix, really we should have a new state
here, but that's a lot harder to implement.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Extra insurance against broken lid switches. Listen to events from the
(internal) keyboard when we are logically closed. If any, assume we're open
after all and update accordingly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Not needed right now as everything assumes the listener was added before it
was removed. This helper is for the cases where we may call listener_remove
before it was ever added.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This changes the default behavior to "disable the touchpad on the first lid
close event", thus filtering any laptops where the switch state is buggy and
always in "on" state. Devices where we know the lid switch state is
reliable can be marked as such.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This is the default behavior, based on the theory of hardware actually doing
the right thing. That's not always the case, follow-up patches will change
when we do the theoretically ideal thing.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't call get_switch_event immediately, doing so for non-switch events is
documented as a bug. Check the event type instead, if that one is correct then
we can assume the rest works.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Add listener for lid switch events, disable touchpad on switch event.
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Create a lid_switch_interface to handle lid switch events, so the touchpad can
be disabled when lid is closed.
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This will allow switch devices known to libinput to be exposed. Currently,
this is SW_LID.
libinput also handles switch events internally, e.g. a laptop touchpad will
be disabled autmoatically when the lid is closed. This is transparent to
the caller, although the caller will also receive the event. See
https://bugs.freedesktop.org/show_bug.cgi?id=86223
This features is intended to be the main driver for the interface.
Co-Authored-By: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: James Ye <jye836@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Now that the acceleration code doesn't use dpi-normalized coordinates anymore,
we don't need to use them in the touchpad code. Switch to physical distances
instead, it makes debugging a lot saner.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Make sure the events we deal with are the ones we actually honor. This reduces
the chance that we accidentally process events we weren't event supposed to
get based on some earlier device decision.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
For each device open the various led devices (brightness only) and map the one
nonzero brightness to the current mode.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
./configure --enable-gcov adds the required flags to link everything ready for
gcov. A new make gcov target runs the test suite, then pulls all the gcov bits
together into ./test/gcov-reports/ including a summary file.
The script to pull everything out is used in libevdev too, we just have an
extra condition here to ignore the selftest gcov bits (it overwrites the
useful litest.c coverage output).
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When the filter code switched to raw device coordinates (bdd4264d) the input
data remained in device coordinates. Since the factor for touchpads was still
based on the physical velocity (and thus all touchpads get the same
acceleration factor for identical moves), the actual delta was dependent on
the resolution. e.g.
touchpad with 40u/mm: delta of 2/2 * accel factor 2 -> accel delta of 4/4
touchpad with 20u/mm: delta of 1/1 * accel factor 2 -> accel delta of 2/2
The normalized coordinates should be independent of the touchpad's resolution
though.
Affected by this was the standard mouse accel code and the touchpad accel
code, other filters always returned unnormalized coordinates (separate bug,
not addressed here).
This patch restores the correct behaviour for mice and touchpads
while leaving the special filters untouched. For comparision:
* 1000+dpi mice: accelerate normalized, return normalized
* touchpads: accelerate unnormalized, return normalized
* low-dpi mice: accelerate unnormalized, return unnormalized
* trackpoints: accelerate unnormalized, return unnormalized
* x230: don't touch, already does the right thing
https://bugs.freedesktop.org/show_bug.cgi?id=99383
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We were just switching type here without actual normalization, the filter code
is in device units as of bdd4264d61.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
We used to mark dell touchpads this way but let's make this more generic.
Nothing else used the dell touchpad model flag, so we can simply replace it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
