touchpad: use pressure values for touch is-down decision

Don't rely on BTN_TOUCH for "finger down", the value for that is hardcoded in
the kernel and not always suitable. Some devices need a different value to
avoid reacting to accidental touches or hovering fingers.

Implement a basic Schmitt trigger, same as we have in the synaptics driver. We
also take the default values from there but these will likely see some
updates.

A special case is when we have more fingers down than slots. Since we can't
detect the pressure on fake fingers (we only get a bit for 'is down') we
assume that *all* fingers are down with sufficient pressure. It's too much of
a niche case to have this work any other way.

This patch drops the handling of ABS_DISTANCE because it's simply not needed
anymore.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>

src/evdev-mt-touchpad.c

@@ -322,9 +322,6 @@ tp_process_absolute(struct tp_dispatch *tp,
 	case ABS_MT_SLOT:
 		tp->slot = e->value;
 		break;
-	case ABS_MT_DISTANCE:
-		t->distance = e->value;
-		break;
 	case ABS_MT_TRACKING_ID:
 		if (e->value != -1)
 			tp_new_touch(tp, t, time);
@@ -365,6 +362,11 @@ tp_process_absolute_st(struct tp_dispatch *tp,
 		t->dirty = true;
 		tp->queued |= TOUCHPAD_EVENT_MOTION;
 		break;
+	case ABS_PRESSURE:
+		t->pressure = e->value;
+		t->dirty = true;
+		tp->queued |= TOUCHPAD_EVENT_OTHERAXIS;
+		break;
 	}
 }
 
@@ -795,26 +797,72 @@ out:
 }
 
 static void
-tp_unhover_abs_distance(struct tp_dispatch *tp, uint64_t time)
+tp_unhover_pressure(struct tp_dispatch *tp, uint64_t time)
 {
 	struct tp_touch *t;
-	unsigned int i;
+	int i;
+	unsigned int nfake_touches;
+	unsigned int real_fingers_down = 0;
 
-	for (i = 0; i < tp->ntouches; i++) {
+	nfake_touches = tp_fake_finger_count(tp);
+	if (nfake_touches == FAKE_FINGER_OVERFLOW)
+		nfake_touches = 0;
+
+	for (i = 0; i < (int)tp->num_slots; i++) {
 		t = tp_get_touch(tp, i);
 
-		if (!t->dirty)
-			continue;
-
-		if (t->state == TOUCH_HOVERING) {
-			if (t->distance == 0) {
-				/* avoid jumps when landing a finger */
-				tp_motion_history_reset(t);
-				tp_begin_touch(tp, t, time);
+		if (t->dirty) {
+			if (t->state == TOUCH_HOVERING) {
+				if (t->pressure >= tp->pressure.high) {
+					/* avoid jumps when landing a finger */
+					tp_motion_history_reset(t);
+					tp_begin_touch(tp, t, time);
+				}
+			} else {
+				if (t->pressure < tp->pressure.low)
+					tp_end_touch(tp, t, time);
 			}
-		} else {
-			if (t->distance > 0)
-				tp_end_touch(tp, t, time);
+		}
+
+		if (t->state == TOUCH_BEGIN ||
+		    t->state == TOUCH_UPDATE)
+			real_fingers_down++;
+	}
+
+	if (nfake_touches <= tp->num_slots ||
+	    tp->nfingers_down == 0)
+		return;
+
+	/* if we have more fake fingers down than slots, we assume
+	 * _all_ fingers have enough pressure, even if some of the slotted
+	 * ones don't. Anything else gets insane quickly.
+	 */
+	for (i = 0; i < (int)tp->ntouches; i++) {
+		t = tp_get_touch(tp, i);
+		if (t->state == TOUCH_HOVERING) {
+			/* avoid jumps when landing a finger */
+			tp_motion_history_reset(t);
+			tp_begin_touch(tp, t, time);
+
+			if (tp->nfingers_down >= nfake_touches)
+				break;
+		}
+	}
+
+	if (tp->nfingers_down > nfake_touches ||
+	    real_fingers_down == 0) {
+		for (i = tp->ntouches - 1; i >= 0; i--) {
+			t = tp_get_touch(tp, i);
+
+			if (t->state == TOUCH_HOVERING ||
+			    t->state == TOUCH_NONE)
+				continue;
+
+			tp_end_touch(tp, t, time);
+
+			if (real_fingers_down > 0  &&
+			    tp->nfingers_down == nfake_touches)
+				break;
 		}
 	}
 }
@@ -881,8 +929,8 @@ tp_unhover_fake_touches(struct tp_dispatch *tp, uint64_t time)
 static void
 tp_unhover_touches(struct tp_dispatch *tp, uint64_t time)
 {
-	if (tp->reports_distance)
-		tp_unhover_abs_distance(tp, time);
+	if (tp->pressure.use_pressure)
+		tp_unhover_pressure(tp, time);
 	else
 		tp_unhover_fake_touches(tp, time);
 
@@ -926,6 +974,7 @@ tp_position_fake_touches(struct tp_dispatch *tp)
 			continue;
 
 		t->point = topmost->point;
+		t->pressure = topmost->pressure;
 		if (!t->dirty)
 			t->dirty = topmost->dirty;
 	}
@@ -1747,7 +1796,13 @@ tp_sync_touch(struct tp_dispatch *tp,
 				       &t->point.y))
 		t->point.y = libevdev_get_event_value(evdev, EV_ABS, ABS_Y);
 
-	libevdev_fetch_slot_value(evdev, slot, ABS_MT_DISTANCE, &t->distance);
+	if (!libevdev_fetch_slot_value(evdev,
+				       slot,
+				       ABS_MT_PRESSURE,
+				       &t->pressure))
+		t->pressure = libevdev_get_event_value(evdev,
+						       EV_ABS,
+						       ABS_PRESSURE);
 }
 
 static inline void
@@ -2271,6 +2326,38 @@ tp_init_hysteresis(struct tp_dispatch *tp)
 	return;
 }
 
+static void
+tp_init_pressure(struct tp_dispatch *tp,
+		 struct evdev_device *device)
+{
+	const struct input_absinfo *abs;
+	unsigned int range;
+	unsigned int code = ABS_PRESSURE;
+
+	if (tp->has_mt)
+		code = ABS_MT_PRESSURE;
+
+	if (!libevdev_has_event_code(device->evdev, EV_ABS, code)) {
+		tp->pressure.use_pressure = false;
+		return;
+	}
+
+	tp->pressure.use_pressure = true;
+
+	abs = libevdev_get_abs_info(device->evdev, code);
+	assert(abs);
+
+	range = abs->maximum - abs->minimum;
+
+	/* Approximately the synaptics defaults */
+	tp->pressure.high = abs->minimum + 0.12 * range;
+	tp->pressure.low = abs->minimum + 0.10 * range;
+
+	log_debug(evdev_libinput_context(device),
+		  "%s: using pressure-based touch detection\n",
+		  device->devname);
+}
+
 static int
 tp_init(struct tp_dispatch *tp,
 	struct evdev_device *device)
@@ -2288,9 +2375,7 @@ tp_init(struct tp_dispatch *tp,
 
 	evdev_device_init_abs_range_warnings(device);
 
-	tp->reports_distance = libevdev_has_event_code(device->evdev,
-						       EV_ABS,
-						       ABS_MT_DISTANCE);
+	tp_init_pressure(tp, device);
 
 	/* Set the dpi to that of the x axis, because that's what we normalize
 	   to when needed*/

src/evdev-mt-touchpad.h

@@ -153,7 +153,6 @@ struct tp_touch {
 	bool dirty;
 	struct device_coords point;
 	uint64_t millis;
-	int distance;				/* distance == 0 means touch */
 	int pressure;
 
 	bool was_down; /* if distance == 0, false for pure hovering
@@ -232,7 +231,6 @@ struct tp_dispatch {
 	unsigned int slot;			/* current slot */
 	bool has_mt;
 	bool semi_mt;
-	bool reports_distance;			/* does the device support true hovering */
 
 	/* true if we're reading events (i.e. not suspended) but we're
 	 * ignoring them */
@@ -248,6 +246,14 @@ struct tp_dispatch {
 	 */
 	unsigned int fake_touches;
 
+	/* if pressure goes above high -> touch down,
+	   if pressure then goes below low -> touch up */
+	struct {
+		bool use_pressure;
+		int high;
+		int low;
+	} pressure;
+
 	struct device_coords hysteresis_margin;
 
 	struct {

test/litest-device-alps-dualpoint.c

@@ -60,9 +60,23 @@ static struct input_event move[] = {
 	{ .type = -1, .code = -1 },
 };
 
+static int
+get_axis_default(struct litest_device *d, unsigned int evcode, int32_t *value)
+{
+	switch (evcode) {
+	case ABS_PRESSURE:
+	case ABS_MT_PRESSURE:
+		*value = 30;
+		return 0;
+	}
+	return 1;
+}
+
 static struct litest_device_interface interface = {
 	.touch_down_events = down,
 	.touch_move_events = move,
+
+	.get_axis_default = get_axis_default,
 };
 
 static struct input_id input_id = {

test/litest-device-alps-semi-mt.c

@@ -60,9 +60,23 @@ static struct input_event move[] = {
 	{ .type = -1, .code = -1 },
 };
 
+static int
+get_axis_default(struct litest_device *d, unsigned int evcode, int32_t *value)
+{
+	switch (evcode) {
+	case ABS_PRESSURE:
+	case ABS_MT_PRESSURE:
+		*value = 30;
+		return 0;
+	}
+	return 1;
+}
+
 static struct litest_device_interface interface = {
 	.touch_down_events = down,
 	.touch_move_events = move,
+
+	.get_axis_default = get_axis_default,
 };
 
 static struct input_id input_id = {

test/litest-device-atmel-hover.c

@@ -76,10 +76,24 @@ static struct input_event up[] = {
 	{ .type = -1, .code = -1 },
 };
 
+static int
+get_axis_default(struct litest_device *d, unsigned int evcode, int32_t *value)
+{
+	switch (evcode) {
+	case ABS_PRESSURE:
+	case ABS_MT_PRESSURE:
+		*value = 30;
+		return 0;
+	}
+	return 1;
+}
+
 static struct litest_device_interface interface = {
 	.touch_down_events = down,
 	.touch_move_events = move,
 	.touch_up_events = up,
+
+	.get_axis_default = get_axis_default,
 };
 
 static struct input_id input_id = {

test/litest-device-synaptics-hover.c

@@ -60,9 +60,23 @@ static struct input_event move[] = {
 	{ .type = -1, .code = -1 },
 };
 
+static int
+get_axis_default(struct litest_device *d, unsigned int evcode, int32_t *value)
+{
+	switch (evcode) {
+	case ABS_PRESSURE:
+	case ABS_MT_PRESSURE:
+		*value = 30;
+		return 0;
+	}
+	return 1;
+}
+
 static struct litest_device_interface interface = {
 	.touch_down_events = down,
 	.touch_move_events = move,
+
+	.get_axis_default = get_axis_default,
 };
 
 static struct input_id input_id = {

test/litest-device-synaptics-st.c

@@ -36,7 +36,7 @@ litest_synaptics_touchpad_setup(void)
 static struct input_event down[] = {
 	{ .type = EV_ABS, .code = ABS_X, .value = LITEST_AUTO_ASSIGN },
 	{ .type = EV_ABS, .code = ABS_Y, .value = LITEST_AUTO_ASSIGN },
-	{ .type = EV_ABS, .code = ABS_PRESSURE, .value = 30  },
+	{ .type = EV_ABS, .code = ABS_PRESSURE, .value = LITEST_AUTO_ASSIGN  },
 	{ .type = EV_ABS, .code = ABS_TOOL_WIDTH, .value = 7  },
 	{ .type = EV_SYN, .code = SYN_REPORT, .value = 0 },
 	{ .type = -1, .code = -1 },
@@ -54,10 +54,23 @@ struct input_event up[] = {
 	{ .type = -1, .code = -1 },
 };
 
+static int
+get_axis_default(struct litest_device *d, unsigned int evcode, int32_t *value)
+{
+	switch (evcode) {
+	case ABS_PRESSURE:
+		*value = 30;
+		return 0;
+	}
+	return 1;
+}
+
 static struct litest_device_interface interface = {
 	.touch_down_events = down,
 	.touch_move_events = move,
 	.touch_up_events = up,
+
+	.get_axis_default = get_axis_default,
 };
 
 static struct input_absinfo absinfo[] = {