* configure.in: Add a temporary --enable-notification-icon. This
will prolly go away.
* info-daemon/Makefile.am:
* info-daemon/NetworkManagerInfo.c:
* info-daemon/NetworkManagerInfo.h: Use a notification icon.
* panel-applet/Makefile.am:
* panel-applet/NMWirelessApplet.c: Turn into a notification icon
* panel-applet/NMWirelessApplet.h:
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@180 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Add graphics
* panel-applet/Makefile.am: Add graphics
* panel-applet/icons/*: Add graphics
* panel-applet/NMWirelessApplet.c: Use new menu times to display
the icons fully lined up.
* panel-applet/menu-info.c:
* panel-applet/menu-info.h: Add another menu type.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@163 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
Patches below from:
<j@bootlab.org>
Mark Roach <mrroach@okmaybe.com>
Thom May <thom@debian.org>
* configure.in
initscript/Debian/NetworkManager
initscript/Debian/Makefile.am
- Initscript for Debian
* src/backends/NetworkManagerDebian.c
- Add missing system init function to allow compilation
on Debian
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@125 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in: Generate config.h.
* configure.in: Dump dependency on OpenSSL; we can't
use it since this package is GPL:
http://www.gnome.org/~markmc/openssl-and-the-gpl.html
Instead, check for libgcrypt, use it if available,
otherwise use included MD5 code.
* src/gnome-keyring-md5.h, src/gnome-keyring-md5.c:
Suck in from gnome-keyring, munge a bit.
* src/Makefile.am (NetworkManager_SOURCES) <!WITH_GCRYPT>: Include
gnome-keyring-md5.h gnome-keyring-md5.c.
(NetworkManager_LDADD) <WITH_GCRYPT>: Add dep on LIBGCRYPT_LIBS.
* src/NetworkManagerWireless.c (nm_md5): New function, uses
libgcrypt or included gnome-keyring md5 bits.
(nm_wireless_128bit_key_from_passphrase): Use nm_md5.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@101 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* src/NetworkManager.c
src/backends/NetworkManagerGentoo.c
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerSystem.h
- Implement preliminary Gentoo support, adding a
nm_system_init function to the backend specification
* configure.in
- Distribution auto-detection, lowercase any user-fed
distribution names
* initscript/.cvsignore
initscript/Makefile.am
initscript/RedHat/Makefile.am
initscript/RedHat/NetworkManager
initscript/Gentoo/Makefile.am
initscript/Gentoo/NetworkManager
- Refactored initscript code separately for each
distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@64 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
src/Makefile.am
src/NetworkManagerDevice.c
src/NetworkManager.c
src/NetworkManagerUtils.[ch]
src/backends/NetworkManagerSystem.h
src/backends/NetworkManagerRedHat.c
src/backends/NetworkManagerGentoo.c
- Refactor system-specific code into separate backends for
each distribution
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@62 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* panel-applet/*
- Add panel applet
* src/NetworkManagerPolicy.c
src/NetworkManager.c
- Get access point lists from NetworkManagerInfo on-demand,
and look for ServiceCreate/ServiceDeleted signals to see when
we should query NMI for lists
* src/NetworkManagerAPList.c
- Make sure to init the list's mutex
- Convert traversals of the list over to the list iter functions
* src/NetworkManagerDbus.[ch]
- Use more aptly-named path/service/interface constants
- Treat both active and pending devices the same for "getActiveDevice"
- Add a "status" method returning "connected", "connecting", or "disconnected"
* src/NetworkManagerDevice.c
- Honor "ignored" network list when picking best ap to use
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@39 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* aclocal.m4:
Autogenerated, remove from CVS.
* autogen.sh:
Don't hardcode automake version.
* configure.in:
* info-daemon/Makefile.am:
* info-daemon/NetworkManagerInfo.c: (main):
Use GnomeProgram et al. for doing session management.
Use popt stuff for argument parsing rather than doing
it manugally.
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@38 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Remove various Makefile.in files
* TODO
- Add some more items
* configure.in
- Add checks for OpenSSL/md5 headers and libs
* src/Makefile.am
- Use OpenSSL CFLAGS
* src/NetworkManagerAP.[ch]
- Remove 'stamp' functions, replace with 'invalid' functions
to support user cancelling WEP key entry
* src/NetworkManagerDbus.c
- Remove 'stamp' return functions
- Treat returned user key as a passphrase and convert to a WEP key,
but don't actually use the WEP key yet. We use the returned user
key as a hexadecimal WEP key until we can figure out a UI for
passphrase-vs-hex key
* src/NetworkManagerWireless.[ch]
- Add passphrase-to-128bit-key function
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@28 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* configure.in
- Add checks for GConf libs & headers & flags
* info-daemon/Makefile.am
- Add GConf flags & libs to compile/link stages of NetworkManagerInfo
* info-daemon/NetworkManagerInfo.[ch]
- Don't use gquarks for data storage, just use normal data storage
- Add gconf bits to watch /system/networking/wireless/allowed_networks
* info-daemon/NetworkManagerDbus.[ch]
- Add method call for getting allowed networks
- Add method calls for getting an allowed network's essid, priority, and key
- Hook the method calls up to GConf
- Split user key dialog code into separate function (nmi_dbus_get_key_for_network)
- nmi_dbus_nmi_message_handler(): make sure to unref the reply message after sending
* src/NetworkManagerDbus.[ch]
- Switch for enumeration of networks to using essid instead
* test/Makefile.am
test/nminfotest.c
- Add test program for NetworkManagerInfo
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@19 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
- Add info-daemon directory
* configure.in
- Check for glade libs and headers
- Add info-daemon directory
* src/NetworkManagerAP.c
- nm_ap_new_from_ap(): Fix bug that resulted in an APs encryption status not getting
copied over to the new AP.
* src/NetworkManagerDbus.c
src/NetworkManagerDbus.h
- Deal with nm_device_ap_list_get_ap()->nm_device_ap_list_get_ap_by_index() change
- Remove nm_dbus_signal_need_key_for_network()
- Add disabled code for asynchronous user wep key callbacks
- Add functions for getting, setting, and cancelling user key operations
- Remove "setKeyForNetwork" device dbus method call, its on NetworkManager object instead
- Add "setKeyForNetwork" dbus method call on NetworkManager object
* src/NetworkManagerDevice.c
src/NetworkManagerDevice.h
- nm_device_update_link_active(): revert changes for wireless link detection, the WEP-key-is-wrong
logic is in device activation now
- nm_device_activate(): for wireless devices, if we can't associate with access point (perhaps
key is wrong) trigger get-user-key pending action
- Implement get-user-key pending action stuff, tie to dbus messages
- Rename nm_device_ap_list_get_ap() -> nm_device_ap_list_get_ap_by_index()
- Add nm_device_ap_list_get_ap_by_essid()
- Instead of copying "best" access points, ref them instead so that the key we set
sticks around
* src/NetworkManagerPolicy.c
- Deal with wrong WEP key, but right access point (and if so, return link_active = TRUE)
- Don't cancel pending actions on a device if its the same device as last iteration
- Only promote pending_device->active_device if activation was successfull
* src/Makefile.am
- Rename nmclienttest->nmtest
* info-daemon/Makefile.am
info-daemon/NetworkManagerInfo.c
info-daemon/NetworkManagerInfo.h
info-daemon/NetworkManagerInfoDbus.c
info-daemon/NetworkManagerInfoDbus.h
info-daemon/passphrase.glade
info-daemon/NetworkManagerInfo.conf
info-daemon/keyring.png
- Import sources for info-daemon, which pops up dialog for passphrase/key when
NetworkManager asks for it, and also will (soon) provide "allowed" access point
lists to NetworkManager by proxying user's GConf
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@16 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
* Makefile.am
Makefile.in
configure.in
dispatcher-daemon/Makefile.am
dispatcher-daemon/Makefile.in
dispatcher-daemon/NetworkManagerDispatcher.c
Add a daemon that receives signals from NetworkManager
and will (eventually) call scripts in /etc/somewhere
when devices go up or down.
* NetworkManager.c
NetworkManagerDbus.c
Spacing cleanups.
* NetworkManagerPolicy.c
- Rename nm_policy_switch_interface->nm_policy_switch_device
- nm_policy_switch_device():
Use kill (pid) instead of system ("kill <pid>")
- nm_state_modification_monitor():
Add wireless essid to output of debug statements
Correct typo in device compare to switch or not (should be !=)
Don't sleep after sending "no longer active" signal, was useless
git-svn-id: http://svn-archive.gnome.org/svn/NetworkManager/trunk@9 4912f4e0-d625-0410-9fb7-b9a5a253dbdc
