Both variables are identical thus we can fold them into AM_LDFLAGS.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
The respective HAVE_{SOFT,LLVM}PIPE are already descriptive
enough. Additionally the svga modules does not really use either
one, but the auxiliary draw & gallivm modules.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Rather than duplicating the libdeps, extra define... all over the
targets, define them only once and use when applicable.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
The dri, vdpau, omx, xvmc and gbm targets don't need any authentication
even the VL ones never used it. Either the respective loader or the
library itself (vl) is doing its auth prior to calling create_screen()
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Make sure that MEGADRIVERS is set in order to create the hardlinks.
The variable name is not the most appropriate and will be sorted
out in upcoming commits.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>
The definition of rc_pair_regalloc_inputs_only() is no longer
around so drop the declaration.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Matt Turner <mattst88@gmail.com>
There are only 32 bits in the flatshade flags (which are 1 bit per
component), the simulator crashes when you use more than about this many
varyings, and the original Broadcom code drop only exposed 8 as well.
Fixes 26 piglit tests in the varying-packing group, and makes many others
go from crash to fail (due to not checking their varying counts and
treating link failures as failures). Regresses ARB_fp/minmax (due to 8
varyings instead of 10).
This is just the GL 1.1 flat shading of colors -- we don't need to support
TGSI constant interpolation bits, because we don't do GLSL 1.30.
Fixes 7 piglit tests.
They still provide register pressure since I haven't made a special class
for them, but since they're only live for one instruction it probably
doesn't matter.
This improves the readability of QPU assembly.
The A-file unpack is just like R4 unpack, except that if you don't do a
floating-point operation it won't do float conversion (so int16 gets
scaled up to int32).
This will let me more reliably allocate a-file registers, which are going
to be even more in demand when I start using a-file unpacks.
Also fixes a bug where the reservation of payload registers (FRAG_Z/W) was
off by one but just caused failure to register allocate at all if the
off-by-one was fixed.
The r300 gallium driver is using it outside of the Mesa tree, and I wanted
to do so for vc4 as well. Rather than make the multiple-definitions
problem even more complicated, just move it to more-shared code.
v2: Don't forget to delete the symlink in r300 (review by Matt).
Delete more r300-helper references (review by Emil)
Don't prefix util/ header inclusion with "util/" (review by Emil)
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v1)
ffeb77c7b0 had a typo which turned all signed
integer divisions into unsigned ones. Oops.
This gets us back the 51 little piglits
(all from glsl built-in-functions, fs/vs/gs-op-div-int-ivec2 and similar).
Cc: "10.2 10.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Add current_pipe_control_dw1 and deferred_pipe_control_dw1 to track what have
been done since lsat 3DPRIMITIVE and what need to be done before next
3DPRIMITIVE. Based on them, we can emit WAs more smartly.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
It was used to set has_gen6_wa_pipe_control to false when the batch buffer
changed. When called from emit_flush() and others, it also unset
ILO_3D_PIPELINE_INVALIDATE_BATCH_BO so that the following emit_draw() will not
set has_gen6_wa_pipe_control to false again. It sounded error-prone and was
just ugly.
We should be able to achieve the same goal by reset has_gen6_wa_pipe_control
in ilo_3d_pipeline_invalidate(). With handle_invalid_batch_bo() gone, the
emit functions can also be inlined.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
We do not need to call it from GEN7 pipeline anymore since software
PIPE_QUERY_PRIMITIVES_EMITTED is gone.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Handles texture(samplerCubeShadow, bias), part of GLES3 and GL3
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Previously we would get a potentially computed post-swizzle coord based
on the texture target info, which would not include the bias/lod in the
last argument.
The second argument does not have to be adjacent, so adjusting the order
array did not make sense.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
This will make life a lot easier as we add support for additional
instructions.
v2: shadow reference value is always .z or .w
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The only place the enum pipe_type was used is for the TGSI sampler
view return type. So make it a TGSI type. Note: it appears this
part of TGSI isn't used by anyone so it may be removed in the future.
v2: the new name is tgsi_return_type, not tgsi_type. This means we
can drop the previously posted tgsi_type -> tgsi_opcode_type patch.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Called when the user can insert new decls, instructions.
This could be used in a few places in the 'draw' module.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
The spec says that mem objects should maintain a stack of callbacks
not just one.
v2:
- Remove stray printf.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
CC: "10.3" <mesa-stable@lists.freedesktop.org>
