Changes to vk.xml and anv_entrypoints_gen.py broke the Autotools build
on Android. The changes undef'd the VK_ANDROID_native_buffer entrypoints
in anv_entrypoints.h.
Fix it with CPPFLAGS += -DVK_USE_PLATFORM_ANDROID_KHR.
CC: <mesa-stable@lists.freedesktop.org>
See-Also: 63525ba7 "android: enable VK_ANDROID_native_buffer"
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This might fix some synchronization issues. I don't know if
that will affect performance but it's required for correctness.
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Using -vv will increase the verbosity, by printing the ppgtt mappings as
they get written into the aub file.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
If the glsl is something like this:
in vec4 some_input;
interpolateAtCentroid(some_input[idx])
then it now gets generated as if it were:
interpolateAtCentroid(some_input)[idx]
This is necessary because the index will get generated as a series of
nir_bcsel instructions so it would no longer be an input variable. It
is similar to what is done for GLSL in ca63a5ed3e.
Although I can’t find anything explicit in the Vulkan specs to say
this should be allowed, the SPIR-V spec just says “the operand
interpolant must be a pointer to the Input Storage Class”, which I
guess doesn’t rule out any type of pointer to an input.
This was found using the spec/glsl-4.40/execution/fs-interpolateAt*
Piglit tests with the ARB_gl_spirv branch.
Signed-off-by: Neil Roberts <nroberts@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
v2: update after nir_deref_instr land on master. Implemented by
Alejandro Piñeiro. Special thanks to Jason Ekstrand for guidance
at the new nir_deref_instr world.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There are a number of opcode_desc table entries for many of these
unused opcodes. A symbolic opcode enum will be required in a future
commit in order to keep them in the opcode description tables. The
alternative would be to remove the unused opcodes from the opcode
description tables.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This makes the message length available at the IR level, which should
save some guesswork in a future commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Constructing a descriptor in-place as part of the immediate of an ALU
instruction is no longer supported.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The return value is not used anymore. This allows simplifying the
code slightly, and in addition it should frustrate anybody's attempts
to continue using the obsolete piecemeal approach to construct a
message descriptor in combination with brw_send_indirect_message().
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All users of brw_send_indirect_surface_message() should be providing a
full descriptor immediate up front by now, this isn't necessary
anymore.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The current approach of returning a setup instruction where additional
descriptor fields can be specified is still supported in order to keep
things working, but it will be removed later in this series.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This replaces brw_set_message_descriptor() with the composition of
brw_set_desc() and a new inline helper function that packs the common
message descriptor controls into an integer. The goal is to represent
all message descriptors as a 32-bit integer which is written at once
into the instruction, which is more flexible (SENDS anyone?), robust
(see d2eecf0b0b fixing an issue
ultimately caused by some bits of the extended message descriptor
being left undefined) and future-proof than the current approach of
specifying the individual descriptor fields directly into the
instruction.
This approach also seems more self-documenting, since it will allow
removing calls to functions with way too many arguments like
brw_set_*_message() and brw_send_indirect_message(), and instead
provide a single descriptor argument constructed from an appropriate
combination of brw_*_desc() helpers.
Note that because brw_set_message_descriptor() was (conditionally?)
overriding fields of the instruction which strictly speaking weren't
part of the message descriptor, this involves calling
brw_inst_set_sfid() and brw_inst_set_eot() in some cases in addition
to brw_set_desc().
v2: Use SET_BITS macro instead of left shift (Ken).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Allows to specify a bitfield based on its upper and lower bounds
instead of a symbolic field definition, kind of what the current
GET_BITS macro is to GET_FIELD.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This introduces helpers that can be used to specify or extract the
whole descriptor of a SEND message instruction at once. Because the
the instruction encoding of these is rather awkward on some
generations using the generic brw_inst.h macros doesn't seem like an
option.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This allows brw_search_cache to be used to find programs without
causing extra state to be emitted in the case where the program isn't
being made active. (For example, to find the program to save out with
the ARB_get_program_binary interface.)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This might be required because some stages might generate different
programs depending on the other stages in the program. For example,
the i965 driver's tessellation control stage depends on the
tessellation evaluation shader.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We will need to populate the default key for ARB_get_program_binary to
allow us to retrieve the default gen program to store in the program
binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Trying to make sure the setup of the default program key is not
dependent on the GL state.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
For saving programs (shader cache; get program binary) it is useful to
set the id to 0, with the stage being a parameter.
For restoring programs it is useful to set the id to the id allocated
to the program at creation time.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
We will want to use these for both the disk shader cache, and for the
ARB_get_program_binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
brw_program_deserialize_driver_blob will be a more generic form of
brw_program_deserialize_nir. In addition to nir, it will also be able
to extract gen binaries and upload them to the program cache.
In this commit, it continues to only support nir.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This will allow get_program_binary to add the gen program into its
serialization in addition to just the nir program.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
The driver may prefer to have a different blob for
ARB_get_program_binary compared to the version saved out for the disk
shader cache.
Since they both use the driver_cache_blob field, we need to always
give the driver the opportunity to fill in the driver_cache_blob when
saving the program binary.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This function is called just before the gl_program::driver_cache_blob
is saved out as part of the gl_program serialization.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously the mesa core code would not call to serialize the
driver_cache_blob if it existed. We will update it to always call to
serialize the driver_cache_blob meaning we should avoid re-serializing
it under mesa/state_tracker.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Until now we have assumed that we could skip emitting these barriers
in the general case based on empirical testing and a few assumptions
detailed in a comment in the driver code, however, recent CTS tests
have showed that we actually need them to produce correct behavior.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Looks like I broke intel CI compiles.
Fixes: 6f3aee40f9 (radv: using tls to store llvm related info and speed up compiles (v10))
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Error states coming from actual Vulkan applications tend to have fairly
long command buffers and lots of chained batches. 30 total BOs isn't
nearly enough. This commit bumps it to 256, makes some things use the
actual number of sections instead of the #define, and adds asserts if we
ever go over 256 sections.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Our attempt to restart the loop with the second level batch worked at
one point but got broken at some point. It was too fragile anyway and
we're not likely to have enough secondaries to actually overflow the
stack so we may as well recurse in both cases.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The vtest protocol is pretty simple but also pretty dumb, and
the v1 caps query was fixed size, with no nice way to expand it,
however the server also ignores any command it doesn't understand.
So we can query v2 caps by sending a v2 followed by a v1, if the
v2 is ignored we know it's an old vtest server, and the we get
a v2 answer then we can just read the v1 answer and discard it.
Acked-by: Jakob Bornecrantz <jakob@collabora.com> (sounds good)
CACHE_MODE_SS is not listed in gfxspecs table for user mode
non-privileged registers. So, making any changes from Mesa
will do nothing. Kernel is already setting this bit in
CACHE_MODE_SS register which is saved/restored to/from
the HW context image.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
CACHE_MODE_SS is not listed in gfxspecs table for user mode
non-privileged registers. So, making any changes from Mesa
will do nothing. Kernel is already setting this bit in
CACHE_MODE_SS register which is saved/restored to/from
the HW context image.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
