Previously, nir_opt_dead_cf could skip dead CF nodes because overwriting
cur after dead_cf_block is not enough to cover the whole CF list.
foreach_list_typed would select the next node, skipping the node that
previously made progress:
block 1
if (true) {}
block 2
if (true) {}
block 3
if (true) {}
Would turn into:
block 1, then, block 2
if (true) { }
block 3, then
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22064>
This avoids spilling deref instructions by wrapping shader calls inside
dummy blocks, rematerializing derefs in their use blocks and removing
the dummy blocks.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22064>
`y_vu` will be used to convert NV21 to RGB.
`yv_yu` will be used to convert YVYU and VYUY to RGB when the
subsampling formats PIPE_FORMAT_R8B8_R8G8 and PIPE_FORMAT_B8R8_G8R8
are supported.
`yx_xvxu` and `xy_vxux` will be used to convert YVYU and VYUY to RGB
when those subsampling formats are not supported.
Signed-off-by: Italo Nicola <italonicola@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21219>
OpenCL 3.0 core requires __opencl_c_subgroups to be set, the OpenCL
cl_khr_subgroups extenions can only be enabled if and only if the driver
guarentees independent forward progress between subgroups.
See CL_DEVICE_SUB_GROUP_INDEPENDENT_FORWARD_PROGRESS for more information.
Signed-off-by: Karol Herbst <git@karolherbst.de>
Reviewed-by: Nora Allen <blackcatgames@protonmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22893>
Image sparse loads can be stripped from their sparse component if
unused and turned into non sparse variants.
Texture sparse accesses can also be turned off if unused.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23995>
We no longer need to call this here and can depend on the glsl_to_nir
pass to call it and clean up anything it cannot handle. Everything
else can now depend on the nir optimisation passes.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22846>
All this code does is reinitialise the values to what the original
ir_variable() call already set them too. This code is very old dating
to the initial glsl compiler support, it has probably been unrequired
for a long time now.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22846>
All this does is compilcate things such as forcing us to set
var->data.always_active_io in the glsl linker. Just let NIR clean
these up for us instead.
A Zink test hits a new assert but this is not a regression it just
uncovers an existing mesa bug.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22846>
System vars are added to the resource list as inputs so remove any
dead ones before building the list.
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22846>
These are currently removed by the GLSL IR DCE pass but we will
drop that in a following patch. Also there are scenarios where these
might not be detected as unused until the NIR optimisations have
been run so we really need to do it here too anyway.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22846>
Move all these lowering calls into the linker where they belong. This
makes future changes to the linker more flexible and is needed to
allow some following patches as we need to call things in a specific
order.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22846>
Currently, it's always initialized to 0, but we should take the value from
the grouping passed to the macro. This way parser will have the full
location info, and errors originating from it will show the correct
source file number.
Fixes: a0cfe8c4 ("glsl: Fix missing initialization of yylloc.source")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/9229
Signed-off-by: Sviatoslav Peleshko <sviatoslav.peleshko@globallogic.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23966>
You can't turn this off for llvm17+, this at least makes things
run against llvm git now instead of blowing up in clang.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/24000>
When I reading through some of my older commits I noticed that `break` in
`nir_foreach_phi` is broken because I used the two-loop trick wrong. Rewrite the
macros to fix this, and also to generally be a lot cleaner.
Fixes: 7dc297cc14 ("nir: Add nir_foreach_phi(_safe) macro")
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23957>
Makes it easier to copy snippets of shaders into code or
test comments without worrying about conflict with `/* */`.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23564>
Follow the same syntax as the intrinsic indices, since they
are conceptually similar.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23564>
- For SSA destination, padding is applied before `%`.
- For Reg destination, pad to the SSA size (to align div/con),
then remaining padding is applied before `r`.
- For instructions without destination, padding is applied so
they start right after the ` = ` of the cases above.
If the block doesn't have any destinations, there's no padding
is applied to the instructions without destinations in that
block.
For now registers with array access will be unaligned.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23564>
