Remove duplicate .alphaToOne, add missing .shaderResourceMinLod, and
reorder a few entries to match their vulkan.h order. All the sparse
features are still left out entirely.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
This matches what NVIDIA and AMD hardware expose, as well as what Intel
hardware supports.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The 1-D special case doesn't actually apply to depth or HiZ. I discovered
this while converting BLORP over to genxml and ISL. The reason is that the
1-D special case only applies to the new Sky Lake 1-D layout which is only
used for LINEAR 1-D images. For tiled 1-D images, such as depth buffers,
the old gen4 2-D layout is used and the QPitch should be in rows.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
This was already piped through in the CmdDraw(Indexed)Indirect handling.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The gen7/8_cmd_buffer logic already sets the clamp, and it's piped
through via the dynamic state.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This matches maxImageArrayLayers, as well as the same setting in the GL
frontend.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These are all regularly available in desktop GL, so the backend fully
supports them.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This appears to be fully supported already.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I asked Emil to switch from 0 (success) vs. -1 (fail) to use a boolean
in my review comments. The "not" went missing. Easy mistake, but the
result is that nothing runs at all :)
Fix whitespace while we're here too.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This updates releasing of resource in reverse order of the anv_CreateDevice
to anv_DestroyDevice.
And it fixes resource leak in pthread_mutex, pthread_cond, anv_gem_context.
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
anv_queue_init() always returns VK_SUCCESS, so caller does not need
to check return value of anv_queue_init().
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When the memfd_create() and u_vector_init() fail on anv_block_pool_init(),
this patch makes to return VK_ERROR_INITIALIZATION_FAILED.
All of initialization success on anv_block_pool_init(), it makes to return
VK_SUCCESS.
CID 1394319
v2: Fixes from Emil's review:
a) Add the return type for propagating the return value to caller.
b) Changed anv_block_pool_init() to return VK_ERROR_INITIALIZATION_FAILED
on failure of initialization.
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
brw_compiler_create() rzalloc-ates memory which we forgot to free.
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Inspired by a similar commit for radv.
Rather than recomputing the timestamp on each make invocation, just
fetch it at runtime.
Thus we no longer get the constant rebuild of anv_device.c and the
follow-up libvulkan_intel.so link, when nothing has changed.
I.e. using make && make install is a little bit faster.
v2: Use bool return type (Ken).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Port of an equivalent commit for radv.
v2: Move the call just after MMAP_VERSION (Ken).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Use the generic construct instead of the currect GCC specific one.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Fixes multiple Vulkan CTS tests that combine anisotropy and VK_FILTER_NEAREST
in dEQP-VK.texture.filtering_anisotropy.*
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Apparently the hw wedges otherwise, as mentioned in i965 comments.
Reported-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Driver should enumerate only up-to min2(num_available, num_requested)
properties and return VK_INCOMPLETE if the # of requested props is
smaller than the ones available.
Presently we assert out in such cases.
Inspired by a similar fix for RADV.
v2: Use MIN2 + typed_memcpy (Jason).
Should fix: dEQP-VK.api.info.device.extensions
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Since bind image memory started memsetting surfaces, the
device node can't be NULL, since we lookup device->info.has_llc.
Not sure why it ever was NULL before.
Fixes some things on my Ivybridge.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It turns out that the flushing required around resolves is a bit more
extensive than I first thought. You actually need render cache flush
and a CS stall both before *and* after the resolve.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Otherwise, some pipe flushes may just never happen. This is unlikely to
cause problems depending on how the kernel schedules batches, but we
shouldn't count on it.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
At vkCmdNextSubpass time, we have the actual framebuffer so we can use
regular blorp_clear for subpass clears. For fast clears, there is no
attachment version, so this will make fast clears a bit easier.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This commit adds the last remaining bits to support input attachments in
the Intel Vulkan driver. For color and depth attachments, we allocate an
input attachment surface state during vkCmdBeginRenderPass like we do for
the render target surface states. This is so that we can incorporate the
clear color and aux information as used in rendering. For stencil, we just
treat it like a regular texture because we don't there is no aux. Also,
only having to worry about at most one input attachment surface for each
attachment makes some of the vkCmdBeginRenderPass code simpler.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Input and resolve attachments can cause an implicit dependency in the
pipeline. It's our job to insert the needed flushes. Fortunately, we can
easily reuse the usage tracking that we use for CCS resolves.
This fixes 159 Vulkan CTS tests on Haswell because we're now flushing in
between drawing and MSAA resolves. I have no idea how they were passing
before on newer hardware.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
We were using VK_IMAGE_ACCESS_COLOR_ATTACHMENT_READ_BIT to detect an input
attachment read. We should use VK_IMAGE_ACCESS_INPUT_ATTACHMENT_READ_BIT
instead.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The != VK_SUCCESS case is really only capable of handling the one error.
This assert makes things a bit safer if something else goes wrong.
Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This can happen even if the binding table isn't changed. For instance, you
could have dynamic offsets with your descriptor set. This fixes the new
stress.lots-of-surface-state.cs.dynamic cricible test.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
If we try to allocate a binding table and fail, we have to get a new
binding table block, re-emit STATE_BASE_ADDRESS, and then try again. We
already handle this correctly for 3D and blorp but it never got handled for
CS. This fixes the new stress.lots-of-surface-state.cs.static crucible test.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Since both pCreateInfo->strideInBytes and pCreateInfo->extent.height
are of uint32_t type 32-bit arithmetic will be used.
Fix unintentional integer overflow by casting to uint64_t before
multifying.
CID 1394321
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Mun Gwan-gyeong <elongbug@gmail.com>
[Emil Velikov: cast only of the arguments]
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Everything is now in place, and we appear to pass the tests on Gen7+.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
