Since 8e7df519bd, we initialise all targets in
clover. This fixes bug 85380.
v2: Mention correct bug in commit message
Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4b94c3fc31)
Change max_wm_threads to match the spec on CHV. The max number of
threads in 3DSTATE_PS is always programmed to 64 and the hardware
internally scales that depending on the GT SKU. So this doesn't
change the max number of threads actually used, but it does affect
the scratch space calculation.
On CHV the old value was too small, so the amount of scratch space
allocated wasn't sufficient to satisfy the actual max number of
threads used.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 99754446ab)
Restores proper immediate tearing swap behaviour for
OpenGL bufferswap under DRI3/Present.
Cc: "10.3 10.4" <mesa-stable@lists.freedesktop.org>
v2: Add Frank Binns signed off by for his original earlier
patch from April 2014, which is identical to this one, and
Chris Wilsons reviewed tag from May 2014 for that patch, ergo
also for this one.
v3: Incorporate comment about triple buffering as suggested
by Axel Davy, and reference to relevant spec provided by
Eric Anholt.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit 455d3036fa)
The _mesa_dlist_alloc() function is only guaranteed to return a pointer
with 4-byte alignment. On 64-bit systems which don't support unaligned
loads (e.g. SPARC or MIPS) this could lead to a bus error in the VBO code.
The solution is to add a new _mesa_dlist_alloc_aligned() function which
will return a pointer to an 8-byte aligned address on 64-bit systems.
This is accomplished by inserting a 4-byte NOP instruction in the display
list when needed.
The only place this actually matters is the VBO code where we need to
allocate a 'struct vbo_save_vertex_list' which needs to be 8-byte
aligned (just as if it were malloc'd).
The gears demo and others hit this bug.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88662
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
(cherry picked from commit 53b01938ed)
When the shader does indirect addressing on the constants,
we allocate a temporary constant buffer to which we copy
the constants from the app given user constants and
the constants filled in the shader.
This patch makes this buffer be allocated once.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f8a74410f1)
Relative addressing needs the constant buffer to get all
the correct constants, even those defined by the shader.
The code to copy the shader constants to the constant buffer
was enabled only for debug build. Enable it always.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit a721987077)
Since constant indirect adressing is not allowed for ps,
we can remove our code to handle that.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 4b7a9cfddb)
relative adressing for constants is possible only for vs float
constants.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9690bf33d7)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f19e699368)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2b9f079ae3)
The fix is that this line:
"src[s] = tx->regs.vT[s];" is wrong if s doesn't start from 0.
Instead access tx->regs.vT directly when needed.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 7865210670)
Conflicts:
src/gallium/state_trackers/nine/nine_shader.c
Not filling them correctly results in bad padding and later crash.
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b1259544e3)
texcoord for ps < 1_4 should clamp between 0 and 1 the values.
texcrd (texcoord ps 1_4) does not clamp and can be used with
two modifiers _dw and _dz that means the channels are divided
by w or z.
Implement those in shared code, since the same modifiers can be used
for texld ps 1_4.
v2: replace DIV by RCP + MUL
v3: Remove an useless MOV
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5399119fb1)
Conflicts:
src/gallium/state_trackers/nine/nine_shader.c
This is wine (and windows) behaviour.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 018407b5d8)
Previous implementation didn't work well with nested loops.
Instead of using several address registers, put a0 and aL
into normal registers, and copy them to one address register when
we need to use them.
Wine tests loop_index_test() and nested_loop_test() now pass correctly.
Fixes r600g crash while loading Bioshock -
bug https://bugs.freedesktop.org/show_bug.cgi?id=85696
Tested-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 6a8e5e48be)
We should take the absolute value of the input.
Also return -FLT_MAX instead of -Inf for an input of 0.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c9aa9a0add)
When the input's xyz are 0.0, the output
should be 0.0. This is due to the fact that
Inf * 0 = 0 for dx9. To handle this case,
cap the result of RSQ to FLT_MAX. We have
FLT_MAX * 0 = 0.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit f5e8e3fb80)
We should use the absolute value of the input as input to ureg_RSQ.
Moreover, an input of 0.0 should return FLT_MAX.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 2487f73574)
POW doesn't match directly TGSI, since we should
take the absolute value of src0.
Fixes black textures in some games
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit c12f8c2088)
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit e0dd9ca985)
Let's say we have c1 and c2 declared in the shader and c0 given by the app
Then here we would have read c0, c1 and c2 given by the app, instead
of the correct c0, c1, c2.
This correction fixes several issues in some games.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 53dc992f20)
According to docs and Wine, these two vs outputs have
to be saturated.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9fb58a74a0)
The shader code is already behaving as if they are floats when the the card doesn't support integers
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d08c7b0b88)
Convert them to shader booleans at earlier stage.
Previous code is fine, but later patch will make
integers being converted at earlier stage, so do
the same for booleans
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d9d18fe39f)
Adds ATI1 and ATI2 support to nine.
They map to PIPE_FORMAT_RGTC1_UNORM and PIPE_FORMAT_RGTC2_UNORM,
but need special handling.
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 77f0ecf9ce)
According to msdn, we must act as if user didn't ask srgb if we don't
support it.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit b0b5430322)
Buffers in the MANAGED pool are supposed to have the content in a ram buffer,
a copy in VRAM if there is enough memory (driver manages memory and decide when
to delete the buffer in VRAM).
This is not implemented properly in nine, and a VRAM copy is going to be created
when the RAM memory is filled, and the VRAM copy will get synced with the RAM
memory updates.
Due to some issues (in the implementation or in app logic), it can happen
we try to create a sampler view of the resource while we haven't created the
VRAM resource. This hack creates the resource when we hit this case, which prevents
crashing, but doesn't help with the resource content.
This fixes several games crashing at launch.
Acked-by: Axel Davy <axel.davy@ens.fr>
Acked-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Stanislaw Halik <sthalik@misaki.pl>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 82810d3b66)
While previous code was having the correct behaviour in general,
this new code is more readable (without checking all gallium formats
manually) and has a more defined behaviour for depth stencil resources.
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 47280d777d)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 0abfb80dac)
The implicit swapchains are destroyed when the device instance is
destroyed. However for non-implicit swapchains, it is not the case,
and the application can have kept an reference on the swapchain
buffers to reuse them.
Fixes problems with battle.net launcher.
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
Tested-by: Nick Sarnie <commendsarnex@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
(cherry picked from commit 0d2c22e648)
This->surfaces contains the surfaces associated to the levels
and faces. This->surfaces[6*Level] is what we want here,
since it gives us a face descriptor for the level 'Level'.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 9232161178)
Use same similar settings as u_sampler_view_default_template
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 18c7e70226)
The cap means D3DFVF_XYZRHW vertices will see clipping.
This is not the case when
PIPE_CAP_TGSI_VS_WINDOW_SPACE_POSITION is supported, since
it'll disable clipping.
Reviewed-by: Tiziano Bacocco <tizbac2@gmail.com>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 05e20e1045)
It's done by testing the existence of the point sprite output register *after* parsing the vertex shader.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Axel Davy <axel.davy@ens.fr>
Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit dc88989189)
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Cc: "10.4" <mesa-stable@lists.freedesktop.org>
(cherry picked from commit d2f2a550cf)
