autotools doesn't have any requirement. This fixes meson on Ubuntu 16.04.
Cc: 18.3 19.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
(cherry picked from commit 1e85cfb91a)
This reverts commit 378f996771.
This also remove the default true argument from the a2xx nir backend,
which was introduced after this commit. There should be no change in
functionality.
When nir_rematerialize_derefs_in_use_blocks_impl was first written, I
attempted to optimize things a bit by not bothering to re-materialize
the sources of deref instructions figuring that the final caller would
take care of that. However, in the case of more complex deref chains
where the first link or two lives in block A and then another link and
the load/store_deref intrinsic live in block B it doesn't work. The
code in rematerialize_deref_in_block looks at the tail of the chain,
sees that it's already in block B and skips it, not realizing that part
of the chain also lives in block A.
The easy solution here is to just rematerialize deref sources of deref
instructions as well. This may potentially lead to a few more deref
instructions being created by the conditions required for that to
actually happen are fairly unlikely and, thanks to the caching, it's all
linear time regardless.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109603
Fixes: 7d1d1208c2 "nir: Add a small pass to rematerialize derefs per-block"
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
(cherry picked from commit 9e6a6ef0d4)
We used to pre-set a bunch of extra arguments to a texture instruction
in order to force the RA to allocate a register at the boundary of 4.
However with the levelZero optimization, which removes a LOD argument
when it's uniformly equal to zero, we undid that logic by removing an
extra argument. As a result, we could end up with insufficient alignment
on the second wide texture argument.
Instead we switch to a different method of achieving the same result.
The logic runs during the constraint analysis of the RA, and adds unset
sources as necessary right before being merged into a wide argument.
Fixes MISALIGNED_REG errors in Hitman when run with bindless textures
enabled on a GK208.
Fixes: 9145873b15 ("nvc0/ir: use levelZero flag when the lod is set to 0")
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: 19.0 <mesa-stable@lists.freedesktop.org>
(cherry picked from commit 5de5beedf2)
We're writing to the bo and the kernel needs to know for
fd_bo_cpu_prep() to work.
Fixes: f93e431272 ("freedreno/a6xx: Enable blitter")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
(cherry picked from commit 357ea7da51)
Can happen e.g. after a phi.
Fixes: a2b5cc3c39 "radv: enable variable pointers"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 8d1718590b)
For example with VK_EXT_buffer_device_address or
VK_KHR_variable_pointers.
Fixes: a2b5cc3c39 "radv: enable variable pointers"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 00253ab2c4)
Fixes: c7b65dcaff "xvmc: Define some Xv attribs to allow users
to specify color standard and procamp"
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 110a6e1839)
Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 927ba12b53 ("anv/tests: Adding test for the state_pool padding.")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com><Paste>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit 8943eb8f03)
sizeof counts the terminating null character as well, so that also
contributed to the ID computed for the X11 atom. But the convention is
for only the non-null characters to contribute to the atom ID.
Fixes: 2e12fe425f "loader/dri3: Enable adaptive_sync via
_VARIABLE_REFRESH property"
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit c0a540f320)
Transform feedback did not set correct SO_DECL.ComponentMask for
varyings packed in VARYING_SLOT_PSIZ:
gl_Layer - VARYING_SLOT_LAYER in VARYING_SLOT_PSIZ.y
gl_ViewportIndex - VARYING_SLOT_VIEWPORT in VARYING_SLOT_PSIZ.z
gl_PointSize - VARYING_SLOT_PSIZ in VARYING_SLOT_PSIZ.w
Fixes: 36ee2fd61c "anv: Implement the basic form of VK_EXT_transform_feedback"
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 64d3b148fe)
Previously, we only applied the fix to shaders with a dispatch mode of
SIMD8 but the code it relies on for SIMD16 mode only applies to SIMD16
instructions. If you have a SIMD8 instruction in a SIMD16 shader,
neither would trigger and the restriction could still be hit.
Fixes: 232ed89802 "i965/fs: Register allocator shoudn't use grf127..."
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b4f0d062cd)
We need to initialize all fields in rs->prim explicitly while
creating new rastpos stage.
Fixes: bac8534267 ("st/mesa: allow glDrawElements to work with GL_SELECT
feedback")
v2: Initializing all fields in rs->prim as per Ilia.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
(cherry picked from commit 69d736b17a)
Reported by Coverity: in the case of unsupported modifier request, the
code does not jump to the “fail” label to destroy the acquired resource.
CID: 1435704
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Fixes: 45bb8f2957 ("broadcom: Add V3D 3.3 gallium driver called "vc5", for BCM7268.")
(cherry picked from commit 90458bef54)
This was copy-and-paste fail, that oddly showed up in the CTS's
reinterprets of r32f, rgba8, and srgba8 to rgba8i, but not r32ui and r32i
to rgba8i or reinterprets to other signed int formats.
Fixes: 6281f26f06 ("v3d: Add support for shader_image_load_store.")
(cherry picked from commit ab4d5775b0)
One of the CTS cases tries to invalidate just stencil of packed
depth/stencil, and we incorrectly lost the depth contents.
Fixes dEQP-GLES3.functional.fbo.invalidate.whole.unbind_read_stencil
Fixes: 0c42b5f3cb ("mesa: wire up InvalidateFramebuffer")
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit db2ae51121)
Fixes: b4476138d5 freedreno: move drm to common location
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit e252656d14)
This fixes serious stuttering in Shadow Of The Tomb Raider.
Fixes: 50fd253bd6 ("radv/winsys: Add priority handling during submit.")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 9c762c01c8)
Reported by Coverity: in the case where there exist hardware and
non-hardware queries, the code does not jump to err_free_query and leaks
the query.
CID: 1430194
Signed-off-by: Ernestas Kulik <ernestas.kulik@gmail.com>
Fixes: 9ea90ffb98 ("broadcom/vc4: Add support for HW perfmon")
(cherry picked from commit f6e49d5ad0)
Earlier commit addressed 7 of the 8 instances available.
v2: Rebase patch back to master (by anholt)
Cc: Carsten Haitzler (Rasterman) <raster@rasterman.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 300d3ae8b1 ("vc4: Declare the cpu pointers as being modified in NEON asm.")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit 385843ac3c)
Android.mk and autotools disagree about where generated files should
go, which wasn't a problem until we wanted to build a dist
tarball. This corrects the problme by changing the output and include
paths to be the same on android and autotools (meson already has the
correct include path).
Fixes: 7d7b30835c
("automake: Fix path to generated source")
It is currently impossible to build a dist tarball that works when SWR
requires LLVM 6. To generate the tarball we'd need to configure with
LLVM 6, which is fine. But to build the dist check we need LLVM 7, as
RadeonSI and RadV require that version. Unfortunately the headers
genererated with LLVM 6 don't compile with LLVM 7, the API has changed
between the two versions.
I weighed a couple of options here. One would be to ship an
unbootstrapped tarball generated with meson. This would fix the issue
by not bootstrapping, so whatever version of LLVM used would work
because the SWR headers would be generated at compile
time. Unfortunately this would involve some heavy modifications to the
infastructure used to upload the tarballs, and I've decided not to
persue this.
Use the trick of adding and then subtracting 2**52 (52 is the number of
explicit mantissa bits a double-precision floating-point value has) to
implement round-to-even.
Cuts the number of instructions on SKL of the piglit test
fs-roundEven-double.shader_test from 109 to 21.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This batch->cleared value is only used to decide to use sysmem rendering
or not, so it should include any buffers that are affected by a clear.
This is required because the a2xx fast clear doesn't work with sysmem
rendering. The a22x "normal" clear path doesn't work with sysmem either.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Depth can be used even when there is no restore/resolve of depth. This
happens when the depth buffer is invalidated after rendering to avoid
the resolve operation.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Set dirty bits on invalidate to trigger invalidate logic in fd_draw_vbo.
Also, resource_written for color needs to be after the invalidate logic.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
And before someone actually starts implementing DiscardFramebuffer()
lets rework the interface to something that is actually usable.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This allows freedreno to be aware of the depth invalidate when flushing
batches on flush_resource.
AFAIK, the only other driver which might care about this change is vc4,
where I think it should help by allowing the depth invalidate to work with
GALLIUM_HUD.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Check if a pixel format is supported by the Wayland servers gpu driver
before exposing it to the client via wl_drm, so we avoid reporting formats
to the client which the server gpu can't handle.
Restrict this reporting to the new color depth 30 formats for now, as the
ARGB/XRGB8888 and RGB565 formats are probably supported by every gpu under
the sun.
Atm. this is mostly useful to allow proper PRIME renderoffload for depth
30 formats on the typical Intel iGPU + NVidia dGPU "NVidia Optimus" laptop
combo.
Tested on Intel, AMD, NVidia with single-gpu setup and on a Intel + NVidia
Optimus setup.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
