Silence two unused var warnings. And init elem_size, elem_align to
zero to silence "maybe uninitialized" warnings.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
spirv_to_nir() returned the nir_function corresponding to the
entrypoint, as a way to identify it. There's now a bool is_entrypoint
in nir_function and also a helper function to get the entry_point from
a nir_shader.
The return type reflects better what the function name suggests. It
also helps drivers avoid the mistake of reusing internal shader
references after running NIR_PASS on it. When using NIR_TEST_CLONE or
NIR_TEST_SERIALIZE, those would be invalidated right in the first pass
executed.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It is possible and valid for a pointer to be selected based on a
conditional before used, and depending on the mode, those cases will
result in a phi with derefs as sources.
To achieve this, we don't rematerialize derefs that are used by phis.
As a consequence, when converting from SSA to regs, we may have phis
that come from different blocks and are used by phis. We now convert
those to regs too.
Validation was added to ensure only derefs of certain modes can be
used as phi sources. No extra validation is needed for the presence
of cast, any instruction that uses derefs will validate the
deref-chain is complete (ending in a cast or a var).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We scalarize IO to enable further optimizations, such as propagating
constant components across shaders, eliminating dead components, and
so on. This patch attempts to re-vectorize those operations after
the varying optimizations are done.
Intel GPUs are a scalar architecture, but IO operations work on whole
vec4's at a time, so we'd prefer to have a single IO load per vector
rather than 4 scalar IO loads. This re-vectorization can help a lot.
Broadcom GPUs, however, really do want scalar IO. radeonsi may want
this, or may want to leave it to LLVM. So, we make a new flag in the
NIR compiler options struct, and key it off of that, allowing drivers
to pick. (It's a bit awkward because we have per-stage settings, but
this is about IO between two stages...but I expect drivers to globally
prefer one way or the other. We can adjust later if needed.)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The difference between imov and fmov has been a constant source of
confusion in NIR for years. No one really knows why we have two or when
to use one vs. the other. The real reason is that they do different
things in the presence of source and destination modifiers. However,
without modifiers (which many back-ends don't have), they are identical.
Now that we've reworked nir_lower_to_source_mods to leave one abs/neg
instruction in place rather than replacing them with imov or fmov
instructions, we don't need two different instructions at all anymore.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Rob Clark <robdclark@chromium.org>
Unless source modifiers are present, fmov and imov are the same.
There's no good reason for having two helpers.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
It's potentially a tiny bit less efficient but the helpers make it much
easier to sort out the rules for updating source modifiers.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
This flag has caused more confusion than good in most cases. You can
validly use imov for floats or fmov for integers because, without source
modifiers, neither modify their input in any way. Using imov for floats
is more reliable so we go that direction.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
This greatly simplifies the code to calculate if we should add a
buffer to the resource list. This uses the spec rules and simple
math to decide if we should add the buffer rather than complex
string processing.
This patch refines a patch present in the ARB_gl_spriv merge
request for the NIR linker and applies it to the GLSL IR linker.
This is why we also move the function to the shared linker code,
because we will want to reuse the code for the NIR linker also.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
SPV_GOOGLE_decorate_string and SPV_GOOGLE_hlsl_functionality1 were
incorporated to SPIR-V. Let's pick the names used by SPIR-V core.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Choose the first we see in the grammar file as the main one. This is
needed to parse SPIR-V 1.4 because it introduced opcode aliases.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
%error-verbose has been deprecated since Bison 3.0, which was released
in 2013. In Bison 3.3.1 which was recently released, this has started
causing warnings. Let's update the code to do this in the modern way
intead, to avoid cluttering the output needlessly.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This just adds some split var splitting tests, it verifies
by counting derefs and local vars.
a basic load from inputs, store to array,
same as before but with a shader temp
struct { float } [4] don't split test
a basic load from inputs, with some out of band loads.
a load/store of only half the array
two level array, load from inputs store to all levels
a basic load from inputs with an indirect store to array.
two level array, indirect store to lvl 0
two level array, indirect store to lvl 1
load from inputs, store to array twice
load from input, store to array, load from array, store to another array.
load and from input and copy deref to array
create wildcard derefs, and do a copy
v2: use array_imm helpers, move derefs out of loops,
rename toplevel/secondlevel, use ints, fix lvl1 don't split test,
rename globabls to shader_temp, add comment, check the derefs type
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
When num_state_slots is 0, don't create the array. This was
triggering the following assert when running vkcube with
NIR_TEST_CLONE=1
vkcube: ../src/compiler/nir/nir_split_per_member_structs.c:66:
split_variable: Assertion `var->state_slots == NULL' failed.
Fixes: 9fbd390dd4 "nir: Add support for cloning shaders"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Use the storage class address format information to pick the right
constant values for a NULL pointer.
v2: Don't add a deref_cast to the values. (Jason)
v3: Update to use vtn_storage_class_to_mode() and
vtn_mode_to_address_format() explicitly. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
And change vtn_storage_class_to_mode() to accept NULL as
interface_type. In this case, if we have a SpvStorageClassUniform, we
assume it is uses an ubo_addr_format, like the code being replaced by
the helper.
That assumption is a problem, but no different than the previous
code.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Corresponding to SpvStorageClassImage. We see pointers for that
storage class in tests, but don't use the storage class any further.
Adding this so that we can call vtn_mode_to_address_format() for all
supported pointers.
v2: Fail when trying to create a SpvStorageClassImage
variable. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Handles all the modes and we can use it in combination with
nir_address_format_to_glsl_type() to replace the
vtn_ptr_type_for_mode() helper. Since the new helper is more generic,
moved the assertions from the old one to the call sites.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just the mode is needed to decide whether SSA offsets are needed, so
make a function that takes that and reuse it for
vtn_pointer_uses_ssa_offset().
This will be used for constant null pointers, that won't have a
vtn_pointer handy.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
v2: Renamed from vtn_interface_type. (Jason)
Accept any type not only pointers.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a preparation to handle OpConstantNull for pointers, we'll use
the vtn_type to get to the address format and then the appropriate
representation of NULL pointer.
v2: Move rest of body to use vtn_type. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Returns the nir_const_value * with the representation of the NULL
pointer for each address format.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead of setting the glsl types of the pointers for each resource,
set the nir_address_format, from which we can derive the glsl_type,
and in the future the bit pattern representing a NULL pointer.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is a simple 32-bit address which is not a global address. Gives
us a format that don't use 0 as its null pointer value. We will need
this in anv to represent nir_var_mem_shared addresses.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
An address format representing a purely logical addressing model. In
this model, all deref chains must be complete from the dereference
operation to the variable. Cast derefs are not allowed. These
addresses will be 32-bit scalars but the format is immaterial because
you can always chase the chain. E.g. push constants in anv.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
we validate assert entry just before this, but since that doesn't
stop execution, we need to check entry before the next validation
assert.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
glsl_to_nir.cpp:276: uninit_member: Non-static class member "sig" is not initialized in this constructor nor in any functions that it calls.
Reported by coverity
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
link_uniforms.cpp:477: uninit_member: Non-static class member "shader_storage_blocks_write_access" is not initialized in this constructor nor in any functions that it calls.
Reported by coverity.
v2: fix 9->0 typo (Ilia)
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
src/compiler/glsl_types.cpp:577: uninit_member: Non-static class member "packed" is not initialized in this constructor nor in any functions that it calls.
from Coverity.
Fixes: 659f333b3a (glsl: add packed for struct types)
Acked-by: Ilia Mirkin <imirkin@alum.mit.edu>
If the SSA def produced by this instruction is only in the block in
which it is defined and is not used by ifs or phis, then we don't have
a reason to convert it to a register in
nir_lower_ssa_defs_to_regs_block().
The special case for derefs is covered by the general case, so can be
removed: at this point all derefs in the block are
materialized (i.e. the whole deref chain is in the block) and derefs
are not used in phis.
v2: Fix wrong check for if_uses. If there's such an use, the def is
not "local_to_block". (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
First, allow the case for negative powers of two. Then ensure that we
use the absolute value of the non-constant value to calculate the
quotient -- this was hinted in the code by the name 'uq'.
This fixes an issue when 'd' is positive and 'n' is negative. The
ishr will propagate the negative sign and we'll use nir_ineg() again,
incorrectly.
v2: First version used only ishr, but that isn't sufficient, since it
never can produce a zero as a result. (Jason)
Allow negative powers of two. (Caio)
Fixes: 74492ebad9 "nir: Add a pass for lowering integer division by constants"
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This pass moves instructions around and adds control-flow in the
middle of blocks. We need to use nir_foreach_instr_safe to ensure that
we iterate over instructions correctly anyway.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 3bd5457641 ("nir: Add a lowering pass for non-uniform resource access")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This line is no longer relevant now that booleans are 1-bit, and in fact
causes issues (infinite progress loop between algebraic optimizations
and copy prop) with constant vector masks.
No shader-db changes on Intel platforms (Jason).
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Obviously missing the instruction insertion into the SSA list.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 3bd5457641 ("nir: Add a lowering pass for non-uniform resource access")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The goal is to avoid having an extra MOV instruction to perform the
saturate. Doing the subtraction first allows the saturate to be applied
to the ADD instruction making the MOV unnecessary. Values generated in
different block and values from non-ALU instructions (e.g., texture
instructions) almost always need the extra MOV.
Multiply instructions are restricted because doing this rearrangement
can interfere with the generation of flrp and ffma instructions.
v2: Now that the final method has been selected, squash three commits
into one.
All Intel platforms has similar results. (Ice Lake shown)
total instructions in shared programs: 17223214 -> 17219386 (-0.02%)
instructions in affected programs: 1524376 -> 1520548 (-0.25%)
helped: 2686
HURT: 26
helped stats (abs) min: 1 max: 32 x̄: 1.44 x̃: 1
helped stats (rel) min: 0.03% max: 16.67% x̄: 0.54% x̃: 0.37%
HURT stats (abs) min: 1 max: 2 x̄: 1.69 x̃: 2
HURT stats (rel) min: 0.33% max: 1.67% x̄: 0.54% x̃: 0.35%
95% mean confidence interval for instructions value: -1.46 -1.36
95% mean confidence interval for instructions %-change: -0.56% -0.50%
Instructions are helped.
total cycles in shared programs: 360811571 -> 360791896 (<.01%)
cycles in affected programs: 103650214 -> 103630539 (-0.02%)
helped: 1557
HURT: 675
helped stats (abs) min: 1 max: 1773 x̄: 41.44 x̃: 16
helped stats (rel) min: <.01% max: 26.77% x̄: 1.37% x̃: 0.64%
HURT stats (abs) min: 1 max: 1513 x̄: 66.44 x̃: 14
HURT stats (rel) min: <.01% max: 46.16% x̄: 2.00% x̃: 0.49%
95% mean confidence interval for cycles value: -14.82 -2.81
95% mean confidence interval for cycles %-change: -0.50% -0.20%
Cycles are helped.
LOST: 2
GAINED: 0
Reviewed-by: Matt Turner <mattst88@gmail.com> [v1]
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
The value-range tracking pass that is coming is not clever enough to
know that the result of the ffma must be non-negative. Making it that
smart will require quite a bit of work. It might be possible to add a
special case that detects that a whole tree of fadd(fmul(fsat(a),
fneg(fsat(a))), 1.0) cannot be negative.
For cases when the comparison is used in the domain guard for a
square-root (see nir/algebraic: Simplify fsqrt domain guard), the
compare may be converted to a fmax. This patch also handles that case.
All of the affected cases are in DiRT: Showdown.
All Gen7+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs: 17225365 -> 17225303 (<.01%)
instructions in affected programs: 40051 -> 39989 (-0.15%)
helped: 62
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 0.07% max: 0.66% x̄: 0.27% x̃: 0.26%
95% mean confidence interval for instructions value: -1.00 -1.00
95% mean confidence interval for instructions %-change: -0.31% -0.22%
Instructions are helped.
total cycles in shared programs: 360842788 -> 360842595 (<.01%)
cycles in affected programs: 1818081 -> 1817888 (-0.01%)
helped: 29
HURT: 22
helped stats (abs) min: 1 max: 206 x̄: 20.66 x̃: 14
helped stats (rel) min: <.01% max: 9.55% x̄: 0.87% x̃: 0.42%
HURT stats (abs) min: 1 max: 108 x̄: 18.45 x̃: 7
HURT stats (rel) min: <.01% max: 4.48% x̄: 0.56% x̃: 0.19%
95% mean confidence interval for cycles value: -14.48 6.91
95% mean confidence interval for cycles %-change: -0.71% 0.21%
Inconclusive result (value mean confidence interval includes 0).
No changes on any other Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
