This makes more sense than OUT_OF_HOST_MEMORY. Technically, you can
recover from a failed execbuf2 but the batch you just submitted didn't
fully execute so things are in an ill-defined state. The app doesn't want
to continue from that point anyway.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The emission of vertex attributes corresponding to dvec3 and dvec4
vertex shader input variables was not correct when the <size> passed
to the VertexAttribL* commands was <= 2.
This was because we were using the vertex array size when emitting vertices
to decide if we uploaded a 64-bit floating point attribute as 1 slot (128-bits)
for sizes 1 and 2, or 2 slots (256-bits) for sizes 3 and 4. This caused problems
when mapping the input variables to registers because, for deciding which
registers contain the values uploaded for a certain variable, we use the size
and type given to the variable in the shader, so we will be assigning 256-bits
to dvec3/4 variables, even if we only uploaded 128-bits for them, which happened
when the vertex array size was <= 2.
The patch uses the shader information to only emit as 128-bits those 64-bit floating
point variables that were declared as double or dvec2 in the vertex shader. Dvec3 and
dvec4 variables will be always uploaded as 256-bits, independently of the <size> given
to the VertexAttribL* command.
From the ARB_vertex_attrib_64bit specification:
"For the 64-bit double precision types listed in Table X.1, no default
attribute values are provided if the values of the vertex attribute variable
are specified with fewer components than required for the attribute
variable. For example, the fourth component of a variable of type dvec4
will be undefined if specified using VertexAttribL3dv or using a vertex
array specified with VertexAttribLPointer and a size of three."
We are filling these unspecified components with zeros, which coincidentally is
also what the GL44-CTS.vertex_attrib_binding.basic-inputL-case1 expects.
v2: Do not use bitcount (Kenneth Graunke)
Fixes: GL44-CTS.vertex_attrib_binding.basic-inputL-case1 test
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97287
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We require 12 bytes of headers but in some cases we just need 4.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
3DSTATE_WM_CHROMAKEY isn't programmed anywhere else.
3DSTATE_WM_HZ_OP is programmed, then cleared by blorp during a
HZ op, so repeatedly clearing it after every blorp execution is
redundant.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This packet is non-pipelined and doesn't ever change across emissions.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
When the video coded size is different from frame size, we need the result
buffers are same as coded size, which are not size compatible with encode
required size, so that simply use no tunnel for this case instead of frame
by frame converting.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Cc: 13.0 <mesa-stable@lists.freedesktop.org>
Otherwise fails the check of matching between decoder size and buffers
size in kernel.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Cc: 13.0 <mesa-stable@lists.freedesktop.org>
Add frontend dependency concept in the DRAW_CONTEXT, which
allows serialization of frontend work if necessary.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
This allows the post-processor to easily detect the API thread and to
process frame information. The frame information is needed to
optimized how data is processed from worker threads.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
only do it in rzalloc_size as it was supposed to be
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
No change in behavior. ralloc_size is equivalent to rzalloc_size.
That will change though.
Calls not switched to rzalloc_size:
- ralloc_vasprintf
- glsl_type::name allocation (it's filled with snprintf)
- C++ classes where valgrind didn't show uninitialized values
I switched most of non-glsl stuff to rzalloc without checking whether
it's really needed.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
this fixes some of the regressions with
"ralloc: remove memset from ralloc_size"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Switch to use memory allocations which zero memory for places
where needed.
v2: modify and rebase on top of Marek's series (Tapani)
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
time GALLIUM_NOOP=1 ./run shaders/private/alien_isolation/ >/dev/null
Before (2 takes):
real 0m8.734s 0m8.773s
user 0m34.232s 0m34.348s
sys 0m0.084s 0m0.056s
After (2 takes):
real 0m8.448s 0m8.463s
user 0m33.104s 0m33.160s
sys 0m0.088s 0m0.076s
Average change in "real" time spent: -3.4%
calloc should only do 2 things compared to malloc:
- check for overflow of "n * size"
- call memset
I'm not sure if that explains the difference.
v2: clear "parent" and "next" in the caller of add_child.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> (v1)
Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com> (v1)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
The options specified in the CLOVER_EXTRA_BUILD_OPTIONS shell
variable are appended to the options specified by the OpenCL program
in the clBuildProgram function call, if any.
Analogously, the options specified in the CLOVER_EXTRA_COMPILE_OPTIONS
and CLOVER_EXTRA_LINK_OPTIONS variables are appended to the options
specified in clCompileProgram and clLinkProgram function calls,
respectively.
v2:
* rename to CLOVER_EXTRA_COMPILER_OPTIONS
* use debug_get_option
* append to linker options as well
v3: code cleanups
v4: separate CLOVER_EXTRA_LINKER_OPTIONS options
v5:
* fix documentation typo
* use CLOVER_EXTRA_COMPILER_OPTIONS in link stage
v6:
* separate in CLOVER_EXTRA_{BUILD,COMPILE,LINK}_OPTIONS
* append options in cl{Build,Compile,Link}Program
Signed-off-by: Vedran Miletić <vedran@miletic.net>
Reviewed-by[v1]: Edward O'Callaghan <funfunctor@folklore1984.net>
v7 [Francisco Jerez]: Slight simplification.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
OpenCL apps can quote arguments they pass to the OpenCL compiler, most
commonly include paths containing spaces.
If the Clang OpenCL compiler was called via a shell, the shell would
split the arguments with respect to to quotes and then remove quotes
before passing the arguments to the compiler. Since we call Clang as a
library, we have to split the argument with respect to quotes and then
remove quotes before passing the arguments.
v2: move to tokenize(), remove throwing of CL_INVALID_COMPILER_OPTIONS
v3: simplify parsing logic, use more C++11
v4: restore error throwing, clarify a comment
Signed-off-by: Vedran Miletić <vedran@miletic.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
