The CCS could be described in a number of ways, but this format was
chosen to minimize churn in the drivers. We may decide on an different
direction in the future.
v2. Increase alignment for display surfaces. (Nanley)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Use a helper that will automatically handle Gen12's CCS tiling when
creating a CCS isl_surf.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reworks:
* Fill out the format's entry in the ISL format table. (Nanley)
* Support CCS_E-enabled BLORP copies with the format. (Nanley)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Aligning phys_level0_sa by the compression block dimension prior to
mipmap layout causes the layout of compressed surfaces to differ from
the sampler's expectations in certain cases. The hardware docs agree:
From the BDW PRM, Vol. 5, Compressed Mipmap Layout,
The compressed mipmaps are stored in a similar fashion to
uncompressed mipmaps [...]
The following exceptions apply to the layout of compressed (vs.
uncompressed) mipmaps:
* [...]
* The dimensions of the mip maps are first determined by applying
the sizing algorithm presented in Non-Power-of-Two Mipmaps
above. Then, if necessary, they are padded out to compression
block boundaries.
The last bullet indicates that alignment should not be done for
calculating a miplevel's dimensions, but rather for determining miplevel
placement/padding. Comply with this text by removing the extra
alignment.
Fixes some fbo-generatemipmap-formats piglit failures on all tested
platforms (SNB-KBL).
v2:
- Note fixed platforms.
- Update some consumers via a helper function.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Prepare for a bug fix by adding and using helpers which convert
isl_surf::logical_level0_px and isl_surf::phys_level0_sa to units of
surface elements.
v2:
- Update iris (Ken).
- Update anv.
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I recently discovered that the following code lead to valgrind errors:
struct isl_swizzle swizzle = ISL_SWIZZLE_IDENTITY;
VALGRIND_CHECK_MEM_IS_DEFINED(&swizzle, sizeof(swizzle));
which is surprising, because struct isl_swizzle is simply:
struct isl_swizzle {
enum isl_channel_select r:4;
enum isl_channel_select g:4;
enum isl_channel_select b:4;
enum isl_channel_select a:4;
};
and the above code initializes all of them with a C99 initializer.
Iván Briano reminded me that C99 initializers don't necessarily zero
padding. A quick inspection revealed that sizeof(struct isl_swizzle)
was 4 (rather than the expected 2). Ian Romanick suggested changing
it to uint16_t, since this is essentially dicing up an unsigned, and
that worked.
This patch marks enum isl_channel_select packed, changing its size
from 4 bytes to 1 byte. This then makes struct isl_swizzle 2 bytes,
with no bogus padding fields. This eliminates valgrind undefined
memory warnings.
These isl_swizzle values become part of our BLORP blit program keys,
which are then hashed. This undefined padding was being included in
the hashing, possibly leading to issues. I originally saw this error
when running KHR-GL45.texture_size_promotion.functional in iris under
valgrind.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is necessary for legacy texture buffer object formats, where we'll
need to use a swizzle to fake e.g. luminance.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Patch moves intel_tiled_memcpy[_sse41] libraries to isl, renames some
functions and types and makes the required build system changes for
meson, automake and Android. No functional changes are introduced.
v2: code cleanups, move isl_get_memcpy_type to i965 (Jason)
v3: move isl_mem_copy_fn to priv header, cleanups (Jason, Dylan)
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
I was about to make the claim to someone that every field in isl_surf
is either an enum or has explicit units. Then I looked at isl_surf and
discovered this claim was wrong. We should fix that. This commit does
a few refactors:
* Add _B suffixes to some struct fields
* Add _B to some variables and parameters
* Rename row_pitch_tiles -> row_pitch_tl
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
We add two assertions instead of one because the first assertion that
format != ISL_FORMAT_UNSUPPORTED is more descriptive and checks for a
real but unsupported enumerant while the second ensures that they don't
pass in garbage values. We also update some other helpers to use
isl_format_get_layout instead of using the table directly so that they
get bounds checking too.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This adds helpers to ISL to convert an isl_color_value to and from
binary data encoded with a given isl_format. The conversion is done
using ISL's built-in format introspection so it's fairly slow as format
conversions go but it should be fine for a single pixel value. In
particular, we can use this to convert clear colors.
As a side-effect, we now rely on the sRGB helpers in libmesautil so we
need to tweak the build system a bit. All prior uses of src/util in ISL
were header-only.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This helper encodes more details, specifically about Haswell, than the
previous asserts in isl_surface_state.c.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
gen10 can emit the clear color by setting it on a buffer somewhere, and
then adding only the address to the surface state.
This commit add support for that on isl_surf_fill_state, and if that is
requested, skip setting the clear value itself.
v2: Add assert to make sure we are at least on gen10.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The size of the clear color struct (expected by the hardware) is 8
dwords (isl_dev.ss.clear_value_state_size here). But we still need to
track the size of the clear color, used when memcopying it to/from the
state buffer. For that we keep isl_dev.ss.clear_value_size.
v4:
- Add struct to gen11 too (Jason, Jordan)
- Add field for Converted Clear Color to gen11 (Jason)
- Add clear_color_state_offset to differentiate from
clear_value_offset.
- Fix all the places where clear_value_size was used.
v5 (Jason):
- Split genxml changes to another commit.
- Remove unnecessary gen checks.
- Bring back missing offset increment to init_fast_clear_color().
v6 (Jason):
- On init_fast_clear_color, change:
addr.offset += 4 => sdi.Address.offset += i * 4
- Use GEN_GEN instead of GEN_VERSIONx10.
[jordan.l.justen@intel.com: isl_device_init changes]
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Right now, we have different entrypoints and enums in blorp for these
different operations. This provides us a central enum which we can
begin to transition to.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
ISL already offers functions to fill out most kinds of SURFACE_STATE,
so why not handle null surfaces too?
Null surfaces are simple, so we can just take the dimensions, rather
than an entirte fill structure.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: move is_aux into if block. (Jason)
Use else block instead of goto (Jason)
v3: Fix up logic for is_aux (Ben)
Fix up size calculations and add FIXME (Ben)
v4 (Jason Ekstrand):
Use the aux_pitch in the image instead of calculating it
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
We already have a helper for doing this in BLORP, this just moves the
logic into ISL where we can share it with other components.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This will be used to load and store clear values from surface state
objects.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: s/i915_tiling_to_isl_tiling(/isl_tiling_from_i915_tiling/
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This enum describes all of the states that a auxiliary compressed
surface can have. All of the states as well as normative language for
referring to each of the compression operations is provided in the
truly colossal comment for the new isl_aux_state enum. There is also
a diagram showing how surfaces move between the different states.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Frequently, get_image_offset_sa is combined with get_intratile_offset_sa
so it makes sense to have a single helper to do both. If the caller
doesn't want the intratile offsets, it can simply pass NULL and ISL will
assert that they are 0.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
We were only using it for validating that we don't use Ys/Yf on gen8 and
earlier. Removing it from isl_tiling_get_info lets us remove it from a
bunch of other things that had no business needing a hardware
generation.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
