Just get all the information we need from u_format, rather than keeping
it in hand-written tables.
If you have bisected any kind of failure to this commit, please build
the previous commit in debug mode (so that assertions are enabled) and
check if there are any runtime failures. If so, there is a difference
between the u_format descriptions and the handwritten descriptions that
this commit deletes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27709>
Similar to util_format_get_component_bits, get the bit offset for a
particular channel in a given format.
Use this to calculate the shift/mask sets for formats when creating DRI
configs, as a prelude to ripping out and replacing the hardcoded table.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27709>
Now that we have both the pipe_format and the mesa_format available to
us, prefer the former so we don't need to map between the two worlds.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27709>
These aren't used by any external DRI callers, so unexport them and
redeclare them in terms of PIPE_FORMAT_*, so we can flatten them down
later.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27709>
When we're binding a GL texture to an EGLImage, we have to be sure to
check the right resource. A GL texture resource can contain multiple
pipe_resources on different levels; so once we get the texture object,
we have to chase that down to a texture image before we use the
pipe_resource.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27709>
This doesn't seem supported and introduced regressions on
Pitcairn/Tahiti, but it seems fine on Bonaire (GFX7).
Fixes: 926d9f1cef ("radv: support minmax filter for more formats")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27760>
We have couple of dynamic fields used on >= gfx125, ScratchSpaceBuffer
and TessellationDistributionMode. There are also 2 workarounds dealing
with TessellationDistributionMode. These changes make sure that we
always emit both DS and TE together when the dynamic fields need to be
changed.
This fixes KHR-Single-GL46.arrays_of_arrays_gl.AtomicUsage on MTL.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/10636
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27753>
This adds support for AV1 decode to radv, there are likely some
cleanups necessary.
Co-author: Charlie Turner <cturner@igalia.com>
(I wrote the initial mesa extension, and Charlie ported it to
the KHR extension and kept it up to date and fixed CTS things)
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27424>
This parallels changes made to the radeonsi code, but since we have uvd
in here as well we still use family in some places.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27424>
The prior refactor has missed a case that timeline sempahore can be
ping-pong'ed between device signal and host wait.
Fixes: d63432012d ("venus: refactor semaphore feedback")
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Reported-by: Juston Li <justonli@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27807>
There is more to do but this is able to parse batch buffers, including
fetch and parse other bos like shader programs.
Some functions used by read_i915_data_file() could be shared with Xe
so I have moved those to aubinator_error_decode_lib.c/h.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27661>
To ask Xe KMD to dump BO/VMA content to error state it is necessary to
set DRM_XE_VM_BIND_FLAG_DUMPABLE during VM bind, so places that were
setting 'bo.real.capture = true' after the VM bind were useless for
Xe KMD.
To fix that BO_ALLOC_CAPTURE was added, alloc_fresh_bo() will set
'bo.real.capture = true' automaticacly for new bos before vm bind.
alloc_bo_from_cache() also required to check if capture states matches
between asked bo and bo in cache.
Only slabs might be left out of error dump if DEBUG_CAPTURE_ALL is not
set but that was already happening for i915.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27661>
Move intel_nir_lower_texture just before nir_lower_tex since we need to
operate on the offset and those are getting lowerd.
v2: (Ian)
- Rename variable name to intel_tex_options
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27447>
This allow us to invoke the quad helper.
v2: (Georg)
- Add check for is_gather_implicit_lod
Fixes: 48158636bf ("nir: add is_gather_implicit_lod")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27447>
Bspec: 56996
Programming note:
When doing cube arrays on gather4_l and gather4_b with SIMD16 or
SIMD32 the AI parameters is combined with the LOD/bias parameter on
the 9 LSBs.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27447>
On Xe2+, we need to pack LOD with array index for cube array surfaces,
with that mlod parameter gets adjusted to different indices based on the
layout.
So track if we are packing LOD with array index in fs_inst and propogate
that to sampler lowering code to adjust param location.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27447>
This fixes the off-by one mistake, we want to trim the vector till the
array index not till the coordinates last component.
v2: (Ian)
- Use tex->coord_component - 1 in nir_trim_vector
Fixes: 73a3257968 ("intel/compiler: Add texture operation lowering pass")
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27447>
When we bind a descriptor set with dynamic descriptors, we can't ignore
dynamic descriptors in previously-bound higher descriptor sets. For
example, assume we have descriptor sets A and B, each of which has one
dynamic storage buffer, and we do:
CmdBindDescriptorSets(firstSet=1, descriptorSetCount=1, A)
CmdBindDescriptorSets(firstSet=0, descriptorSetCount=1, B)
and in the first CmdBindDescriptorSets the pipeline layout includes a
descriptor set layout compatible with B in set 0. Then, following
"Pipeline Layout Compatibility," set 0 is disturbed:
When binding a descriptor set to set number N, a previously bound
descriptor set bound with lower index M than N is disturbed if the
pipeline layouts for set M and N are not compatible for set M.
Otherwise, the bound descriptor set in M is not disturbed
When it's disturbed, it's effectively turned into a set with 1 undefined
dynamic storage buffer:
When a descriptor set is disturbed by binding descriptor sets, the
disturbed set is considered to contain undefined descriptors bound
with the same pipeline layout as the disturbing descriptor set.
This disturbed set is compatible with B, so in the second
CmdBindDescriptorSets this clause doesn't apply:
If, additionally, the previously bound descriptor set for set N was
bound using a pipeline layout not compatible for set N, then all
bindings in sets numbered greater than N are disturbed.
and A remains valid to access. The code before 88db7364 worked only if
the pipeline layout when binding B contained a descriptor layout
compatible with A in set 1, because it used the pipeline layout's total
size when allocating the internal dynamic descriptors array, but that
isn't actually a requirement, so the previous code was already broken.
After 88db7364 we only allocate as much space as required by the current
descriptors being bound, because I misread the rules here, which made it
more broken and broke 3DMark Wildlife Extreme that does something like
this.
In order to properly fix this we need to keep track of the maximum ever
seen dynamic descriptor size, similar to what we already do for
descriptor sets, and use that. We have no idea what needs to be
preserved when binding a descriptor set with dynamic descriptors, so we
have to be conservative.
Fixes: 88db7364 ("tu: Rework dynamic offset handling")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27750>
1. move feedback helpers into vn_feedback
2. rename related structs, helpers, etc
3. only recycle wait semaphores is enough for the submission. Later we
can further optimize to only recycle each timeline sempahore once
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27758>
No behavior change, and below is the summary:
1. simplify to drop _timeline_ from semaphore feedback naming
2. update feedback structs to use obj_handle naming
3. for vn_feedback_cmd_pool, use fb_cmd_pool variable naming
4. for vn_feedback_buffer, use fb_buf variable naming
5. for query_feedback_cmd, use qfb_cmd variable naming (already use ffb)
6. s/submit_batches2/submit2_batches/
7. s/cmd_buffer_count/cmd_count/
8. use total_cmd_size instead of cmd_buffer_size if applicable
9. update vn_queue_submission's feedback_cmd_count to cmd_count
10. update setup time local feedback_cmd_count to extra_cmd_count
11. update feedback_event_cmd to event_feedback_cmd
12. other trivial renames
Most semaphore and query feedback cmd renamings are deferred to later
commits.
Signed-off-by: Yiwei Zhang <zzyiwei@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/27758>
All the workarounds are relatively small, so keep them in a single file.
Promote (or add) them to a separate file if they get large -- like it is
done for opt and lower.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26887>
Remove references to the workaround number from the callsites. Instead
the function has "workaround" as part of the name and the number is
in its definition. Return bool for consistency with other passes.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26887>
Rename to workaround_memory_fence_before_eot and return the already
present progress value for consistency.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/26887>
