Gallium historically has treated pipeline statistics queries as a single
query, PIPE_QUERY_PIPELINE_STATISTICS, which returns a block of 11
values. This was originally patterned after the D3D1x API. Much later,
Brian introduced an OpenGL extension that exposed these counters - but
it exposes 11 separate queries, each of which returns a single value.
Today, st/mesa simply queries all 11 values, and returns a single value.
While pipeline statistics counters aren't typically performance
critical, this is still not a great fit. A D3D1x->GL translator might
request all 11 counters by creating 11 separate GL queries...which
Gallium would map to reads of all 11 values each time, resulting in a
total 121 counter reads. That's not ideal.
This patch adds a new cap, PIPE_CAP_QUERY_PIPELINE_STATISTICS_SINGLE,
and corresponding query type PIPE_QUERY_PIPELINE_STATISTICS_SINGLE.
When calling create_query(), q->index should be set to one of the
PIPE_STAT_QUERY_* enums to select a counter. Unlike the block query,
this returns the value in pipe_query_result::u64 (as it's a single
value) instead of the pipe_query_data_pipeline_statistics group.
We update st/mesa to expose ARB_pipeline_statistics_query if either
capability is set, preferring the new SINGLE variant when available.
Thanks to Roland, Ilia, and Marek for helping me sort this out.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Gallium handles pipeline statistics queries as a single query
(PIPE_QUERY_PIPELINE_STATISTICS) which returns a struct with 11 values.
Sometimes it's useful to refer to each of those values individually,
rather than as a group. To avoid hardcoding numbers, we define a new
enum for each value. Here, the name and enum value correspond to the
index in the struct pipe_query_data_pipeline_statistics result.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
ATOMFADD is a little special -- make drivers have to specify it
explicitly.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is supported by at least NVIDIA hardware, and exposeable via GL
extensions.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This new pipe cap and the new nr_samples field in pipe_surface lets a
state tracker bind a render target with a different sample count than
the resource. This allows for implementing
EXT_multisampled_render_to_texture and
EXT_multisampled_render_to_texture2.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Introduce a new driver-private transfer flag RADEON_TRANSFER_TEMPORARY
that specifies whether the caller will use buffer_unmap or not. The
default behavior is set to permanent maps, because that's what drivers
do for Gallium buffer maps.
This should eliminate the need for hacks in libdrm. Assertions are added
to catch when the buffer_unmap calls don't match the (temporary)
buffer_map calls.
I did my best to update r600 for consistency (r300 needs no changes
because it never calls buffer_unmap), even though the radeon winsys
ignores the new flag.
As an added bonus, this should actually improve the performance of
the normal fast path, because we no longer call into libdrm at all
after the first map, and there's one less atomic in the winsys itself
(there are now no atomics left in the UNSYNCHRONIZED fast path).
Cc: Leo Liu <leo.liu@amd.com>
v2:
- remove comment about visible VRAM (Marek)
- don't rely on amdgpu_bo_cpu_map doing an atomic write
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This format is needed to support EXT_texture_sRGB_R8. THe patch adds a new
format enum, the format entries in Gallium and and svga, the mapping between
sRGB and linear formats, and tests.
v2: - add mapping to linear format for PIPE_FORMATR_R8_SRGB
v3: - Add texture format to svga format table since otherwise building
mesa will fail when this driver is enabled. It was not tested
whether the extension actually works.
v4: - svga: remove the SVGA specific format definitions and table entries
and only add correct the location of PIPE_FORMAT_R8_SRGB in the
format_conversion_table (Ilia Mirkin)
- Split patch (1/2) to separate Gallium part and mesa/st part.
(Roland Scheidegger)
- Trim the commit message to only contain the relevant parts from the
split.
v5: - svga: correct location of PIPE_FORMAT_SRGB_R8 (Ilia Mirkin)
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
They're not required to be the same as the access flag on the image
unit. For hardware that does shader image lowering based on the
qualifier (Intel), it may be required for state setup.
v2: (by Kenneth Graunke, incorporating feedback from Marek Olšák)
- Reduce both access and shader_access to uint16_t to avoid making
the pipe_image_view structure larger.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Introduce a new capability for the maximum value of
pipe_vertex_element::src_offset. Initially just every driver
backend returns the value previously set from _mesa_init_constants.
So this shall end up in no functional change.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
State trackers will not use the new param directly, but will instead use
a helper in MakeCurrent that does the right thing.
v2: rework the interface
Reviewed-by: Brian Paul <brianp@vmware.com>
This moves the evergreen-specific max-sizes out as a driver-cap, so
other drivers with less strict requirements also can use hw-atomics.
Remove ssbo_atomic as it's no longer needed.
We should now be able to use hw-atomics for some stages and not for
other, if needed.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
This gets rid of a r600 specific hack in the state-tracker, and prepares
for other drivers to be able to use hw-atomics.
While we're at it, clean up some indentation in the various drivers.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Some hardware can do PIPE_TEX_WRAP_MIRROR_REPEAT but not
PIPE_TEX_WRAP_MIRROR_CLAMP and PIPE_TEX_WRAP_MIRROR_CLAMP_TO_BORDER.
Drivers for such hardware would like to advertise support for
ARB_texture_mirror_clamp_to_edge but not EXT_texture_mirror_clamp.
This commit adds a new PIPE_CAP_TEXTURE_MIRROR_CLAMP_TO_EDGE bit,
changes the extension enable to be based on that, and enables it
in all upstream drivers which supported PIPE_CAP_TEXTURE_MIRROR_CLAMP
(so they continue supporting this mode).
This commit does not add support for the opcodes in gallivm or tgsi_to_nir.c
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
v1 -> v2:
- nv30 is _NOT_ scalar as suggested by Ilia Mirkin.
- Change from a screen cap to a shader cap as suggested
by Eric Anholt.
- radeonsi is scalar as suggested by Marek Olšák.
- Change missing ones to be scalar.
v2 -> v3:
- r600 prefers vec4 as suggested by Marek Olšák.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com> (v2)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v2)
This just renames this as we want to add an shm handle which
isn't really drm related.
Originally by: Marc-André Lureau <marcandre.lureau@gmail.com>
(airlied: I used this sed script instead)
This was generated with:
git grep -l 'DRM_API_' | xargs sed -i 's/DRM_API_/WINSYS_/g'
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Some state trackers require 128.
(There are no plans to increase PIPE_MAX_SAMPLERS too, since with gl
state tracker it's unlikely more than 32 will be needed, if you need
more use bindless.)
Nobody queries these and nobody sets them to anything useful,
the docs say TODO.
Drop them until a use appears.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The VC5 HW puts A in the low bits and R in the high bits. We can't just
swizzle in the shaders because the blending HW can't pick what channel A
is in, so make a new format to match it.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Calling this function will emit a fence signal operation into the
GPU's command stream.
v2: documentation typos
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Denotes that a fd is backed by a synobj. For example, radv shared
semaphores.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
An fd can potentially have different types of objects backing it.
Specifying the type helps us make sure we treat the FD correctly.
This is in preparation to allow importing syncobj fence FDs in addition
to native sync FDs.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
