This shifts all indirect draws to go through the new function. If the
driver doesn't have support for multi draws, we break those up and
perform N draws. Otherwise, we pass everything through for just a single
draw call.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This makes it possible to support indirect multidraws as well as having
the number of such draws to come from a separate GPU resource.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
All indirect draws are passed to the new draw function. By default
there's a fallback implementation which pipes it right back to
draw_prims, but eventually both the fallback and draw_prim's support for
indirect drawing should be removed.
This should allow a backend to properly support ARB_multi_draw_indirect
and ARB_indirect_parameters.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The sse path was pretty much disabled for practical purposes because the
largest allowed fb size was 128x128. So, adapt it for 64bit plane calculations.
This is actually not that difficult, though a problem is that we can't do
a signed 32x32->64bit mul, only unsigned, so need to fix that up. Overall,
the code still looks reasonable, though it's not like changes there in
setup really make much of a difference in the end...
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
eo, just like dcdx and dcdy, cannot overflow 32bit.
Store it as unsigned though just in case (it cannot be negative, but
in theory twice as big as dcdx or dcdy so this gives it one more bit).
This doesn't really change anything, albeit it might help minimally on
32bit archs.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Back in the day (before 24678700ed) the values
were not actually in a struct but even then I can't see why we didn't simply
align the values. Especially since it's trivial to do so.
(Not that it actually matters since the code is pretty much unused for now.)
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Otherwise, clipped lines would have undefined stippling reset bit if line
stippling is enabled.
(Untested, and I just assume copying over the bits from the original line
is actually the right thing to do.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
The unfilled stage was not filling in the prim header, and the line stage
then decided to reset the stipple counter or not based on the uninitialized
data. This causes some failures in conform linestipple test (albeit quite
randomly happening depending on environment).
So fill in the prim header in the unfilled stage - I am not entirely sure
if anybody really needs determinant after that stage, but there's at least
later stages (wide line for instance) which copy over the determinant as well.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This was added in 54f583a20 since then error handling has improved.
The test this was added to fix now fails earlier since 01822706ec
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is more future-proof, plugs the memory leak of Label and properly
destroys the buffer mutex.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is more future-proof, plugs the memory leak of Label and properly
destroys the buffer mutex.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This is more future-proof, plugs the memory leak of Label and properly
destroys the buffer mutex.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
gl_buffer_object has grown more complicated and requires cleanup. Using this
function from drivers will be more future-proof.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0 11.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In lp_build_conv() and lp_build_conv_auto(), there is a special case of
conversion when sse2 is present. That code path is suitable without any
changes to altivec, because all the functions that are called in that
code path already support altivec.
This patch increase the FPS in POWER arch across the board
between 10%-25%
I checked ipers, glxgears, glxspheres64, openarena, xonotic and glmark2.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
The function will be extended to dump all binaries shaders will consist of,
so si_shader* makes sense here.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Eventually, I'd like to dump stats for several combined binaries, which is
why you don't see a binary parameter in si_shader_dump_stats
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
We won't compile shaders in draw calls, but we will concatenate shader
binaries according to states in draw calls, so keep the binaries.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
There will be 1 config per variant, which will be a union of configs
from {prolog, main, epilog}. For now, just add the structure.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This doesn't fix a known bug, but better safe than sorry.
Also, simplify the expression in si_shader.c.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
because the API pixel shader binary will not emulate alpha test one day,
so the KILL_ENABLE bit must be determined elsewhere.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
vector_insert takes a vector, a scalar location, and a scalar value,
and produces a new vector with that component updated. As such, it
can't be vectorized properly.
vector_extract takes a vector and a scalar location, and returns
that scalar component of the vector. Vectorization doesn't really
make any sense.
Treating both as horizontal operations makes sure the vectorizer
won't try to touch these.
Found by inspection.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This makes it more similar to llvmpipe. It also allows us to let draw emit
code handle things like getting zeros for non-existing vs outputs
automatically. There probably isn't really any overhead either way, there isn't
really any "simply copy everything" code in the emit path it would copy each
attrib individually just the same. Likewise, we still do another mapping step
in softpipe as the layout may still not match exactly (same as in llvmpipe,
should probably nuke the pointless mapping in both drivers).
This fixes the piglit arb_fragment_layer_viewport no_gs/no_write tests.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
They can't actually be 0 (as position is there) but should avoid confusion.
This was supposed to have been done by af7ba989fb
but I accidentally pushed an older version of the patch in the end...
Also prettify slightly. And make some notes about the confusing and useless
fs input "map".
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
draw emit couldn't care less what the interpolation mode is...
This somehow looked like it would matter, all drivers more or less
dutifully filled that in correctly. But this is only used for emit,
if draw needs to know about interpolation mode (for clipping for instance)
it will get that information from the vs anyway.
softpipe actually used to depend on that interpolation parameter, as it
abused that structure quite a bit but no longer.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
softpipe would calculate two "vertex layouts". The second one was however
just used for internal purposes, draw would know nothing about it even though
it looked exactly the same as the other one we tell draw about.
So, store that information separately as this was just confusing.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Unlike llvmpipe, softpipe always tells draw to emit the vertices as-is.
The two vertex layouts it calculates are a bit confusing, one which is just
used to tell draw to emit vertices as-is, and the other which has draw written
all over it but draw is completely unaware of and is used only to look up the
correct interpolation info later in setup.
Thus, the slots used are different to what llvmpipe does (I'm going to clean
up the confusing two layout stuff).
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
It was actually slightly buggy (missing initialization / setup not dependent
on new vs albeit I didn't see issues), but the case of non-existing attributes
is now handled by draw emit code so don't need that anymore.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
