If you want to keep it for your driver, please raise your hand.
The prefix will probably have to be added into the driver instead of here.
I cringe when I look at my long renderer string:
Gallium 0.4 on AMD Radeon R9 Fury Series (DRM 3.17.0 / 4.11.0-staging-01277-gab25a9e, LLVM 5.0.0)
I'm sincerely sorry for all apps that detect Mesa by expecting "Gallium"
in the string.
Reviewed-by: Eric Anholt <eric@anholt.net>
This fixes both Europa Universalis IV and Stellaris rendering on i965.
This was tested on SKL.
This fix was discovered by Jakub Szuppe at Stream HPC
(https://streamhpc.com/).
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96958
bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95530
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
The current implementation assumed that these were replaced in GLSL >= 4.10
by gl_Max{Vertex,Fragment}UniformVectors, however this is not true: both
built-ins should be produced from GLSL 4.10 onwards.
This was raised by new CTS tests that are in development.
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This fixes a bug when lowering ballotARB: previously, using writemask 0xf,
emit_asm would create TGSI_OPCODE_BALLOT instructions that span two registers
to cover 4 64-bit channels. This could trample over other a neighbouring
temporary.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101360
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
st/mesa creates a surface that reinterprets the compressed blocks as
RGBA16UI or RGBA32UI. We have to adjust width0 & height0 accordingly to
avoid out-of-bounds memory accesses by CB.
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The very last entry in the sid_strings_offsets table ended up missing,
leading to out-of-bounds reads and potential crashes.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
We were exposing 4096, but we can do up to 8192 in Gen4-6 and up to
16384 in gen7+. OpenGL 4.1+ requires at least 16384.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Similar to _mesa_uniform() except that we have to call
validate_uniform_parameters() instead of validate_uniform().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
It would be nice to have a no_error path for
_mesa_test_texobj_completeness() because this function doesn't
only test if the texture is complete.
Anyway, that seems enough for now and a bunch of checks are
skipped with this patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This is done by introducing a separate list.
si_decompress_textures() is now 5x faster.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Useful for debugging performance issues when ARB_bindless_texture
is enabled. This query doesn't make a distinction between texture
and image handles.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Effectively there is the same code twice, once for depth and
again for stencil.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
In brw_workaround_depthstencil_alignment() corresponding
renderbuffers are always set to refer to the same temp miptrees.
There is no need to carry them in context.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
There is no separate stencil on gen < 6.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
In case of gen < 6 stencil (if present) is always combined with
depth. Both stencil and depth attachments point to the same
physical surface.
Alignment workaround starts by considering depth and updates
stencil accordingly. Current logic continues with stencil and
in vain considers the case where depth would refer to different
surface than stencil.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Separate stencil and hiz are only enabled for gen6+.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Headers are required only when building with OpenCL. As we're building
w/o it libelf may be missing, hence we'll error out as below:
src/gallium/drivers/r600/evergreen_compute.c:27:10:
fatal error: 'gelf.h' file not found
^
1 error generated.
Fixes: d96a210842 ("r600g,compute: provide local copy of functions from
ac_binary.c")
Reviewed-by: Jan Vesely <jan.vesely@rutgers.edu>
Reported-by: Mauro Rossi <issor.oruam@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
The header embeds the struct so it needs the header inclusion instead of
the dummy forward declaration.
Cc: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Tom Stellard <tstellar@redhat.com>
Fixes: 32206c5e56 ("radeonsi: Add radeon_shader_binary member to struct
si_shader")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Those are used by r600 and radeonsi, so moving them within the former
was a bad idea.
Fixes: d96a210842 ("r600g,compute: provide local copy of functions
from ac_binary.c")
Cc: Jan Vesely <jan.vesely@rutgers.edu>
Cc: Aaron Watry <awatry@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The commit did not add the relevant includes - in particular
stdint.h and stdbool.h for the respective standard types.
At the same time, the amdgpu_device_handle typedef redeclaration was
off.
Fixes: 81945ded0d ("ac: remove amdgpu.h dependency")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101471
Cc: Mark Janes <mark.a.janes@intel.com>
Cc: Gregor Münch <gr.muench@gmail.com>
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reported-by: Mark Janes <mark.a.janes@intel.com>
Reported-by: Gregor Münch <gr.muench@gmail.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Current version fails to set depthstencil.depth_offset when there
is only stencil attachment (it does set the intra tile offsets
though). Fixes piglits:
g45,g965,ilk: depthstencil-render-miplevels 1024 s=z24_s8
g45,ilk: depthstencil-render-miplevels 273 s=z24_s8
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
In intel_hiz_miptree_buf_create() the miptree is unconditionally
created with MIPTREE_LAYOUT_FORCE_ALL_SLICE_AT_LOD.
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This patch finishes the work done by Ken of converting SF_STATE to genxml, and
merges it with gen6+ code for emitting that state.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This fixes code generation on gen45.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Rename "Use Point Width State" to "Point Width Source". It accepts the same
values and has the same meaning as gen6+, so lets keep them with the same name
to simplify the code.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It seems that it was never set correctly.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Binner/clipper read viewport array index from the vertex header as needed.
Move viewport state to BACKEND_STATE.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
The last FE stage can emit render target array index. Currently we only
check to see if GS is emitting it. Moved the state to BACKEND_STATE and
plumbed the driver to set it.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
