For samplers the type_size() callback can return 0, which triggers
a NIR validation error.
In this case set range to ~0 which means the range is unknown.
Acked-by: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36263>
VCN1 doesn't have FW interface to enable cu_qp_delta with rate control
disabled, which means we can only support either rate control enabled or
disabled. Spec requires VK_VIDEO_ENCODE_RATE_CONTROL_MODE_DISABLED_BIT_KHR
to always be supported, thus the rate control modes needs to be disabled
on VCN1.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36353>
These params can change per frame, so we need to send the values
to firmware on every frame instead of only once at session init.
Cc: mesa-stable
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36353>
Check if the profile is supported. Only return one format that
is supported by all requested profiles. Return error if the
requested profiles can't share the same format.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36311>
Xe2 adds two more flags registers. We barely use the second flags
register on previous platforms, so the omission was not previously
noticed.
There are several efforts in progress that will add using of more flags
registers.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35415>
At this point, using the per-register granularity will only help in
conjuction with fragment shader discard (which is implemented using f1).
v2: Loop restructuring and code cleanups. Suggested by Curro.
v3: Only apply Wa on Gfx12.5+. Suggested by Curro.
v4: Also apply to implicit flag reads. Suggested by Curro. This version
affects a *lot* more shaders (10,936 on Meteor Lake shader-db versus
4,482 before). The results are still very much in the 🤷 territory.
v5: Add missing dependency. I thought I got them all the previous
time. :( Noticed by Curro.
shader-db:
Lunar Lake
total cycles in shared programs: 886315282 -> 886391040 (<.01%)
cycles in affected programs: 204907250 -> 204983008 (0.04%)
helped: 1 / HURT: 6716
LOST: 0
GAINED: 1
Meteor Lake and DG2 had similar results. (Meteor Lake shown)
total cycles in shared programs: 883774789 -> 883921507 (0.02%)
cycles in affected programs: 481836784 -> 481983502 (0.03%)
helped: 4 / HURT: 10936
LOST: 3
GAINED: 7
fossil-db:
Lunar Lake
Totals:
Cycle count: 32600441334 -> 32601862658 (+0.00%); split: -0.00%, +0.00%
Totals from 90283 (11.44% of 789260) affected shaders:
Cycle count: 17265933202 -> 17267354526 (+0.01%); split: -0.00%, +0.01%
Meteor Lake and DG2 had similar results. (Meteor Lake shown)
Totals:
Cycle count: 26477292677 -> 26480321805 (+0.01%); split: -0.00%, +0.01%
Max dispatch width: 8010440 -> 8010984 (+0.01%)
Totals from 132952 (14.71% of 903925) affected shaders:
Cycle count: 15349555348 -> 15352584476 (+0.02%); split: -0.00%, +0.02%
Max dispatch width: 1085416 -> 1085960 (+0.05%)
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35415>
After commit "vulkan: don't destroy vk_sync_timeline if a point is
still pending", dEQP-VK.synchronization*.timeline_semaphore.* is
no longer hurting other tests.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35921>
Currently, vk_sync_timeline_wait() may report idle while we still have
time points outstanding in vk_queue. This race between vk_sync_timeline
and vk_queue is problematic as vk_queue_submit_cleanup() can end-up
trying to unref a timeline point that was already destroyed in
vk_sync_timeline_finish(), leading to an use-after-free.
Address this race-condition by introducing a reference counter to the
timeline. Each timeline point takes a reference to the timeline when
it's checked out and drops the reference when it's freed. Now, the
timeline is only destroyed when all the references had been dropped.
To guarantee that all references will be dropped and the timeline will
be destroyed, vk_sync_timeline_finish() waits for all pending points
to be checked out.
This commit fixes several Mesa CI flakes in v3dv related to timeline
semaphores.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12648
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35921>
Previously, we had a sort of double reference count with refcount being
used to track how many waits were holding a reference and pending being
used to track whether or not it was in the pending list. This meant
that the unref operation actually had to look at both refcount and
pending in order to determine if it could free the time point. This is
way too confusing. Instead, we should just always take a reference
while we're pending.
This also simplifies the over-all interface because there's no longer a
difference between free and release. `struct vk_sync_timeline_point` is
now just a reference-counted API.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35921>
Whenever we assume the timeline state is locked, we use _locked, pass in
the timeline state explicitly, and rename it so it's clearly an action
which the timeline does on the point. This makes it far more clear who
owns a reference to what and where.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35921>
The lifetime of `struct vk_sync_timeline` is tied to the lifetime of
`vk_fence` or `vk_semaphore` objects. To better manage this lifecycle,
create a wrapper struct `vk_sync_timeline_state` that contains the
timeline state and is dynamically allocated when the timeline is
initialized. This separation allows the timeline state to persist
independently of the sync object lifecycle.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/35921>
This creates a concept of "peripheral" for Rust crates housed in
Mesa, and "unofficially" uploaded to crates.io by subcommunities
of Mesa. This is modeled on LLVM's peripheral versus core
support concept:
https://llvm.org/docs/SupportPolicy.html
This allows use of the mesa3d_util crate without vendoring it.
This is a desire of the crosvm maintainers (crrev.com/c/6594760).
This also formally defines CODEOWNERS to be the projected uploaders
of the mesa3d_util crate. Everyone of course is encouraged to make
changes, but that just gives us a heads-up to update the downstream
imports of mesa3d_util.
The Cargo.toml file is not added here, since Meson is the only
officially supported build system of the Mesa3D project.
Reviewed-by: Marcin Radomski <dextero@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36276>
The header says:
enum ADataSpace AHardwareBuffer_getDataSpace(const AHardwareBuffer* _Nonnull buffer)
__INTRODUCED_IN(__ANDROID_API_V__);
which is API level 35.
Reviewed-by: Jason Macnak <jmacnak@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36338>
`bm-init.sh` executes `init-stage1.sh` and then an `export`, but the
latter command overwrite the exit code `$?`, so we need to put the first
exit code into a variable.
Signed-off-by: Guilherme Gallo <guilherme.gallo@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36356>
This traces back to c688f8f8c5, but the
shape of the fix would be different if against that. So we do the
optimal for the current code flow and only port to stable.
Cc: mesa-stable
Reviewed-by: Lucas Fryzek <lfryzek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36335>
Add lvp_image_bind helper so that bind status is robustly handled
outside the core bind, which simplifies the exit paths. Meanwhile, the
spec doesn't require to proceed binding of image internal planes if a
prior plane binding has failed. So this change further simplifies the
non-disjoint image binding result handling.
Reviewed-by: Lucas Fryzek <lfryzek@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/36335>
