Other places will need to do this soon to properly handle source
swizzles. The patch looks a little odd, but the change is pretty
straight forward. All of the swizzle and mask handling is moved out,
but the code for handling move instructions and vecN instructions
remains in nir_emit_alu.
I'm not terribly pleased with the "need_dest" parameter, but
get_nir_dest is (somewhat surprisingly) destructive. I am open to
suggestions of alternatives.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
To allow cmod propagation from a MOV in a sequence like:
and(16) g31<1>UD g20<8,8,1>UD g22<8,8,1>UD
mov.nz.f0(16) null<1>F g31<8,8,1>D
A similar change to the vec4 backend had no effect.
Somewhere between c1ec582059 and 40fc4b5acd (1,094 commits) the
effectiveness of this patch diminished, and as of commit d7e0d47b9d
(nir: Add a bunch of b2[if] optimizations) this optimization no longer
has any effect on any platform.
A later patch "intel/fs: Use De Morgan's laws to avoid logical-not of a
logic result on Gen8+," generates some instruction sequences that
require this change in order for cmod propagation to make progress.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The scalar back-end uses SHADER_OPCODE_SEND for all surface messages so
we no longer need the non-logical opcodes there. Prefix them VEC4 so
it's clear that they're only used by the vec4 back-end.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The unused typed surface read/write support in the vec4 back-end has
been dropped and the fs back-end now uses SHADER_OPCODE_SEND for all
image and buffer ops. There's no reason to keep these opcodes around
anymore.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Since switching to SHADER_OPCODE_SEND for image operations, we no longer
need the non-logical opcode.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
All of the actual abstraction (except possibly setting size_written)
happens as part of the logical opcodes. The only thing that the surface
builder is providing at this point is extra levels of functions to call
through. I'm going to be adding bindless image support soon and all the
extra abstraction here is just getting in the way.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It makes more sense to start at the surface then move on to the address
and then the data. Also, this is a really good test of whether or not
we got all the places that use the sources by explicit integer number.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The optimization in 4cd1a0be76 introduced a replacement of :
cmp(8).z.f0.0 vgrf11.y:D, vgrf10.xxxx:D, vgrf2.xyyy:D
...
cmp(8).nz.f0.0 null.x:D, vgrf11.yyyy:D, 0D
By :
cmp(8).z.f0.0 vgrf15.x:D, vgrf10.xxxx:D, vgrf2.yyyy:D
...
mov(8) vgrf11.y:D, vgrf15.yyyy:D
The first cmp instruction is storing in x while the second mov is
sourcing from y. We need to take into account where the replacement on
the scan_inst destination is going to store thing so that the
replacement mov can source things from the correct location.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 4cd1a0be76 ("i965/vec4: Propagate conditional modifiers from more compares to other compares")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109759
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Add support to the i965 DRI driver to sample from XYUV8888 buffers.
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
For split indirect sends we have to put the EOT parameter in the
extended descriptor as well as the instruction itself so just calling
brw_inst_set_eot is insufficient. Moving the EOT handling handling into
the send_indirect_[split]_message helper lets us handle it properly.
Even though the hardware spec claims that any "integer DWord multiply"
operation is affected by the regioning restrictions of CHV/BXT/GLK,
this is inconsistent with the behavior of the simulator and with
empirical evidence -- Return false from has_dst_aligned_region_restriction()
for such instructions as a micro-optimization.
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Strides up to 32B can be implemented for the source regions of most
instructions by leveraging either the vertical or the horizontal
stride of the hardware Align1 region. The main motivation for this is
that currently the lower_integer_multiplication() pass will happily
double the stride of one of the 32-bit sources, which can blow up if
the stride of the original source was already the maximum value
allowed by the hardware.
An alternative would be to use the regioning legalization pass in
order to lower such strides into the composition of multiple legal
strides, but that would be somewhat less efficient.
This showed up as a regression from my commit cbea91eb57
in Vulkan 1.1 CTS tests on CHV/BXT platforms, however it was really a
pre-existing problem that had affected conformance on other platforms
without native support for integer multiplication. CHV/BXT were
getting around it because the code I removed in that commit had the
"fortunate" side effect of emitting narrower regions that didn't hit
the hardware stride limit after lowering. Beyond fixing the
regression this fixes ~90 additional Vulkan 1.1 subgroup CTS tests on
ICL (that's why this patch is marked for inclusion in mesa-stable even
though the original regressing patch was not).
According to Jason, a nearly equivalent change had been committed
previously as e8c9e65185 and then (mistakenly?) reverted as
a31d038208.
Cc: mesa-stable@lists.freedesktop.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109328
Reported-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This is required in combination with the following commit, because
otherwise if a source region with an extended 8+ stride is present in
the instruction (which we're about to declare legal) we'll end up
emitting code that attempts to write to such a region, even though
strides greater than four are still illegal for the destination.
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Because the "low" temporary needs to be accessed with word type and
twice the original stride, attempting to preserve the alignment of the
original destination can potentially lead to instructions with illegal
destination stride greater than four. Because the CHV/BXT alignment
restrictions are now being enforced by the regioning lowering pass run
after lower_integer_multiplication(), there is no real need to
preserve the original strides anymore.
Note that this bug can be reproduced on stable branches, but
back-porting would be non-trivial, because the fix relies on the
regioning lowering pass recently introduced.
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently the execution type calculation will return a bogus value in
cases like:
mov_indirect(8) vgrf0:w, vgrf1:w, vgrf2:ud, 32u
Which will be considered to have a 32-bit integer execution type even
though the actual indirect move operation will be carried out with
16-bit precision.
Similarly there's no need to apply the CHV/BXT double-precision region
alignment restrictions to such control sources, since they aren't
directly involved in the double-precision arithmetic operations
emitted by these virtual instructions. Applying the CHV/BXT
restrictions to control sources was expected to be harmless if mildly
inefficient, but unfortunately it exposed problems at codegen level
for virtual instructions (namely the SHUFFLE instruction used for the
Vulkan 1.1 subgroup feature) that weren't prepared to accept control
sources with an arbitrary strided region.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109328
Reported-by: Mark Janes <mark.a.janes@intel.com>
Fixes: efa4e4bc5f "intel/fs: Introduce regioning lowering pass."
Tested-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2 (idr): Move adding the test to after adding the fix. Reordering the
two commits prevents possible headaches for git-bisect with scripts that
always do 'ninja check'.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109404
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
v2: Fix silly bug in logic. s/||/&&/
All but one of the affected shaders is in an Unreal4 demo. The other is
in Tomb Raider. All of the cases that Ian investigated appear to be
sequences like the following
if (int(uint(some_float)) < 0) /* other relations too */
...
At least in Tomb Raider, it's not obvious that this sequence came from
the original shader.
In some of the Unreal demos, the shader contains code like
if (int(uint(textureLod(...))) > 0)
...
which explicitly generates the offending sequence.
All Gen6+ platforms had similar results (Skylake shown):
total instructions in shared programs: 15437170 -> 15437187 (<.01%)
instructions in affected programs: 4492 -> 4509 (0.38%)
helped: 0
HURT: 17
HURT stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel) min: 0.05% max: 0.73% x̄: 0.66% x̃: 0.73%
95% mean confidence interval for instructions value: 1.00 1.00
95% mean confidence interval for instructions %-change: 0.57% 0.75%
Instructions are HURT.
total cycles in shared programs: 383007996 -> 383007992 (<.01%)
cycles in affected programs: 20542 -> 20538 (-0.02%)
helped: 6
HURT: 7
helped stats (abs) min: 2 max: 6 x̄: 5.33 x̃: 6
helped stats (rel) min: 0.11% max: 0.36% x̄: 0.32% x̃: 0.36%
HURT stats (abs) min: 4 max: 4 x̄: 4.00 x̃: 4
HURT stats (rel) min: 0.27% max: 0.27% x̄: 0.27% x̃: 0.27%
95% mean confidence interval for cycles value: -3.30 2.69
95% mean confidence interval for cycles %-change: -0.19% 0.19%
Inconclusive result (value mean confidence interval includes 0).
No changes on Iron Lake or GM45.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109404
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: nagrigoriadis@gmail.com
Tested-by: Danylo Piliaiev <danylo.piliaiev@gmail.com>
We emit an FBL instruction which only exists since Gen7. This prevents
the test from segfaulting when run with TEST_DEBUG=1.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This fixes a bug in runscape where we were optimizing x >> 16 to an
extract and then negating and converting to float. The NIR to fs pass
was dropping the negate on the floor breaking a geometry shader and
causing it to render nothing.
Fixes: 1f862e923c "i965/fs: Optimize float conversions of byte/word..."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109601
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Drops one instruction from fs-sign-int.shader_test. No change in
shader-db due to it having 0 instances of sign(genIType). This may hurt
isign64 if algebraic runs before int64 lowering, but I wasn't sure how to
mark the algebraic opt as "every bit size but 64".
v2: Update commit message about shader-db.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Patch propagates given scale_factors to lowering options.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It's more clear and means we don't have to update the array every time
we add an optional texture instruction argument
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The sampler will be ignored since the underlying 'ld_mcs' operation
won't use it, so just fill the field with 0 instead of the texture to
make it clearer that's the case.
This will also avoid is_high_sampler() to kick in unnecessarily, in
case we are using the operation for a texture with index >= 16.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For some reason, this warning only occurs for me in release builds.
In file included from src/intel/compiler/brw_nir_lower_mem_access_bit_sizes.c:25:0:
src/intel/compiler/brw_nir_lower_mem_access_bit_sizes.c: In function ‘brw_nir_lower_mem_access_bit_sizes’:
src/compiler/nir/nir_builder.h:501:26: warning: ‘src_swiz[2]’ may be used uninitialized in this function [-Wmaybe-uninitialized]
alu_src.swizzle[i] = swiz[i];
~~~~~~~~~~~~~~~~~~~^~~~~~~~~
src/intel/compiler/brw_nir_lower_mem_access_bit_sizes.c:225:16: note: ‘src_swiz[2]’ was declared here
unsigned src_swiz[4];
^~~~~~~~
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Previously, we only applied the fix to shaders with a dispatch mode of
SIMD8 but the code it relies on for SIMD16 mode only applies to SIMD16
instructions. If you have a SIMD8 instruction in a SIMD16 shader,
neither would trigger and the restriction could still be hit.
Fixes: 232ed89802 "i965/fs: Register allocator shoudn't use grf127..."
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
By just assigning dst.type to src[i].type, we ensure that the offset at
the end of the loop actually offsets it by the right number of
registers. Otherwise, we'll get into a case where we copy with a Q type
and then offset with a D type and things get out of sync.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Previously, we tried to combine all cases where the instruction being
CSE'd writes to more than one MOV worth of registers into one case with
a bit of special casing for LOAD_PAYLOAD. This commit splits things so
that LOAD_PAYLOAD is entirely it's own case. This makes tweaking the
LOAD_PAYLOAD case simpler in the next commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Missing check for shader stage in the fs_visitor would corrupt the
cs_prog_data.push information and trigger crashes / corruption later
when uploading the CS state.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Surface reads don't need them because they just have the one address
payload. With surface writes, on the other hand, we can put the address
and the data in the different halves and avoid building the payload all
together.
The decrease in register pressure and added freedom in register
allocation resulting from this change reduces spilling enough to improve
the performance of one customer benchmark by about 2x.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We're about to add some more if cases so let's have the giant re-indent
in it's own patch to make review easier.
Acked-by: Iago Toral Quiroga <itoral@igalia.com>
These have clearly never seen any use.... On gen8, the bottom 4 bits are
missing so we need to shift them off before we call set_bits and shift
again when we get the bits. Found by inspection.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Instead of fetching the information out of the instruction directly,
fetch the descriptor and then pluck the information out of the
descriptor. The current scheme works ok for SEND but with SENDS, it all
falls to pieces because the descriptor is completely shuffled around.
This commit doesn't actually convert everything. One notable exception
is URB messages which don't even use descriptors in emit_urb_WRITE yet.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
We want to be able to extract data from descriptors as well as unify a
bit of the descriptor construction.
One of the unifications we do is to unify the read/write and dataport
descriptors. On gen4-5, read/write are substantially different and the
read descriptors change between gen4 and gen4.x. On gen6, they unified
layouts between read, write, and dataport. Then, on gen8, they added
one bit to the message type field but left it reserved MBZ for
read/write messages. This commit chooses to treat that as if they
expanded the field everywhere and just didn't have enough enum values
for read/write to bother with the extra bit.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
