This only appears to happen on Raven2.
Possible way to reproduce:
resource_get_handle(WINSYS_HANDLE_TYPE_KMS) --> sets is_shared = true
resource_get_handle(WINSYS_HANDLE_TYPE_DMABUF) --> fail
Cc: 19.1 19.2 <mesa-stable@lists.freedesktop.org>
Starting with HALTI2 the RS supports 64bpp clears.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Update to etna_viv commit c51353e.
Signed-off-by: Christian GMEINER <christian.GMEINER@bachmann.info>
Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
This shrinks the table, avoids needing to update the table with NULL
entries on every MESA_FORMAT addition, and removes a surprising,
non-unit-tested format number ordering dependency.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Now that SVGA doesn't have a table that has to be in PIPE_FORMAT
order, we can let the enums have whatever values they naturally would
without worrying about holes.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Now that we're using the array initializers, we don't need to manually
fill out all these stub entries.
Produced with "sed -i '/.*INVALID.*INVALID.*INVALID/d'
src/gallium/drivers/svga/svga_format.c"
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
By using the [ ] = {} array initializer syntax, we no longer need the
entries to be listed in PIPE_FORMAT_* value order. This means that
people adding new gallium formats don't need to cargo-cult changes to
this driver or regress that non-unit-tested requirement.
While I'm here, drop the lines for formats that no longer exist (the
numbered ones in the table).
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Seemed like a sensible cleanup, while I was looking at whether I could
make the table sparse.
To make the svga table not require fixups on every new gallium format,
we may want to change how it's populated.
Acked-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Rather than using a regalloc based on live internals, computed hastily
with repeated invocations of a forward-analysis pass, we switch to
compute liveness information on a per-block basis.
Within a given basic block, we compute liveness backwards with a
linear-time algorithm; for common shaders, this may help RA terminate
quicker.
Across blocks, we use a work list (really a work set) and check if we're
making progress. This isn't terribly efficient, but it gets the job
done. Point is, we get the live_in/live_out for each block.
From there, it's simple to rerun the linear-time update algorithm to
compute the interference graph.
The benefit of this technique is the ability to ignore "gaps" in
liveness across intermediate blocks that are never executed. On simple
shaders like the loops in glmark, this results in a minor reduction in
register pressure. The motivation was a complex shader in Krita that
failed register allocation due to an unfortunate interaction between
texture pipeline registers and control flow. This shader now compiles
successfully.
total instructions in shared programs: 3439 -> 3438 (-0.03%)
instructions in affected programs: 22 -> 21 (-4.55%)
helped: 1
HURT: 0
total bundles in shared programs: 2077 -> 2076 (-0.05%)
bundles in affected programs: 12 -> 11 (-8.33%)
helped: 1
HURT: 0
total quadwords in shared programs: 3457 -> 3456 (-0.03%)
quadwords in affected programs: 20 -> 19 (-5.00%)
helped: 1
HURT: 0
total registers in shared programs: 341 -> 338 (-0.88%)
registers in affected programs: 9 -> 6 (-33.33%)
helped: 3
HURT: 0
helped stats (abs) min: 1 max: 1 x̄: 1.00 x̃: 1
helped stats (rel) min: 33.33% max: 33.33% x̄: 33.33% x̃: 33.33%
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
If there's a nontrivial swizzle fed into an extra (shortened) argument,
we bail on copyprop. No glmark changes (since it doesn't use fancy
texturing/loads).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
It's always been ambiguous which they are, but their primary register is
their output, not their input; therefore, they are loads.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Same issue with liveness analysis. If we store out a vec3, we should not
reference the .w component.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The texture coordinate for a 2D texture could be a vec2 or a vec3,
depending if it's an array texture or not. If it's vec2 (non-array
texture), we should not reference the z component; otherwise, liveness
analysis will get very confused when z is never written.
v2: Fix typo (Ilia).
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
If we need to lower a move for a read from a vec2 texture coordinate, we
shouldn't write zw, even incidentally.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes shaders with control flow like:
out = 0;
if (A) {
if (B)
out = texture(A, ...)
} else {
out = texture(B, ...)
}
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The exit block has been 'dangling' in the successors graph, so let's
ensure it's linked in.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
While we already compute the successors array, for backwards data flow
analysis, it is useful to walk the control flow graph backwards based on
predecessors, so let's compute that information as well.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes incremental build with Android
Signed-off-by: Roman Stratiienko <roman.stratiienko@globallogic.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This is primarily so that this build gets tested in CI and we don't
break it again.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
By adding one more helper to ac_llvm_build, we can also easily keep
vector stores together.
Fixes the
tests/spec/glsl-1.30/execution/fs-large-local-array-vec4.shader_test
piglit test.
Fixes: 74470baebb ("ac/nir: Lower large indirect variables to scratch")
Reviewed-by: Marek Olšák <marek.olsak@amd.com
PIPE_FORMAT_YV12 is not handled so switching to PIPE_FORMAT_IYUV and
adding back YVU support.
Signed-off-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
PIPE_TIMEOUT_INFINITE is unsigned and gets assigned to signed fields
where it ends up as -1. When this reaches the kernel as a timeout it
gets translated as no timeout, which cause the waiting functions to
return immediately and not actually wait for a completion.
This seems to cause unstable results with lima where even piglit tests
randomly fail.
Handle this by setting the signed max value in case of infinite timeout.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Quite useless without DCC for LAYOUT_GENERAL.
Fixes: b4dad3afaa Revert "radv: Do not decompress on LAYOUT_GENERAL."
Acked-by: Dave Airlie <airlied@redhat.com>
