Renaming makes it easier to relate a pciid with device configuration.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
From the Kaby Lake PRM Vol. 7 "Assigning Conditional Flags":
* Note that the [post condition signal] bits generated at
the output of a compute are before the .sat.
Paragraph about post_zero does not mention saturation, but
testing it on actual GPUs shows that conditional modifiers
are applied after saturation.
* post_zero bit: This bit reflects whether the final
result is zero after all the clamping, normalizing,
or format conversion logic.
For signed types we don't care about saturation: it won't
change the result of conditional modifier.
For floating and unsigned types there two special cases,
when we can remove inst even if scan_inst is saturated: G
and LE. Since conditional modifiers are just comparations
against zero, saturating positive values to the upper
limit never changes the result of comparation.
For negative values:
(sat(x) > 0) == (x > 0) --- false
(sat(x) <= 0) == (x <= 0) --- true
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2610
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4167>
If INTEL_DEBUG=no16 is used, then simd16 will not be attempted. This,
in turn prevents simd32 from running, because we attempt to skip
simd32 when simd16 fails to compile.
This change more accurately recognizes when we attempted simd16, but
simd16 failed.
One easy way to cause an issue is to set both no8 and no16. Before
this change, we would be left with no FS program, even though simd32
could still be generated in some cases.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5269>
If no16 was specified, and the shader can't run in simd8 due to the
local_size, then we need to generate a simd32 program.
If both no8 and no16 are specified, then we need to generate a simd32
program.
Rework:
* Drop update of `if` that would have changed `do32` to try simd32
even if simd16 spilled registers. (Caio)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5269>
perf_cfg is enough - it already contains almost all necessary
information and is constructed in a more optimal way (O(n) vs O(n^2)
- it uses hash table to build the unique counter list).
"Almost all", because it doesn't contain OA raw counters, but
we should have not exposed them anyway. Quoting Mark Janes:
"I see no reason to include the OA raw counters in the list that
are provided to the user. They are unusable.
The MDAPI library can be used to configure raw counters in a way
that provides esoteric metrics, but that library is written against
INTEL_performance_query."
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5399>
We generate bitfields of bits that we want to retain (mask) and bits
that we want to set (brw_mode) in the cr0 register, so the bits we want
to set should be in the set of bits we want to retain.
Also, remove the initialization of mask from
fs_visitor::emit_shader_float_controls_execution_mode since
brw_rnd_mode_from_nir initializes the mask parameter unconditionally.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5566>
This is a 64 bits value that might not be aligned on 32 bit plaforms.
Since it's used with atomics, let's make sure it gets properly aligned
to avoid any potential performance loss.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5637>
Kernel support for DG1 has not yet been merged upstream; per our
long-standing DRM subsystem policy, we should not enable the platform
in userspace until the kernel patches are merged and functional.
We will re-enable this in the future. In the meantime, we retain all
of the infrastructure and code for the platform so that we can continue
developing DG1 support in upstream.
See a discussion here:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956#note_547775
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5617>
We don't want to use it on gen5 and earlier because only RNDD can be
done with a single instruction and we can implement RNDU(x) as -RNDD(-x)
so it's better to just do that when we have the instruction. On gen6
and above, we may as well just use the right instruction.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5596>
Some day we probably want to move it out of brw_shader if we're going to
share it with IBC but that can be another day.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5596>
Reworks:
* Use device rather than physical_device for info. (Lionel)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5572>
Future (discrete) platforms won't have support for get/set tiling. This
function allows our drivers to query for that, by simply trying to get
the tiling from a dummy buffer.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956>
We don't have any URB size set in the L3 config, since it's a fixed
value now. So just return the value that we know from gen_device_info.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956>
If the platform's default L3 config is NULL, then it now gets
initialized only at context init time, and cmd_buffer_config_l3 will
always return immediately.
Rework:
* Remove unneeded check on !cfg in cmd_buffer_config_l3 (Jason)
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956>
On some gen12 platforms we will use the L3FullWayAllocationEnable and
never reconfigure the L3 setup.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956>
An example entry with URB size being 0 is in the cnl list.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4956>
Add an entry for this modifier in the modifier_info array.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5420>
Add a new aux usage which more accurately describes the behavior of
CCS_E on gen12. On this platform, writes using the 3D engine are either
compressed or substituted with fast-cleared blocks.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5363>
There's no good reason to have the "which table do I use?" code
duplicated twice. The only advantage to the way we were doing it before
was that we could move the switch statement outside the loop. If this
is ever an actual device initialization perf problem that someone cares
about, we can optimize that when the time comes. For now, the
duplicated cases are simply a platform-enabling pit-fall.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5530>
