Add new builtin parameters that are used to keep track of the group
size. This will be used to implement ARB_compute_variable_group_size.
The compiler will use the maximum group size supported to pick a
suitable SIMD variant. A later improvement will be to keep all SIMD
variants (like FS) so the driver can select the best one at dispatch
time.
When variable workgroup size is used, the small workgroup optimization
is disabled as it we can't prove at compile time that the barriers
won't be needed.
Extracted from original i965 patch with additional changes by
Caio Marcelo de Oliveira Filho.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
The push.total field had three values but only one was directly
used (size). Replace it with a helper function that explicitly takes
the cs_prog_data and the number of threads -- and use that in the
drivers.
This is a preparation for ARB_compute_variable_group_size where the
number of threads (hence the total size for push constants) is not
defined at compile time (not cs_prog_data->threads).
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>
Identify if view_index is used only for position calculation, and use
Primitive Replication to implement Multiview in Gen12. This feature
allows storing per-view position information in a single execution of
the shader, treating position as an array.
The shader is transformed by adding a for-loop around it, that have an
iteration per active view (in the view_mask). Stores to the position
now store into the position array for the current index in the loop,
and load_view_index() will return the view index corresponding to the
current index in the loop.
The feature is controlled by setting the environment variable
ANV_PRIMITIVE_REPLICATION_MAX_VIEWS, which defaults to 2 if unset.
For pipelines with view counts larger than that, the regular
instancing will be used instead of Primitive Replication. To disable
it completely set the variable to 0.
v2: Don't assume position is set in vertex shader; remove only stores
for position; don't apply optimizations since other passes will
do; clone shader body without extract/reinsert; don't use
last_block (potentially stale). (Jason)
Fix view_index immediate to contain the view index, not its order.
Check for maximum number of views supported.
Add guard for gen12.
v3: Clone the entire shader function and change it before reinsert;
disable optimization when shader has memory writes. (Jason)
Use a single environment variable with _DEBUG on the name.
v4: Change to use new nir_deref_instr.
When removing stores, look for mode nir_var_shader_out instead
of the walking the list of outputs.
Ensure unused derefs are removed in the non-position part of the
shader.
Remove dead control flow when identifying if can use or not
primitive replication.
v5: Consider all the active shaders (including fragment) when deciding
that Primitive Replication can be used.
Change environment variable to ANV_PRIMITIVE_REPLICATION.
Squash the emission of 3DSTATE_PRIMITIVE_REPLICATION into this patch.
Disable Prim Rep in blorp_exec_3d.
v6: Use a loop around the shader, instead of manually unrolling, since
the regular unroll pass will kick in.
Document that we don't expect to see copy_deref or load_deref
involving the position variable.
Recover use_primitive_replication value when loading pipeline from
the cache.
Set VARYING_SLOT_LAYER to 0 in the shader. Earlier versions were
relying on ForceZeroRTAIndexEnable but that might not be
sufficient.
Disable Prim Rep in cmd_buffer_so_memcpy.
v7: Don't use Primitive Replication if position is not set, fallback
to instancing; change environment variable to be
ANV_PRIMITVE_REPLICATION_MAX_VIEWS and default it to 2 based on
experiments.
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Change brw_compute_vue_map() to also take the number of pos slots. If
more than one slot is used, the VARYING_SLOT_POS is treated as an
array.
When using Primitive Replication, instead of a single position, the
VUE must contain an array of positions. Padding might be
necessary (after clip distance) to ensure rest of attributes start
aligned.
v2: Add note about array in the commit message and assert that
pos_slots >= 1 to make clear 0 is invalid. (Jason)
Move padding to be after the clip distance.
v3: Apply the correct offset when gathering the sources from outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
v2: Use groups for the 16-element arrays "Viewport Offset"
and "RTAI Offset". (Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
This commit enables the I/O vectorization pass that was originally
written for ACO for Intel drivers. We enable it for UBOs, SSBOs, global
memory, and SLM. We only enable vectorization for the scalar back-end
because it vec4 makes certain alignment assumptions.
Shader-db results with iris on ICL:
total instructions in shared programs: 16077927 -> 16068236 (-0.06%)
instructions in affected programs: 199839 -> 190148 (-4.85%)
helped: 324
HURT: 0
helped stats (abs) min: 2 max: 458 x̄: 29.91 x̃: 4
helped stats (rel) min: 0.11% max: 38.94% x̄: 4.32% x̃: 1.64%
95% mean confidence interval for instructions value: -37.02 -22.80
95% mean confidence interval for instructions %-change: -5.07% -3.58%
Instructions are helped.
total cycles in shared programs: 336806135 -> 336151501 (-0.19%)
cycles in affected programs: 16009735 -> 15355101 (-4.09%)
helped: 458
HURT: 154
helped stats (abs) min: 1 max: 77812 x̄: 1542.50 x̃: 75
helped stats (rel) min: <.01% max: 34.46% x̄: 5.16% x̃: 2.01%
HURT stats (abs) min: 1 max: 22800 x̄: 336.55 x̃: 20
HURT stats (rel) min: <.01% max: 17.11% x̄: 2.12% x̃: 1.00%
95% mean confidence interval for cycles value: -1596.83 -542.49
95% mean confidence interval for cycles %-change: -3.83% -2.82%
Cycles are helped.
total sends in shared programs: 814177 -> 809049 (-0.63%)
sends in affected programs: 15422 -> 10294 (-33.25%)
helped: 324
HURT: 0
helped stats (abs) min: 1 max: 256 x̄: 15.83 x̃: 2
helped stats (rel) min: 1.33% max: 67.90% x̄: 21.21% x̃: 15.38%
95% mean confidence interval for sends value: -19.67 -11.98
95% mean confidence interval for sends %-change: -23.03% -19.39%
Sends are helped.
LOST: 7
GAINED: 2
Most of the helped shaders were in the following titles:
- Doom
- Deus Ex: Mankind Divided
- Aztec Ruins
- Shadow of Mordor
- DiRT Showdown
- Tomb Raider (Rise, I think)
Five of the lost programs are SIMD16 shaders we lost from dirt showdown.
The other two are compute shaders in Aztec Ruins which switched from
SIMD8 to SIMD16.
Vulkan pipeline-db stats on ICL:
Instructions in all programs: 296780486 -> 293493363 (-1.1%)
Loops in all programs: 149669 -> 149669 (+0.0%)
Cycles in all programs: 90999206722 -> 88513844563 (-2.7%)
Spills in all programs: 1710217 -> 1730691 (+1.2%)
Fills in all programs: 1931235 -> 1958138 (+1.4%)
By far the most help was in the Tomb Raider games. A couple of Batman
games with DXVK were also helped. In Shadow of the Tomb Raider:
Instructions in all programs: 41614336 -> 39408023 (-5.3%)
Loops in all programs: 32200 -> 32200 (+0.0%)
Cycles in all programs: 1875498485 -> 1667034831 (-11.1%)
Spills in all programs: 196307 -> 214945 (+9.5%)
Fills in all programs: 282736 -> 307113 (+8.6%)
Benchmarks of real games I've done on this patch:
- Rise of the Tomb Raider: +3%
- Shadow of the Tomb Raider: +10%
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4367>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4367>
We're about to do load/store vectorization right before this but we need
that to happen after we've done a round of optimization. Otherwise,
we'll be getting unoptimized NIR in from ANV and the vectorizer won't be
able to do anything with it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4367>
This commit makes us take both bit size and alignment into account so
that we can properly handle cases such as when we have a 32-bit store
to an 8-bit-aligned address.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4367>
Thanks to the NIR vectorizing pass, we're about to see alignments that
are higher than the bit size. Previously, we could use either and we
just happened to choose alignment (probably the wrong choice) so it's
harmless to switch to detecting based on bit size. This commit changes
things to take both into account which is more accurate to what the
messages we're using do. We also beef up the asserts and make them more
consistent, more accurate, and more complete.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4367>
Store the fragment shader inputs in the program data so we can use them
later when required without needing the NIR shader.
Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2010>
For Gen8-11, there are some restrictions around sampling from HiZ.
The Skylake PRM docs for RENDER_SURFACE_STATE::AuxiliarySurfaceMode
say:
"If this field is set to AUX_HIZ, Number of Multisamples must
be MULTISAMPLECOUNT_1, and Surface Type cannot be SURFTYPE_3D."
Fixes: dEQP-VK.geometry.layered.3d.*.readback
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2720
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Arcady Goldmints-Orlov <agoldmints@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4409>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4409>
This change incurs a small amount of hurt now, but it enables a lot of
benefit on vec4 shaders on the next commit. nir_opt_algebraic_late
converts dph, dot3, etc. to dhp_replicated, dot_replicated3, etc. In
the process, it introduces extra moves. If the original NIR contained
vec1 32 ssa_45 = fdot4 ssa_51, ssa_44
vec1 32 ssa_46 = fneg ssa_45
nir_opt_algebraic_late will produce
vec4 32 ssa_18 = fdot_replicated4 ssa_1, ssa_15
vec1 32 ssa_19 = mov ssa_18.x
vec1 32 ssa_17 = fneg ssa_19
The algebraic pass added in the next commit can't see through the move
to know that the fneg applies to a fdot_replicated4.
Haswell, Ivy Bridge, and Sandybridge had similar results. (Haswell shown)
total cycles in shared programs: 187077604 -> 187079858 (<.01%)
cycles in affected programs: 350132 -> 352386 (0.64%)
helped: 174
HURT: 194
helped stats (abs) min: 2 max: 124 x̄: 23.60 x̃: 16
helped stats (rel) min: 0.12% max: 15.88% x̄: 4.98% x̃: 3.86%
HURT stats (abs) min: 2 max: 164 x̄: 32.78 x̃: 16
HURT stats (rel) min: 0.17% max: 22.82% x̄: 6.46% x̃: 0.86%
95% mean confidence interval for cycles value: 2.04 10.21
95% mean confidence interval for cycles %-change: 0.17% 1.93%
Cycles are HURT.
No shader-db changes on any other Intel platform.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1359>
Those format have correct descriptions already with the exception of
the planar format. In that case we introduce an assert.
This fine because we don't use the planar format in any of our
drivers. There are restrictions on how the addresses of the 2 planes
are relative to one another which make this annoying. The sampler is
also more limited than what we can do with a shader snippet.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2999>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2999>
This isn't a format we use in any of the drivers but for consistency
just give it a correct bpb.
We also set the luminance in the G channel. We can't actually use this
format with the 3D sampler (only media).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2999>
When we originally wrote a bunch of the allocation data structures, we
re-used the GPU memory for CPU-side data structures. It's a bit more
memory efficient and usually ok. However, this has a couple of
problems:
1. It makes it MUCH more likely that the GPU will accidentlly stomp
CPU-side data structures and cause nearly impossible to debug
crashes.
2. With discrete GPUs, the memory will be mapped somehow and that map
may be across the BAR so it could have horribly slow CPU access.
This is bad for our CPU-side data structures.
In the case of anv_state_stream, it also made the data structure
massively more complex than it needed to be.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4336>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4336>
If we have an allocation that's exactly the block size, we end up
computing a new block size to allocate that's exactly the block size,
add in the header, and then assert fail. When computing the block size,
we need to account for the header.
Fixes: 955127db93 "anv/allocator: Add support for large stream..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4336>
Let's make it clear what includes are being added everywhere, so that
they can be cleaned up.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4360>
Where they belong.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
This stuff is somewhat specific to the GL extension & drivers. On
Vulkan we won't use this, it also made a rather large file.
v2: Fix Android build (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4344>
This has been reported to fix a hang in Shadow of Mordor on Gen12.
One of its compute shaders seems to cause an in-order exec_all
dependency to be merged into an out-of-order SET dependency slot,
which would prevent us from baking the SET dependency into the parent
instruction, leading to an assert failure in emit_inst_dependencies()
(Thanks to Rafael for noticing that). Prevent that by avoiding
combination of in-order dependencies whenever that would cause a SET
dependency to be demoted to a SYNC.NOP instruction.
Fixes: e14529ff32 "intel/fs/gen12: Workaround data coherency issues due to broken NoMask control flow."
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
gen_get_device_info_from_fd fetches the timestamp frequency from the
kernel. ANV also carrying code for it is redundant.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4250>
Capture the HEAD and TAIL register values from the dump and
properly index the ring buffer using those. Previously we would
decode the ring buffer from the beginning, printing out whatever
happened to be there.
Also, properly pass the `from_ring` parameter to gen_print_batch()
so that decoding doesn't stop once MI_BATCH_BUFFER_END is
encoutered.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4261>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4261>
Lets specifiy maximum number of patches that will be accumulated before
a thread is dispatched.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3563>
Return the number of patches to accumulate before an 8_PATCH mode thread
is launched.
v2: (Kenneth Graunke)
- Track patch count threshold instead of input control points.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3563>
Previously, we were initializing the CCS to 0xFF for MCS+CCS due to a
misunderstanding of the following lines in the bspec:
The following are the general SW requirements for MCS buffer clear
functionality:
...
- If Software wants to enable Color Compression without Fast
clear, Software needs to initialize MCS with zeros.
- Lossless compression and CCS initialized to all F (using HW
Fast Clear or SW direct Clear) on the same surface is not
supported.
The first line does not refer to the CCS as the comment author supposed
but refers to the MCS as the comment says. It means that if you want to
use MCS compression without a fast-clear, you should initialize the MCS
to 0x00. This is because the value 0x00 in the MCS means "all data is
in plane 0" which is a perfectly valid non-fast-clear initialization.
It's also the value the MCS should be in if you do a RECTLIST slow-clear
where the primitive fully covers each pixel such that the same value is
written to all samples.
The second line in the above quote seems to imply that CCS fast-clear is
incompatible with MCS fast-clear. In particular, MCS+CCS fast-clear
uses a 0xff value in the MCS (like on Gen7-11) and leaves the CCS in
either the compressed or the pass-through state. Therefore, we should
initialize the CCS to 0x00 even for MCS+CCS surfaces.
Reviewed-by: Sagar Ghuge<sagar.ghuge@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4074>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4074>
When the caller of the isl_surf_init() specifies a row pitch, do not
consider the minimum CCS requirement if it's incompatible with the
caller's value.
isl_surf_get_ccs_surf() will check that the main surface alignment
matches CCS expectations.
v2: Simplify checks (Nanley)
v3: Add Comment about isl_surf_get_ccs_surf() (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Fixes: a3f6db2c4e ("isl: drop CCS row pitch requirement for linear surfaces")
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4243>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4243>
We could be creating a Y-tiled surface that isn't going to use CCS
(this could be the case when clearly indicated through modifiers).
Don't apply the main surface pitch alignment constraint in that case.
v2: Use logical NOT (Sagar)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: a3f6db2c4e ("isl: drop CCS row pitch requirement for linear surfaces")
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4243>
Y tiling is supported for display on Gen9+ so don't filter it from the
possible flags.
v2: Drop Yf from display supported tilings on Gen12+ (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4243>
We're missing a requirement for alignment of row pitch for the display
HW. In linear tiling, the row pitch must be a 64bytes aligned.
v2: Use correct formula to align to 64bytes (Chad)
v3: Matching {} (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4243>
Starting with Gen12, we can fast-clear a lot more surface formats and we
are suddenly in the position of having to fast-clear surfaces with
formats with an implicit swizzle such as VK_FORMAT_R4G4B4A4_UNORM_PACK16
which is represented as ISL_FORMAT_A4B4G4R4 with a BGRA swizzle. In
order for blorp to do the fast-clear color conversion for us, it needs
a properly swizzled color.
This fixes the following Vulkan CTS groups on TGL:
- dEQP-VK.pipeline.blend.format.b4g4r4a4_unorm_pack16.*
- dEQP-VK.api.image_clearing.core.clear_color_image.*.b4g4r4a4*
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4218>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4218>
