GFX9 needs to write event EOP to a fence buffer, allocate some
space for this, and just write an ever increasing number to it,
this isn't exactly what radeonsi does, but it seems to work.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds support for initialising some GFX9 registers,
and handles the different init for the VGT reuse reg.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds the strings and includes the gfx9 register defs
in some files that we need them in.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just collapses a few per-stage things into a loop,
shouldn't affect anything.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Sets could have been ignored during previous descriptor set flush
due to the shader not using them and therefore no SGPR being assigned.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
We clear the descriptors_dirty array afterwards, so the SGPRs for
the other pipeline don't get updated on the flush for that other
draw/dispatch, so we have to make sure we do it immediately.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: ae61ddabe8 "radv: move userdata sgpr ownership to compiler side."
In prep for GFX9 refactor some of the eop event writing code
out.
This changes behaviour, but aligns with what radeonsi does,
it does double emits on CIK/VI, whereas previously it only
did this on CIK.
v2: bump the size checks.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This code was in a few places, consolidate into one.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
0x30f regressed mad max.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Fixes: df91abfe5a "radv: Use correct clear words for HTILE."
flush_compute_state doesn't reserve a large chunk, so these need their own reservation.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: f4e499ec79 "radv: add initial non-conformant radv vulkan driver"
Did some RE'ing what several HTILE words give when read from a descriptor
with HTILE compression enabled.
Seems to align with -pro usage for D16 too.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
And correct implementation to specify only what we support.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This drops the resolve workarounds that change an image
tiling mode behinds it's back, this is horrible and breaks
the image_view->image relationship. Remove all this.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radv_bind_descriptor_set cannot be used to bind a push descriptor set
since a push descriptor set does not have a buffer list. However,
there is no need to add the buffers again when restoring a set, so
this fix is also an optimization.
Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All of the dynamic states apply to rasterization & fragment processing,
so we don't need to set them if we don't rasterize.
We don't clear the dirty flags for them though, so we don't miss any
updates for the next pipeline with rasterization.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 76603aa90b "radv: Drop the default viewport when 0 viewports are given."
We would be storing this info twice per image, no need to,
remove it from the surface struct.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is to rework the surface code like radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gives me approximately a 2% perf increase in bot dota2 & talos.
Having descriptors (both sets and vertex buffers) prefetched
didn't help so I didn't include that.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
This bumps the limit to the number of sets to 32, now that
we have proper support for it. It also uses 1u in a few places
to make things a bit safer.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We want to expose more descriptor sets to the applications,
but currently we have a 1:1 mapping between shader descriptor
sets and 2 user sgprs, limiting us to 4 per stage. This commit
check if we don't have enough user sgprs for the number of
bound sets for this shader, we can ask for them to be indirected.
Two sgprs are then used to point to a buffer or 64-bit pointers
to the number of allocated descriptor sets. All shaders point
to the same buffer.
We can use some user sgprs to inline one or two descriptor sets
in future, but until we have a workload that needs this I don't
think we should spend too much time on it.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In practice this will probably just drop draw id in a few places.
v2: just do draw_id for now. (Bas)
it might be possible to do something more if we need it in the
future. (nha)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is some radv specific info we need to gather from shaders
before we get into converting nir->llvm, so we can make
better decisions especially around user sgpr allocation.
This is just an initial placeholder to gather if sample positions
are required in the frag shader.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This allows meta to use push descriptors without disturbing user
push descriptors.
radv_meta_push_descriptor_set differs from vkCmdPushDescriptorSetKHR
in that partial updates are not supported; all descriptors used in
subsequent draw commands must be pushed at the same time.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Most trace points happen after an operation, so add a trace point
at the start of the command buffer.
Furthermore, add one after a CmdUpdateBuffer using CP_DMA as that
didn't emit one yet.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
According to the Vulkan spec, VkPipelineInputAssemblyStateCreateInfo's
primitiveRestartEnable flag should only apply to indexed draws, however
it was being enabled regardless of the type of draw. This could cause
problems for non-indexed draws with >=65535 vertices if the previous
indexed draw used 16-bit indices.
Fixes corruption of the credits text in Mad Max.
v2: Reset primitive restart state after executing a secondary command
buffer.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This appears to be a leftover from an earlier version of this function.
Nothing is emitted into the CS.
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
All offsets and strides are precomputed by
radv_CreateDescriptorUpdateTemplateKHR and stored in the template.
v2: Move the new struct declarations from radv_descriptor_set.h
to radv_private.h (Bas)
Signed-off-by: Fredrik Höglund <fredrik@kde.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
The current code was broken, and I decided to redesign it instead.
This puts the sample positions for all samples into the queue
constant descriptor buffer after all the spill/ring descriptors.
It then uses a single offset register to point how far into the
samples the samples for num_samples are. This saves one user sgpr
and means we only generate the sample position data in the rare
single case where we need it currently.
This doesn't fix the failing CTS tests without the followup
fix.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This emits the tessellation shaders and state to the command stream.
It contains the logic to emit the LS/HS shaders.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This ports the VGT_VERTEX_REUSE register settings
for Polaris GPUs from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds support for the offchip rings for storing
tessellation factors and attribute data.
It includes the register setup for the TF ring
v2: always do tess ring size calcs (Bas)
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just adds support for tess to the shader stage conversion
and emits the per-stage descriptors/constants for tess stages.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vulkan Clipping is defined in terms of vertices, the scissor based
clipping happens on pixels. There is a difference with points and
lines, as a vertex can be outside the viewport while some pixels are in.
On Vulkan thoise pixels shouldn't be drawn, while they would be with
the guardband.
Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
With tess this becomes a bit more complex. so move to pipeline
for now.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This also takes the side band setting code from radeonsi.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to calculate this on each command submit.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
There is no need to recalculate this every time.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to faciliate adding tess support, split the vs/es
output info into a separate block, so we make it easier to
have the tess shaders export the same info.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
