This is probably rarely used but it can be easily implemented now.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8650>
In some rare cases, L2 needs to be flushed if an image is affected
by the pipe misaligned issue. This is roughly based on AMDVLK.
I confirmed that disabling TC-compat HTILE, and respectively DCC,
for the relevant images also fixes the regressions below.
This fixes some regressions introduced with L2 coherency for
dEQP-VK.renderpass2.depth_stencil_resolve.image_2d_* and for
dEQP-VK.renderpass2.suballocation.multisample_resolve.*.
Fixes: 4a783a3c78 ("radv: Use L2 coherency on GFX9+.")
Co-Authored-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8557>
Especially on GFX10 we can avoid pretty much all L2 flushes.
However, instead of that we have to do L2_METADATA invalidations. We
do that every time we could possibly be reading new DCC/HTILE info
from the L2 cache in shaders.
Benchmark results, basemark on high preset with a navi10 on profile_standard
(which is slower than a navi10 on default settings, please don't compare
to random navi10 results you find)
before:
5932
5928
5937
after:
6011
6013
6009
So this looks like a >1% increase.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7202>
This way we're properly using the vulkan barrier paradigm instead
of adhoc guessing what caches need to be flushed. This is more robust
for cache policy changes as we now don't have to revisit all the meta
operations all the time.
Note that a barrier has both a src and dst part though. So
barrier:
flush src
meta op
flush dst
becomes
barrier:
flush barrier src
flush meta op dst
meta op
flush meta op src
flush barrier dst
And there are some places where we've been able to replace a CB flush
with a shader flush because that is what we'd need according to vulkan rules
(and it turns out that in the cases the CB flush mattered the app will set the
bit in one of the relevant flushes or it was needed as a result of an optimization
that we counter-acted in the previous patch.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7202>
To cancel the optimization in radv_dst_access_flush if these helpers
get used by meta operations.
We could also remove that optimization but I think this triggers less
often as all SHADER_WRITE flushes on images not supporting STORAGE should
be meta
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7202>
In case we don't have DCC, we can still predicate FCE with CMASK.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8332>
GFX10+ supports compressed writes to HTILE, so it should just work
to skip decompressions when transitioning from/to GENERAL.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8039>
Otherwise it's useless because we are unlikely to perform a
fast depth stencil clear.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8039>
We can only use the entire HTILE buffer if TILE_STENCIL_DISABLE is
TRUE. On GFX8+, this is only true if the depth image has no stencil
and if it's not TC-compatible because of the ZRANGE_PRECISION issue.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8039>
To make sure the stencil compare state is properly initialized and
cleared when the driver performs a fast depth clear.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8039>
Not doing this for APUs because spilling is quite likely, due to
overall VRAM pressure.
Also adding a flag to disable for performance debugging.
Finally adds some memset for places where we depended on the memory
being initialized to zero, which we won't get with VRAM anymore.
(I think these places should stop depending on it since it hides
issues with executing the cmdbuffer multiple times, but this
preserves behavior)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7979>
Fixes dEQP-VK.api.copy_and_blit.*.4_bit. I think the MSAA2x and
MSAA8x just passed by luck.
Fixes: 7b21ce401f ("radv: disable FMASK compression when drawing with GENERAL layout")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7915>
This can result in meaningful compression changes so we shouldn't skip.
Fixes: 66131ceb8b "radv: Pass through render loop detection to internal layout decisions."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7004>
Only supported on GFX10.3+. Attachment Fragment Shading Rate is
for later.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7837>
It might be useful to know if the VA is valid and if other info
like the stride seems correct.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7753>
This workaround fixes a hang while loading a renderdoc trace for me.
Since the workload does 1 mip per cmdbuffer it is quite hard to confirm
what exactly the conditions for the hang are but this is the most
restrictive set I found and it corresponds to a workaround in AMDVLK as
well.
CC: mesa-stable
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7210>
It's expected to be 0.
Fixes: 62d9ca696e ("radv: use 32-bit predication for conditional rendering on GFX10.3+")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7789>
It seems that only gfx queue doesn't support it, except on GFX10.3
which supports all queues.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7732>
The fce metadata can always be set to false as we don't care about
the compressed clear color.
Avoiding useless fast clear eliminates improves basemark performance by
1%-1.5%.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7005>
Not doing the EOP TS cacheflush event because that break wave counting
in RGP for some reason. But the rest looks to be all there.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6550>
Since the flushes really happen on the next draw delay the barrier
end to include the flushes.
This fixes the barrier duration in RGP.
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6550>
From the Vulkan 1.2.154 spec:
"If pCounterBufferOffsets is NULL, then it is assumed the
offsets are zero."
Fix new CTS
dEQP-VK.transform_feedback.simple.backward_dependency_no_offset_array.
CC: mesa-stable
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6798>
If radv_layout_can_fast_clear() is false, 028C70_COMPRESSION is unset when
the image is rendered to and CMASK isn't updated. This appears to cause
FMASK to be ignored and the 0th sample to always be used.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3449
Fixes: 7b21ce401f
('radv: disable FMASK compression when drawing with GENERAL layout')
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6745>
