This is an error case where the I field has no reference, however
the reference list contains some reference, which resulting in
not be able to find its reference, and it is a correct behavior,
should not enter the correction code. Just add this exception to
prevent such a case, if more exceptions found, they will
be treated indiviually in the future.
Cc: mesa-stable
closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/8740
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22485>
Some comparisons were wrong depending on swapped endpoints and
the bottom_edge_rule (if the endpoint was exactly touching
pixel center), hence the code assuming a line endpoint which
should be drawn according to diamond exit rules would already be
drawn (so not adjusting the endpoint) when in reality it was not,
in which case the line would end up one pixel too short.
Note that this is still not fully correct - the logic as such
should be correct now, however these comparisons can give wrong
results due to float math vs. fixed point planes (an endpoint very
close to a pixel center might be exactly at pixel center in fixed
point), but this should do for now. (Also, the logic is still
completely wrong for state trackers not using half_pixel_center
setting, but this is only really a concern for dx9 state tracker.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22481>
Depth compare function must be set to the configured one only when
compare mode is enabled; otherwise it must be configured to never.
v2 (Eric):
- Handle V3D < 4.0 case
CC: mesa-stable
Reviewed-by: Eric Engestrom <eric@igalia.com>
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22470>
For instance, this issue is triggered with: "piglit/bin/useprogram-flushverts-2 -auto -fbo" or
"piglit/bin/primitive-restart-draw-mode line_loop -auto"
while setting GALLIUM_REFCNT_LOG=refcnt.log.
Fixes: 27dcb46629 ("gallium: add take_ownership param into set_vertex_buffers to eliminate atomics")
Signed-off-by: Patrick Lerda <patrick9876@free.fr>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22395>
Ensure builds flag the use of Intel sources when the i915 Gallium driver
is configured (`-Dgallium-drivers=i915`). Otherwise, a build may fail if
other Intel-based configuration options are not enabled:
./src/gallium/winsys/i915/drm/meson.build:21:0: ERROR: Unknown variable "libintel_common".
Signed-off-by: James Knight <james.d.knight@live.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22490>
It should be handled like DEPTH_STENCIL_READ_ONLY_OPTIMAL.
This fixes an issue with VRS attachment because HTILE was considered
disabled for READ_ONLY_OPTIMAL but there is no reasons to disable it
as long as the image is only used as a depth/stencil attachment.
Otherwise, when HTILE is disabled, VRS rates are ignored.
Cc: mesa-stable
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/8675
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22468>
It's always going to be the same for all the jobs in our farm.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Juan A. Suarez <igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22457>
Doesn't matter for now, but it doesn't cost anything to make it portable :)
Suggested-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22450>
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22450>
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22450>
To make sure we can't accidentally run a random leftover platform.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22450>
Makes it clearer which platform is being run.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22450>
Makes it clearer which platform is being run.
Signed-off-by: Eric Engestrom <eric@igalia.com>
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Reviewed-by: Emma Anholt <emma@anholt.net>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22450>
Applying the same rule as the fs backend so that generation code
doesn't assert.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: daa8003e45 ("intel/fs: use nomask for setting cr0 for float controls")
Reviewed-by: Emma Anholt <emma@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22473>
it's useful for drivers to be able to detect big.LITTLE topology in
order to make decisions about how to handle workloads (specifically as
it relates to threading)
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21926>
At the moment it's an all or nothing. A driver supporting fine-grained
system SVM can enable it in order to get full SVM support.
Lower levels could be emulated by userptrs and placing the bo at the same
locations in the GPU's VM as well, but that would require reworking quite
a bit on the drivers side.
For now supporting mmu_notifiers on the kernel side is the only way of
getting SVM support with Rusticl.
The only driver having the gallium bits wired up atm is Nouveau, but I
suspect it shouldn't be all to hard for iris and radeonsi as well.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/19712>
Anv is trying to rely on the stages put into the library graphics
state.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22460>
this is almost certainly a failure case, but drivers still shouldn't
get xfb info if there are no outputs
affects:
spec@glsl-1.50@execution@interface-blocks-api-access-members
cc: mesa-stable
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22448>
Replace 'unsignalled' with 'ready' to simplify logic.
Remove needless !! in !!(a > b) expressions.
Remove some casting. Use MIN2() macro. Add const qualifiers.
Declare loop vars in loops.
Signed-off-by: Brian Paul <brianp@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22464>
