First step towards inverting the dependency between glsl and nir (so nir
can be used without glsl). Also solves this issue with 'make distclean'
Making distclean in mesa
make[2]: Entering directory '/mnt/sdb1/Src64/Mesa-git/mesa/src/mesa'
Makefile:2486: ../glsl/.deps/shader_enums.Plo: No such file or directory
make[2]: *** No rule to make target '../glsl/.deps/shader_enums.Plo'. Stop.
make[2]: Leaving directory '/mnt/sdb1/Src64/Mesa-git/mesa/src/mesa'
Makefile:684: recipe for target 'distclean-recursive' failed
make[1]: *** [distclean-recursive] Error 1
make[1]: Leaving directory '/mnt/sdb1/Src64/Mesa-git/mesa/src'
Makefile:615: recipe for target 'distclean-recursive' failed
make: *** [distclean-recursive] Error 1
Reported-by: Andy Furniss <adf.lists@gmail.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Right now nir_instrs_equal() is tied pretty tightly to CSE, but we're
going to introduce the idea of an instruction set and tie it to that
instead. In anticipation of that, move this into its own file where
we'll add the rest of the instruction set implementation later.
v2: Rebase on texture support.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
With NIR, it actually hurts things.
total instructions in shared programs: 6529329 -> 6528888 (-0.01%)
instructions in affected programs: 14833 -> 14392 (-2.97%)
helped: 299
HURT: 1
In all affected programs I inspected (including the single hurt one) the
pass CSE'd some multiplies and caused some reassociation (e.g., caused
(A * B) * C to be A * (B * C)) when the original intermediate result was
reused elsewhere.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Some hardware (such as Broadwell) can run geometry shaders more
efficiently when the number of vertices emitted is statically known.
This pass provides a way to obtain the constant vertex count, or
-1 indicating that the vertex count is unknown/non-constant.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This patch also introduces a lowering pass to convert the simple GS
intrinsics to the new ones. See the comments above that for the
rationale behind the new intrinsics.
This should be useful for i965; it's a generic enough mechanism that I
could see other drivers potentially using it as well, so I don't feel
too bad about putting it in the generic code.
v2:
- Use nir_after_block_before_jump for the cursor (caught by Jason
Ekstrand - I'd mistakenly used nir_after_block when rebasing this
code onto the new NIR control flow API).
- Remove the old emit_vertex intrinsic at the end, rather than in
the middle (requested by Jason).
- Use state->... directly rather than locals (requested by Jason).
- Report progress from nir_lower_gs_intrinsics() (requested by me).
- Remove "Authors:" section from file comment (requested by
Michael Schellenberger Costa).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
With the only C++ function having its own wrapper we can 'demote' this
file to a normal C one. This allows us to get rid of extern C { #include
<foo.h> } 'hacks'. Plus some of the headers may use C99 initializers,
which are not supported by the ISO standard.
This may cause build issue on incremental builds. If so run the
following:
sed -i -e 's|samplers\.cpp|samplers.c|' src/glsl/nir/.deps/nir_lower_samplers.Plo
Fixes: ef8eebc6ad5(nir: support indirect indexing samplers in struct arrays)
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reported-by: Gottfried Haider <gottfried.haider@gmail.com>
Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Since the following patches will add additional tex-lowering related
functionality, which doesn't make sense to split out into a separate
pass (as they would require duplication of the projector lowering
logic), let's give this pass a more generic name.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The vertex shader lowering adds calculation for CLIPDIST, if needed
(ie. user-clip-planes), and the frag shader lowering adds conditional
kills based on CLIPDIST value (which should be treated as a normal
interpolated varying by the driver).
Note that this won't quite do the right thing in the face of MSAA plus
user-clip-planes, since all the samples would be killed or not (rather
than potentially only a portion of them). But it's better than no UCP
support at all for drivers that don't have this in hw.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
This pass can be used as a helper for NIR producers so they don't have to
worry about creating the temporaries themselves.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Rather than folding one variable within the other only to unwrap them,
just use the ones we need.
v2: bring back LOCAL_PATH prefix for nir_constant_expressions,h
Cc: 11.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com> (v1)
v2: use nir_cf_node_remove_after() instead of our own broken thing.
v3: use the new control flow modification helpers.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We want to start reworking and expanding this code, but it'll be a lot
easier to do once we disentangle it from the rest of the stuff in nir.c.
Unfortunately, there are a few unavoidable dependencies in nir.c on
methods we'd rather not expose publicly, since if not used in very
specific situations they can cause Bad Things (tm) to happen. Namely, we
need to do some magical control flow munging when adding/removing jumps.
In the future, we may disallow adding/removing jumps in
nir_instr_insert_*() and nir_instr_remove(), and use separate functions
that are part of the control flow modification code, but for now we
expose them and put them in a separate, private header.
Signed-off-by: Connor Abbott <connor.w.abbott@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We may find a cause to do more undef optimization in the future, but for
now this fixes up things after if flattening. vc4 was handling this
internally most of the time, but a GLB2.7 shader that did a conditional
discard and assign gl_FragColor in the else was still emitting some extra
code.
total instructions in shared programs: 100809 -> 100795 (-0.01%)
instructions in affected programs: 37 -> 23 (-37.84%)
v2: Use nir_instr_rewrite_src() to update def/use on src[0] (by Thomas
Helland).
v3: Make sure to flag metadata dirties, and copy the swizzle and abs/neg
over to src[0], too (by anholt).
Reviewed-by: Thomas Helland <thomashelland90@gmail.com> (v2)
Tested-by: Thomas Helland <thomashelland90@gmail.com> (v2)
This is useful to increase the CSE opportunities for a scalar backend. It
avoids regressions when dropping vc4's custom CSE implementation.
v2: Cleanups by Matt (decl in the for loop, and unreachable()).
Reviewed-by: Matt Turner <mattst88@gmail.com>
This lowers the enhanced ir_call using the lookaside table
of subroutines into an if ladder. This initially was done
at the AST level but it caused some ordering issues so a separate
pass was required.
v2: clone return value derefs.
v2.1: update for subroutine->int convert.
v2.2: add a clone for the array index
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Similar to gl_ClipDistance -> gl_ClipDistanceMESA
v2: - renamed is_mesa_var to lowered_builtin_array_variable
- moved LowerTessLevel into gl_constants
- cosmetic changes in lower_tess_level.cpp
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This pass performs a mark and sweep pass over a nir_shader's associated
memory - anything still connected to the program will be kept, and any
dead memory we dropped on the floor will be freed.
The expectation is that this will be called when finished building and
optimizing the shader. However, it's also fine to call it earlier, and
many times, to free up memory earlier.
v2: (feedback from Jason Ekstrand)
- Skip sweeping impl->start_block, as it's already in the CF list.
- Don't sweep SSA defs (they're owned by their defining instruction)
- Don't steal phi sources (they're owned by nir_phi_instr).
- Don't steal tex->src (it's owned by the tex_inst itself)
- Don't sweep dereference chains (top-level dereferences are owned by
the instruction; sub-dereferences are owned by the parent deref).
- Don't sweep sources and destinations (SSA defs are handled as part of
the defining instruction, and registers are handled as part of
function implementations).
- Just steal instructions; don't walk them (no longer required).
v3: (feedback from Jason Ekstrand)
- Steal indirect sources from nir_src/nir_dest.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Based on the algo from NV50LegalizeSSA::handleDIV() and handleMOD().
See also trans_idiv() in freedreno/ir3/ir3_compiler.c (which was an
adaptation of the nv50 code from Ilia Mirkin).
A python/numpy script which implements the same algorithm (and is
possibly useful for debugging or analysis) can be found here:
http://people.freedesktop.org/~robclark/div-lowering.py
I've tested this on i965 hacked up to insert the idiv lowering pass,
and on freedreno with NIR frontend.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Tested-by: Eric Anholt <eric@anholt.net> (vc4)
This commit adds a pass to L1-normalize cube-map coordinates. Some hardware
such as i965 requires that largest cube-map coordinate is +-1. We had a
pass to perform this normalization in GLSL IR but we need it in NIR for
cube maps on ARB programs to work correctly.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
v2 (Suggested by Eric):
- Do a vector fabs and split into components later
- Move to core NIR
Reviewed-by: Eric Anholt <eric@anholt.net>
Not much hardware wants them these days, and it might give us a chance to
do CSE or algebraic at the NIR level.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
NIR uses these enums/#defines in nir_variables and associated intrinsics,
but I want to be able to use them from TGSI->NIR and NIR->TGSI.
Otherwise, we had to pull in all of mtypes.h.
This doesn't cover all of the enums we might want from a shared compiler
core (like varying slots or vert attribs), but it at least covers what I
need at the moment (system values and interp qualifiers).
v2: Move to src/glsl since util/ is really vague. Include in Makefile.am
list. Use plain bitshifts and stdint types instead of undefined
BITFIELD64_BIT.
v3: Rename to shader_enums.h. Move it into Makefile.sources.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v2, with
recommendation to rename)
The header was added with commit 2a135c470e3(nir: Add an ALU op builder
kind of like ir_builder.h) but did not made it into to the sources list.
Fortunately it remained unused until a recent commit faf6106c6f6(nir:
Implement a Mesa IR -> NIR translator.)
v2: Remove the bogus dependency. Tweak commit message.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>
st_glsl_to_tgsi and ir_to_mesa have handled conditional discards for a
long time; the previous patch added that capability to i965.
i965 (Haswell) shader-db stats:
Without NIR:
total instructions in shared programs: 5792133 -> 5776360 (-0.27%)
instructions in affected programs: 737585 -> 721812 (-2.14%)
helped: 6300
HURT: 68
GAINED: 2
With NIR:
total instructions in shared programs: 5787538 -> 5769569 (-0.31%)
instructions in affected programs: 767843 -> 749874 (-2.34%)
helped: 6522
HURT: 35
GAINED: 6
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Use nir_dominance_lca for computing least common anscestors
- Use the block index for comparing dominance tree depths
- Pin things that do partial derivatives
Reviewed-by: Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
v2: Rebase on the nir_opcodes.h python code generation support.
v3: Use SSA values, and set an appropriate writemask on dot products.
v4: Make the arguments be SSA references as well. This lets you stack up
expressions in the arguments of other expressions, at the cost of
having to insert a fmov/imov if you want to swizzle. Also, add
the generated file to NIR_GENERATED_FILES.
v5: Use more pythonish style for iterating the list.
v6: Infer the size of the dest from the size of the srcs, and auto-swizzle
a single small src out to the appropriate size.
v7: Add little helpers for initializing the struct, add a typedef for the
struct like other nir types have.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v6)
Reviewed-by: Connor Abbott <cwabbott0@gmail.com> (v7)
v2 Jason Ekstrand <jason.ekstrand@intel.com>:
- Add better comments
- Use nir_ssa_dest_init and nir_src_for_ssa more places
- Fix some void * casts
v3 Jason Ekstrand <jason.ekstrand@intel.com>:
- Rework the way we determine whether or not to sccalarize a phi node to
make the recursion non-bogus
- Treat load_const instructions as scalarizable
v4 Jason Ekstrand <jason.ekstrand@intel.com>:
- Allow uniform and input loads to be scalarizable
v5 Jason Ekstrand <jason.ekstrand@intel.com>:
- Also consider loads of inputs (varying, uniform, or ubo) to be
scalarizable. We were already doing this for load_var on uniforms and
inputs.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add a required field to the Opcode class, const_expr, that contains an
expression or statement that computes the result of the opcode given known
constant inputs. Then take those const_expr's and expand them into a function
that takes an opcode and an array of constant inputs and spits out the constant
result. This means that when adding opcodes, there's one less place to update,
and almost all the opcodes are self-documenting since the information on how to
compute the result is right next to the definition.
The helper functions in nir_constant_expressions.c were taken from
ir_constant_expressions.cpp.
v3 Jason Ekstrand <jason.ekstrand@iastate.edu>
- Use mako to generate one function per opcode instead of doing piles of
string splicing
v4 Jason Ekstrand <jason.ekstrand@iastate.edu>
- More comments and better indentation in the mako
- Add a description of the constant expression language in nir_opcodes.py
- Added nir_constant_expressions.py to EXTRA_DIST in Makefile.am
Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Before, we used a system where a file, nir_opcodes.h, defined some macros that
were included to generate the enum values and the nir_op_infos structure. This
worked pretty well, but for development the error messages were never very
useful, Python tools couldn't understand the opcode list, and it was difficult
to use nir_opcodes.h to do other things like autogenerate a builder API. Now, we
store opcode information in nir_opcodes.py, and we have nir_opcodes_c.py to
generate the old nir_opcodes.c and nir_opcodes_h.py to generate nir_opcodes.h,
which contains all the enum names and gets included into nir.h like before. In
addition to solving the above problems, using Python and Mako to generate
everything means that it's much easier to add keep information centralized as we
add new things like constant propagation that require per-opcode information.
v2:
- make Opcode derive from object (Dylan)
- don't use assert like it's a function (Dylan)
- style fixes for fnoise, use xrange (Dylan)
- use iterkeys() in nir_opcodes_h.py (Dylan)
- use pydoc-style comments (Jason)
- don't make fmin/fmax commutative and associative yet (Jason)
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
v3 Jason Ekstrand <jason.ekstrand@intel.com>
- Alphabetize source file lists
- Generate nir_opcodes.h in the builddir instead of the source dir
- Include $(builddir)/src/glsl/nir in the i965 build
- Rework nir_opcodes.h generation so it generates a complete header file
instead of one that has to be embedded inside an enum declaration
This is the equivalent of brw_fs_channel_expressions.cpp, which I wanted
for vc4.
v2: Use the nir_src_for_ssa() helper, and another instance of
nir_alu_src_copy().
v3: Drop the non-SSA support. All intended callers will have SSA-only ALU
ops.
v4: Use insert_before, drop stale bcsel/fcsel comment, drop now-unused
unsupported() function, drop lower_context struct.
v5: Completely rename the pass to nir_lower_alu_to_scalar(), add an assert
about weird input_sizes[].
Reviewed-by: Jason Ekstrand <jason.ekstrand@iastate.edu>
Apparently $(top_srcdir) is not expanded in a source list when using
subdir-objects, so remove that. It's not clear to me why we were going
to such lengths to prefix each source file anyway.
This new interface allows for writing a series of objects to a chunk
of memory (a "blob").. The allocated memory is maintained within the
blob itself, (and re-allocated by doubling when necessary).
There are also functions for reading objects from a blob as well. If
code attempts to read beyond the available memory, the read functions
return 0 values (or its moral equivalent) without reading past the
allocated memory. Once the caller is done with the reads, it can check
blob->overrun to ensure whether any invalid values were previously
returned due to attempts to read too far.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
A worklist is a common concept in optimizations. This adds a structure
that we can reuse for many different types of optimizations.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
The original name wasn't particularly descriptive. This one indicates that
it actually gives you SSA values as opposed to the old pass which lowered
variables to registers.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This pass uses the previously built algebraic transformations framework and
should act as an example for anyone else wanting to make an algebraic
transformation pass for NIR.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This framework provides a simple way to do simple search-and-replace
operations on NIR code. The nir_search.h header provides four simple data
structures for representing expressions: nir_value and four subtypes:
nir_variable, nir_constant, and nir_expression. An expression tree can
then be represented by nesting these data structures as needed. The
nir_replace_instr function takes an instruction, an expression, and a
value; if the instruction matches the expression, it is replaced with a new
chain of instructions to generate the given replacement value. The
framework keeps track of swizzles on sources and automatically generates
the currect swizzles for the replacement value.
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
