If we read the OA reports late enough after the query happens, we can
get a timestamp in the report that is significantly in the past
compared to the start timestamp of the query. The current code must
deal with the wraparound of the timestamp value (every ~6 minute). So
consider that if the difference is greater than half that wraparound
period, we're probably dealing with an old report and make the caller
aware it should read more reports when they're available.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit b364e920bf)
We always add an empty buffer in the list when creating the query.
Let's set the len appropriately so that we can recognize it when we
read OA reports up to the end of a query.
We were using an 0 timestamp value associated with the empty buffer
and incorrectly assuming this was a valid value. In turn that led to
not reading enough reports and resulted in deltas added to our counter
values which should have been discarded because those would be flagged
for a different context.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 9d0a5c817c)
Accumulation happens between 2 reports, it can be between a start/end
report from another context. So only consider updating the hw_id of
the results when it's not already valid and that we have a valid value
to put in there.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 41b54b5faf ("i965: move OA accumulation code to intel/perf")
Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit acea59dbf8)
gl_Viewport is also in the VUE header so we need to whack the read
offset to 0 and emit a default (no overrides) SBE_SWIZ entry in that
case as well.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
(cherry picked from commit b1f37688ba)
Reworks:
* Adjust comment to list the state packets that curro found to be
affected.
Fixes: 8125d7960b ("intel/dev: Add preliminary device info for Tigerlake")
Cc: 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
(cherry picked from commit e277009d8d)
Fixes: 13ab63bb62 ('radv: Implement VK_EXT_buffer_device_address.')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 35fab1ba33)
Fixes: 93c8ebfa78 'aco: Initial commit of independent AMD compiler'
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
(cherry picked from commit 8861a82be7)
LLVM and the proprietary compiler seem to do this
Fixes: b01847bd9 ("aco/gfx10: Fix mitigation of VMEMtoScalarWriteHazard.")
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit a9fc81b098)
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit 11f43caaec)
ptiled is always NULL so the if statement is useless.
CoverityID: 1415572
Fixes: b962776530 ("etnaviv: rework compatible render base")
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
(cherry picked from commit 1be220833c)
brw_performance_query_metrics.h was removed in
134e750e16 and
brw_performance_query.h was removed in
8ae6667992
remove reference to these files from Makefile.sources
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Fixes: 134e750e16 ("i965: extract performance query metrics")
Fixes: 8ae6667992 ("intel/perf: move query_object into perf")
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
(cherry picked from commit 34dda0ca65)
We must reset the damage info of our render targets here even though a
damage reset normally happens when the DRI layer swaps buffers. That's
because there can be implicit flushes the GL app is not aware of, and
those might impact the damage region: if part of the damaged portion
is drawn during those implicit flushes, you have to reload those areas
before next draws are pushed, and since the driver can't easily know
what's been modified by the draws it flushed, the easiest solution is
to reload everything.
Reported-by: Carsten Haitzler <raster@rasterman.com>
Fixes: 65ae86b854 ("panfrost: Add support for KHR_partial_update()")
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
(cherry picked from commit c6e2096c47)
BACK_LEFT attachment can be outdated when the user calls
KHR_partial_update() (->lastStamp != ->texture_stamp), leading to a
damage region update on the wrong pipe_resource object.
Let's delay the ->set_damage_region() call until the attachments are
updated when we're in that case.
Reported-by: Carsten Haitzler <raster@rasterman.com>
Fixes: 492ffbed63 ("st/dri2: Implement DRI2bufferDamageExtension")
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit b196e1a8cf)
Was totally broken ...
Removed two if(point) {} because point is always non-NULL and we
were counting on that already for counting, since we NULL our
references to semaphores without active point earlier.
Fixes: 4aa75bb3bd "radv: Add wait-before-submit support for timelines."
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2137
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 48fc65413c)
pthread_mutex_unlock() when unlocked is documented by posix as
being undefined behaviour. On OpenBSD pthread_mutex_unlock() will call
abort(3) if this happens.
This occurs in amdgpu_winsys_create() after
cb446dc0fa
winsys/amdgpu: Add amdgpu_screen_winsys
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Cc: 19.2 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
(cherry picked from commit 3fe3bde4f2)
They were out of sync. Besides syncing, lets ensure they never diverge
again.
Fixes: 8d2654a419 "radv: Support VK_EXT_inline_uniform_block."
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 4cde0e04e3)
When drawing the main character in Shadow of Mordor, the game appears
to draw Talion with one vertex shader, and the Wraith with another.
If the compiler optimizes those in different ways which lead to slight
imprecisions, then the resulting positions may not line up, leading to
Z-fighting occurring as the game decides which of the two are in front.
brw_nir_opt_peephole_ffma looks at usages of multiply adds across the
entire shader, and may make different decisions between the two, leading
to such imprecisions and Z-fighting. This started happening recently
after a NIR change to eliminate unnecessary MOVs (7025dbe7), but that
change simply exposed the existing problem.
Improves performance on Skylake GT4e by 1.22945% +/- 0.398672% (n=3),
likely due to the fixed rendering.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1985
Fixes: 7025dbe794 ("nir: Skip emitting no-op movs from the builder.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 51cc380894)
Many applications use multi-pass rendering and require their vertex
shader position to be computed the same way each time. Optimizations
may consider, say, fusing a multiply-add based on global usage of an
expression in a shader. But a second shader with the same expression
may have different code, causing that optimization to make the other
choice the second time around.
The correct solution is for applications to mark their VS outputs
'invariant', indicating they need multiple shaders to compute that
output in the same manner. However, most applications fail to do so.
So, we add a new driconf option - vs_position_always_invariant - which
forces the gl_Position output in vertex shaders to be marked invariant.
Fixes: 7025dbe794 ("nir: Skip emitting no-op movs from the builder.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
(cherry picked from commit 9b577f2a88)
This implementation is loosely based on ROCm.
https://github.com/RadeonOpenCompute/ROCm-Device-Libs/blob/master/ockl/src/wfredscan.cl
This fixes dEQP-VK.subgroups.arithmetic.*.subgroupexclusive* on GFX10.
Fixes: 227c29a80d ("amd/common/gfx10: implement scan & reduce operations")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit c9aa843961)
Conflicts resolved by Dylan Baker
When a fragment shader includes an input variable decorated with
SampleId or SamplePosition, sample shading should be enabled
because minSampleShadingFactor is expected to be 1.0.
Cc: 19.2, 19.3 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
(cherry picked from commit 86a5fbfd4a)
Do not link libgallium_nine with libgalliumvl_stub if it's already
linked with libgalliumvl. Linking with stub leads to "duplicate
symbol" errors.
Fixes: 6b4c7047d5
("meson: build gallium nine state_tracker")
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2040
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
(cherry picked from commit 9af22ccddc)
Fixes: 946193ae00 "radv: add support for VK_AMD_buffer_marker"
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 25bc9102d8)
Commit 0899bf55 made some deqp-gles3 tests related to RGB8 PBOs fail
on R600 because it exposed PIPE_FORMAT_R8G8B8_UNORM and R600 doesn't
propely handle this. Disabling this format also for buffers fixes the
issue.
In addition, disabling also the related RGB8 integer formats for buffers
fixes some deqp-gles3 tests:
dEQP-GLES3.functional.texture.specification.teximage2d_pbo.rgb8ui_cube
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8i_2d
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8i_cube
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8ui_2d
dEQP-GLES3.functional.texture.specification.texsubimage2d_pbo.rgb8ui_cube
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8i_2d_array
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8i_3d
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8ui_2d_array
dEQP-GLES3.functional.texture.specification.teximage3d_pbo.rgb8ui_3d
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8i_2d_array
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8i_3d
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8ui_2d_array
dEQP-GLES3.functional.texture.specification.texsubimage3d_pbo.rgb8ui_3d
Fixes: 0899bf55
st/mesa: Map MESA_FORMAT_RGB_UNORM8 <-> PIPE_FORMAT_R8G8B8_UNORM
Closes#2118
Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit e41958e344)
In order to prevent a potential malicious pipeline tainting our
secure compile process and interfering with successive pipelines
we want to create a fresh fork for each pipeline compile.
Benchmarking has shown that simply forking on each pipeline
creation doubles the total time it takes to compile a fossilize db
collection. So instead here we fork the process at device creation
so that we have a slim copy of the device and then fork this
otherwise idle and untainted process each time we compile a
pipeline. Forking this slim copy of the device results in only a
20% increase in compile time vs a 100% increase.
Fixes: cff53da3 ("radv: enable secure compile support")
(cherry picked from commit f54c4e85ce)
This will be used to create a communication pipe between the user
facing device and a freshly forked (per pipeline compile) slim copy
of that device.
We can't use pipe() here because the fork will not be a direct fork
of the user facing process. Instead we use a previously forked
copy of the process that was forked at device creation in order to
reduce the resources required for the fork and avoid performance
issues.
Fixes: cff53da374 ("radv: enable secure compile support")
(cherry picked from commit 1663bb1f77)
In the following commits we want to be able to fork an existing lightweight
fork created at device creation time. In order for the user facing process
to communicate with this new fresh fork we create some members here to hold
FIFO file descriptors and a unique id.
Here we also add a new fork enum that we use to tell the lightweight
process to create a fresh fork.
For more information on why we create a fresh fork see the following
commits.
(cherry picked from commit ef54f15da9)
Fixes: cea39af2fb ("freedreno/ir3: Generalize ir3_shader_disasm()")
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit d0f38394b1)
Specifically when we are in non-uniform control flow, as we would need
to set the condition for the last instruction. If (for example) a
image atomic load stores directly their value on a NIR register,
last_inst would be a nop, and would fail when set the condition.
Fixes piglit test:
spec/glsl-es-3.10/execution/cs-ssbo-atomic-if-else-2.shader_test
Fixes: 6281f26f06 ("v3d: Add support for shader_image_load_store.")
v2: (Changes suggested by Eric Anholt)
* Cover all sig.ld* signals, not just ldunif and ldtmu, as all of
them have the same restriction.
* Update comment explaining why we add a MOV in that case
* Tweak commit message.
v3:
* Drop extra set of parens (Eric)
* Add missing ld signal to is_ld_signal to fix shader-db regression.
Reviewed-by: Eric Anholt <eric@anholt.net>
(cherry picked from commit b4bc59e37e)
When the scratch ringbuffer settings are changed, the shader unit has
to be idle or we will have shaders using old and new settings.
That combination is not supported on the HW (likely the offset is
ringbuffer idx * WAVESIZE * 1024).
CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
(cherry picked from commit 4eb2a1dc6f)
Two files exist in that directory:
- vulkan_xlib_randr.h
- vulkan_xlib_xrandr.h
Both were imported in 205c271562 ("vulkan: Update the XML and
headers to 1.1.70") with identical contents (ie. the
VK_EXT_acquire_xlib_display extension), but the former was never
included anywhere and can't be found upstream [1], while the latter is
included in vulkan.h and found upstream.
[1] https://github.com/KhronosGroup/Vulkan-Headers/tree/master/include/vulkan
Fixes: 205c271562 ("vulkan: Update the XML and headers to 1.1.70")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
(cherry picked from commit 344859c32d)
The bounds checking is actually less safe than just pushing the data.
If the bounds checking actually ever kicks in and it's not on the last
UBO push range, then the shrinking will cause all subsequent ranges to
be pushed to the wrong place in the GRF. One of the behaviors we
definitely don't want is for OOB UBO access to result in completely
unrelated UBOs returning garbage values. It's safer to just push the
UBOs as-requested. If we're really concerned about robustness, we can
emit shader code to do bounds checking which should be stupid cheap (a
CMP followed by SEL).
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
A security advisory (TALOS-2019-0857/CVE-2019-5068) found that
creating shared memory regions with permission mode 0777 could allow
any user to access that memory. Several Mesa drivers use shared-
memory XImages to implement back buffers for improved performance.
This path changes the shmget() calls to use 0600 (user r/w).
Tested with legacy Xlib driver and llvmpipe.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
(cherry picked from commit 02c3dad0f3)
This reverts commit f30c256ec0.
See 088a2a4cab031f1505d531698109f330f94f3072
Fixes: f30c256ec0 ("freedreno/ir3: enable pre-fs texture fetch for a6xx")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Re-emitting 3DSTATE_CC_STATE_POINTERS after emitting
3DSTATE_BLEND_STATE_POINTERS fixes the shadow flickering in
SuperTuxCart and Tropico 6 which was seen only on Haswell.
The reason for this is unknown and fix was found empirically.
The closest mention in PRM is that it should improve performance.
From the HSW PRM, volume 2b, page 823 (3DSTATE_BLEND_STATE_POINTERS):
"When the BLEND_STATE pointer changes but not the CC_STATE pointer,
driver needs to force a CC_STATE pointer change to improve
blend performance in pixel backend."
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1834
Fixes: eca4a654 ("i965: Disable dual source blending when shader doesn't support it on gen8+")
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
(cherry picked from commit 6f17fe0606)
A change from b7093882 got overwritten by 610c8c93
Fixes: 610c8c93 ("freedreno/registers: Update with GS, HS and DS registers")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 75e58d1fae)
Prefetch only supports the basic 2D texture case, checking is_array is
needed because 1d array textures pass the coord num_components==2 test.
Fixes: 2a0d45ae ("freedreno/ir3: Add a NIR pass to select tex instructions eligible for pre-fetch")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@gmail.com>
(cherry picked from commit 0f5743429c)
Large programs, e.g. gnome-shell and firefox, may tax the
addressability of the Medium code model once a (potentially unbounded)
number of dynamically generated JIT-compiled shader programs are
linked in and relocated. Yet the default code model as of LLVM 8 is
Medium or even Small.
The cost of changing from Medium to Large is negligible:
- an additional 8-byte pointer stored immediately before the shader entrypoint;
- change an add-immediate (addis) instruction to a load (ld).
Testing with WebGL Conformance
(https://www.khronos.org/registry/webgl/sdk/tests/webgl-conformance-tests.html)
yields clean runs with this change (and crashes without it).
Testing with glxgears shows no detectable performance difference.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1753327, 1753789, 1543572, 1747110, and 1582226
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/223
Co-authored by: Nemanja Ivanovic <nemanjai@ca.ibm.com>, Tom Stellard <tstellar@redhat.com>
CC: mesa-stable@lists.freedesktop.org
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
(cherry picked from commit 9c3be6d21f)
Conflicts resolved Dylan (PIPE_ARCH -> UTIL_ARCH rename)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit be1d11249b)
No pipeline-db changes
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 93c8ebfa ('aco: Initial commit of independent AMD compiler')
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
(cherry picked from commit b062b92ab1)
