Only legacy OpenGL allows the use of non-gen'd names. Core profiles
and ES 3 both require the use of glGenQueries().
Note that BeginQuery doesn't exist in ES 1 or ES 2.
Fixes es3conform's occlusion_query_invalid_beginquery test.
Reviewed-and-tested-by: Matt Turner <mattst88@gmail.com>
GL_READ_FRAMEBUFFER and GL_DRAW_FRAMEBUFFER are valid targets in ES 3.
Fixes 23 es3conform framebuffer_blit tests. Two more go from fail to
crash, but that appears to be because they actually run now.
Reviewed-and-tested-by: Matt Turner <mattst88@gmail.com>
Calling glTexParameteri() with pname GL_TEXTURE_MAX_LEVEL and either a
target of GL_TEXTURE_RECTANGLE or a negative value previously generated
GL_INVALID_OPERATION. However, GL_INVALID_VALUE seems more appropriate.
Fixes oglconform's api-error/negative.glTexParameter and es3conform's
sgis_texture_lod_basic_error.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-and-tested-by: Matt Turner <mattst88@gmail.com>
The new brw_reg always had type BRW_REGISTER_TYPE_F, rather than
inheriting the original type of the ATTR file register.
In the past, this hasn't been a problem since we only execute this code
when fixing up GL_FIXED attributes, which always have float types.
However, we'll soon be using it for ARB_vertex_type_10_10_10_2 support,
which uses D and UD types.
Reviewed-by: Eric Anholt <eric@anholt.net>
When dri2CreateContextContextAttribs failed, eglCreateContext returned
NULL yet set the error code to EGL_SUCCESS! The problem was that
eglCreateContext ignored the error code returned by
driCreateContextAttribs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56706
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
For GLES1 and GLES2, brwCreateContext neglected to validate the requested
context version received from the DRI layer. If DRI requested an OpenGL
ES2 context with version 3.9, we provided it one.
Before this fix, the switch statement that validated the requested GL
context flavor was an ugly #ifdef copy-paste mess. Instead of reproducing
the copy-past-mess for GLES1 and GLES2, I first refactored it. Now the
switch statement is readable.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
It seems that -NDEBUG and other flags might still be leaked through
those variables, so strip those off there as well.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
In addition to registers used by instructions, fs_visitor maintains
direct references to certain "special" values used for inputs/outputs.
When I added VGRF compaction, I overlooked these, believing that these
direct references weren't used once instructions were generated. That
was wrong. For example, pixel_x/y are used in virtual_grf_interferes(),
which is called by optimization passes and register allocation.
This patch treats all of them as used and patches them after compacting.
While it's not strictly necessary to patch all of them (as some aren't
used after emitting code), it seems safer to simply fix them all.
Fixes oglconform's textureswizzle/advanced.shader.targets, piglit's
glsl-fs-lots-of-tex, and glean's texCombine on pre-Gen6 hardware.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56790
Reviewed-by: Eric Anholt <eric@anholt.net>
The goal of that change was to skip counting things that aren't actually
outputs from the VS to the FS. However, explicit_location isn't set in
the case of linker-assigned locations (the common case), so basically
varying component counting got disabled. At this stage of the linker,
we've already ensured that var->location is set, so we can just look at
it without worrying.
Fixes i965 assertion failure with the new
piglit glsl-max-varyings --exceed-limits.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=51545
Reviewed-by: Brian Paul <brianp@vmware.com>
The diff looks funny, but it's moving the integer vs non-integer check
below the _mesa_source_buffer_exists() check that ensures
_ColorReadBuffer is non-null, so we get a GL_INVALID_OPERATION instead
of a segfault. This looks like it had regressed in the
_mesa_error_check_format_and_type() changes, which removed the first of
the two duplicated checks for the source buffer. Fixes segfault in the
new piglit ARB_framebuffer_object/negative-readpixels-no-rb.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45877
NOTE: This is a candidate for the stable branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Now that we're using the new backend, we may actually put things into push
constants if you have too many uniform values uploaded. Also, correctly
account for texture rectangle params and drop the old special case for the
0.0/1.0 params from the old backend.
MinGW has snprintf.
The patch fixes these warnings with the MinGW SCons build.
src/gallium/auxiliary/util/u_snprintf.c:459:1: warning: no previous prototype for ‘util_vsnprintf’ [-Wmissing-prototypes]
src/gallium/auxiliary/util/u_snprintf.c:1436:1: warning: no previous prototype for ‘util_snprintf’ [-Wmissing-prototypes]
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Tested-by: Brian Paul <brianp@vmware.com>
If an instruction reads from a constant register that contains
immediates using an invalid swizzle, we can avoid generating MOV
instructions to fix up the swizzle by loading the immediates into a
different constant register that can be read using a valid swizzle.
This only affects r300 and r400 cards.
For example:
CONST[1] = { -3.5000 3.5000 2.5000 1.5000 }
MAD temp[4].xy, const[0].xy__, const[1].xz__, input[0].xy__;
========== Before this change would be lowered to: =========
CONST[1] = { -3.5000 3.5000 2.5000 1.5000 }
MOV temp[0].x, const[1].x___;
MOV temp[0].y, const[1]._z__;
MAD temp[4].xy, const[0].xy__, temp[0].xy__, input[0].xy__;
========== After this change is lowered to: ===============
CONST[1] = { -3.5000 3.5000 2.5000 1.5000 }
CONST[2] = { 0.0000 -3.5000 2.5000 0.0000 }
MAD temp[4].xy, const[0].xy__, const[2].yz__, input[0].xy__;
============================================================
This change reduces one of the Lightsmark shaders from 133 to 91
instructions.
v2:
- Fix crash caused by swizzles with only inline constants.
Use per asic golden values.
Programming this register doesn't seem to be strictly
necessary on SI, but programming it wrong leads to
rendering issues or reduced performance so just
go ahead and program the golden values explicitly
to avoid any potential problems down the road.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
For precise lts support I had to do some magic with the library names, which works fine
as long as the libraries from pkg-config are used.
The parts with src/gallium/targets/va-*/Makefile will not apply on the master branch,
but do apply to the 9.0 branch.
NOTE: This is a candidate for the 9.0 branch.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Not maintained since 2008. Doubtful that it's worked in quite a while.
Also see commit 32ac8cb05 which removed VMS stuff from Makefile in 2009.
Cc: Jouk Jansen <j.jansen@tudelft.nl>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
fixes regression introduced in 9078441072
Targets for making lex.yy.c program_parse.tab.c and program_parse.tab.h
got moved into its own Makefile
Reviewed-by: Matt Turner <mattst88@gmail.com>
This was added in version 22 of the GL_ARB_sync spec.
Fixes gles3conform's sync_error_waitsync_timeout test.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All the other range checks on index already return the proper error,
INVALID_VALUE.
Fixes gles3conform's instanced_arrays_invalid test.
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
brw_optimize.c's brw_opcodes table was a copy of brw_disasm.c's
opcode_descs table, but with an additional field: is_arith. Now that
I've deleted that, the two are identical. Keep the one in brw_disasm.c.
Reviewed-by: Eric Anholt <eric@anholt.net>
All users of basic block analysis simply create their own local
variables. Nobody uses the visitor-wide field.
Reviewed-by: Eric Anholt <eric@anholt.net>
The old brw_remove_grf_to_mrf_moves() pass is obsolete and replaced by
fs_visitor::compute_to_mrf().
The old brw_remove_duplicate_mrf_moves() pass is obsolete and replaced
by fs_visitor::remove_duplicate_mrf_writes().
The remaining pass, brw_set_dp4_dependency_control(), is currently
unused, but could be, so I'm leaving it for now.
Reviewed-by: Eric Anholt <eric@anholt.net>
At this point, it's just gl_shader_program. Nobody even uses it; even
the program that creates them only returns gl_shader_program pointers.
Reviewed-by: Eric Anholt <eric@anholt.net>
The passthrough pipeline needs to check index values (which might be passed
through) as they can be invalid (which causes crashes and various assertion
failures if the clip code runs). Obviously, rendering won't be well-defined,
but those bogus indices might come directly from apps.
There were already debug printfs which reported the out-of-bounds indices but
we really ought to not crash.
While checking at that point doesn't seem like the most efficient solution,
it seems there isn't really another appropriate function to do it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Clean up a few magic numbers and rework the code a bit.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Assert the the CB format is valid and default to
the INVALID hw format rather than ~0U when the format
doesn't match for non-debug builds.
v2: use INVALID hw format rather than ~0U
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Assert that the DB format is valid and default to
the INVALID hw format rather than ~0U when the format
doesn't match for non-debug builds.
v2: use INVALID hw format rather than ~0U
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
