This fixes:
GL45-CTS.direct_state_access.xfb_buffers
This test looks correct to me, we should work out the
size value and report it rather than using only the size
from the Range interface.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The dependencies should not mention any files external to the project.
If we want to do sanity checks for the LLVM installed on the system we
should do that in configure, yet again where is the merit which header
gets checked and which doesn't ?
Cc: Tim Rowley <timothy.o.rowley@intel.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Otherwise `make distcheck' will barf at us as the file is dangling.
Ideally this should be part of the clean-local hook, although we include
install-lib-links.mk which already has one.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We should not have removed them in the first place. There's a subtle
difference between generating the complete sources and using them which
was not obvious as we nuked them.
Without this, the release tarball ends up without various hunks of the
generated sources, thus things fail at a later stage as we attempt to
build them.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Otherwise it will be missing from the release tarball.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
[Emil Velikov: use the file in the autoconf build]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
As seen elsewhere - we want to include the freshly built sources as
opposed the the (likely) stale ones in the srcdir.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fold the unneeded extra variable tests_ldadd, the explicit sources
section (single file with the default extension) and flip the
check_PROGRAMS <> TESTS order (TESTS includes scripts, while
check_PROGRAMS is binaries only).
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
One uses the makefile to create compatibility symlinks (to
$top_builddir/libs) for shared libraries/modules. As we don't create any
here, there's no need to include the file.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
As we do not include any other subdirs but self, we don't need to set
it.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
[Emil Velikov: use the file in the autoconf build]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Otherwise we'll end up setting up a device with no winsys integration.
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
---
Hard-coding the rendernode name in anv_physical_device_init() is a bad
idea really. We could/should be using drmGetDevices() to get info on all
the devices (master/render/etc. node names, pci location etc.) and apply
our heuristics on top of that.
That can come up as a follow up change.
Ensure that the final X11/XCB hunk is guarded by the correct macro.
Otherwise we'll require the symbol even when building without said
platform.
Cc: Cedric Sodhi <manday@openmail.cc>
Reported-by: Cedric Sodhi <manday@openmail.cc>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The return variable was not set for failure paths.
It has now been changed to VK_ERROR_INITIALIZATION_FAILED
for failure paths.
Coverity: 1358944
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
[Emil Velikov: rebase against master, s/vulkan/anv/]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Push offset down to drivers when importing dmabuf. This is needed
to more fully support EGL_EXT_image_dma_buf_import when a non-zero
offset is specified.
Tesing has been done for freedreno, and compile tested following
gallium drivers:
nouveau,svga,virgl,r600,r300,radeonsi,swrast,i915,ilo
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
This helps to import dmabuf buffers from DRM_FORMAT_R8 and
DRM_FORMAT_GR88 used for example by GStreamer for YUV to RGB
conversion using shaders.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
We know that there cannot be any destination dependency race if we
reach the beginning or end of the program without having found any
other instruction the send could possibly race with. This avoids
emitting a pile of useless moves at the beginning or end of the
program in the most common case in which the program has a single
basic block only.
On the original i965 I get the following shader-db results:
total instructions in shared programs: 3354165 -> 3215637 (-4.13%)
instructions in affected programs: 3183065 -> 3044537 (-4.35%)
helped: 13498
HURT: 0
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Just to make sure we keep the SIMD lowering pass tidy when we
introduce additional logic to try to optimize out the copy
instructions used to zip and unzip the destination and source regions
into multiple packed regions of the lowered instruction width.
Shouldn't cause any functional changes.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be useful in several places. The only externally visible
difference (other than non-VGRF files being supported now) is that the
region sizes are now passed in byte units instead of in GRF units
because the loss of precision would have become a problem in the SIMD
lowering pass.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will be useful in the SIMD lowering pass to avoid having to
construct a builder object of the known region width just to pass it
as argument to offset(), which doesn't do anything with it other than
taking the builder dispatch_width as region width.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This makes the whole LOAD_PAYLOAD munging unnecessary which simplifies
the code and will allow the optimization to succeed in more cases
independent of whether the LOAD_PAYLOAD instruction can be found or
not.
The following patch is squashed in:
SQUASH: i965/fs: Add basic dataflow check to opt_sampler_eot().
The sampler EOT optimization pass naively assumes that the texturing
instruction provides all the data used by the FB write just because
they're standing next to each other. The least we should be checking
is whether the source and destination regions of the FB write and
texturing instructions match. Without this the previous seemingly
harmless patch would have caused opt_sampler_eot() to misoptimize a
shader from dota-2 causing DCE to eliminate all of its 78 instructions
except for the final sampler EOT message (!).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
There are two reasons why this is useful:
- It avoids the introduction of an amount of partial writes emitted
by the SIMD lowering pass to zip and unzip register regions early
during optimization, which can make subsequent optimization less
effective.
- It substantially reduces the burden on the compiler when a large
fraction of the instructions in the program need to be split (e.g.
during SIMD32 builds). Individual halves of split instructions
will be optimized identically (if they can still be optimized at
all), so doing it up front can duplicate the amount of instructions
the optimizer has to deal with which causes the compilation time to
explode in some cases due to the worse-than-linear runtime
behaviour of the back-end.
It seems helpful to re-run a few optimization passes in cases where
any of the lowering passes was able to make progress.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Logical sends are eventually lowered into a series of copies so they
can take almost anything as source.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will prevent some shader-db regressions when we start plumbing
logical sends through the optimizer.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This will let the optimizer know that the sample mask value is unused
so its definition can be DCE'ed.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This partially fixes CTS test:
GL44-CTS.enhanced_layouts.xfb_get_program_resource_api
The test now fails at a tes evaluation shader with unsized output arrays.
The ARB_enhanced_layouts spec says:
"It is a compile-time error to apply xfb_offset to the declaration of an
unsized array."
So this seems like a bug in the CTS.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94925
Pointed out by Karol Herbst on irc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The spec says gl_NextBuffer and gl_SkipComponents need to be
returned to userspace in the program interface queries.
We currently throw those away, this requires a complete piglit
run to make sure no drivers fallover due to the extra varyings.
This fixes:
GL45-CTS.program_interface_query.transform-feedback-built-in
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These types can't be returned.
This fixes:
GL43-CTS.shader_subroutine.subroutines_not_allowed_as_variables_constructors_and_argument_or_return_types
for the return type case.
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This stops the offset being bumped again when and an explicit
alignment has already been applied.
Fixes alignment issues in:
GL44-CTS.enhanced_layouts.uniform_block_alignment
Note the test still fails due to unrelated issues with doubles.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
It appears we were over-allocating these arrays.
Previously we would use nir->num_uniforms directly for scalar
programs, and multiply it by 4 for vec4 programs.
Instead we should have been dividing by 4 in both cases to convert
from bytes to a gl_constant_value count. The size of gl_constant_value
is 4 bytes.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
GL ES 2.0+ does not have a GL_PROGRAM_POINT_SIZE enable, unlike desktop
GL. So we have to go and check the last pre-rasterizer stage to see
whether it outputs a point size or not.
This fixes a number of dEQP tests that use a geometry or tessellation
shader to emit points primitives.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.1 11.2" <mesa-stable@lists.freedesktop.org>
From the OpenGL 4.5 core spec:
"An INVALID_VALUE error is generated if texture is not zero and level is
not a supported texture level for textarget, as described above."
Other FramebufferTexture functions already do the right thing.
This fixes the main menu in F1 2015.
Cc: 11.1 11.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
