The vertex cache uses the full 48-bit address on Gen11+. See the
documentation for 3DSTATE_VERTEX_BUFFERS, which describes the
workaround and lists it as pre-Icelake.
Interestingly, the docs don't mention index buffers as needing a
workaround at all. So either we've been overzealous, or the docs
never got updated to record that. Which begs the question of whether
the issue there was fixed, if there was one...
Cuts 40% of the PIPE_CONTROLs from Civilization VI's benchmark; appears
that it improves performance by about 1-2% on Icelake 8x8 (not frequency
locked).
We may have replaced the backing storage for a texture buffer while it
was unbound, at which point iris_rebind_buffer would not have caught it
and updated it. We need to ensure that the current resource's address
matches the one our SURFACE_STATE points at. If not, update addresses
and re-upload the SURFACE_STATE.
Shader images and buffers do not suffer from this problem because we
re-stream the surface state on every set call, since there isn't a
created CSO object for those with a saved SURFACE_STATE. Constant
buffers are also currently re-streamed (we pitch the SURFACE_STATE
on every set_constant_buffer call). Surfaces would need this
treatment (as they're created CSOs) except that we never swap out
their backing storage today (we only do it for buffers), so it's OK
for now.
Fixes misrendering in Unreal 4 demos (Elemental, Matinee Fight Scene).
Huge thanks to Andrii Simiklit for tracking down the problem - it was
quite difficult to find! Also fixes Andrii's new Piglit test for the
bug, 'arb_texture_buffer_object-re-init'.
Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/1365
When replacing the backing storage for texture buffers, image buffers,
and so on, we may need to update the "Surface Base Address" field in
any corresponding SURFACE_STATE. This is easier to accomplish if we
have a copy on the CPU - we can just compare the current field, update
it, and re-upload.
This patch adds a CPU-side copy to the new iris_surface_state wrapper
struct, and reworks allocation and upload to fill things out on the
CPU copy first, then upload that to the GPU when finished.
This will be necessary to fix iris_invalidate_resource bugs shortly.
Technically, we never replace the backing storage for pipe_surfaces
(render targets), so we don't need to make this change there. However,
it's nice to have surfaces, sampler views, and image views handled
similarly. Plus, if we ever wanted to swap out backing storage for
busy textures, we'd need this infrastructure.
v2: Properly free memory (caught by Andrii Simiklit)
Today, we only have a state reference to the GPU buffer containing our
uploaded SURFACE_STATEs. However, we're going to want a CPU-side copy
soon. Making a wrapper struct means we can talk about both together,
and also put both in the field called "surface_state".
We can just compare the VERTEX_BUFFER_STATE address field to the
current BO's address. When calling rebind, we've already updated
the resource to the new buffer, but the state will have the old
address.
Mutating fields of global resources is generally not safe, and the only
reason we were doing it was to avoid passing an extra parameter to
the fill_surface_state helper.
To make PIPE_FORMATs usable from non-gallium parts of Mesa, I want to
move their helpers out of gallium. Since u_format used
util_copy_rect(), I moved that in there, too.
I've put it in a separate directory in util/ because it's a big chunk
of related code, and it's not clear to me whether we might want it as
a separate library from libmesa_util at some point.
Closes: #1905
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
In 2ca0d913ea, we began updating cso_fb->layers to the actual layer
count, rather than 0. This fixed cases where we were setting "Force
Zero RTA Index Enable" even when doing layered rendering. Sadly, it
also broke the check entirely: cso_fb->layers is now 1 for non-layered
cases, but the Force Zero RTA Index check was still comparing for 0.
Fixes: 2ca0d913ea ("iris: Fix framebuffer layer count")
When starting a BLORP operation, we do the BTI-change flush. However,
when ending it and transitioning back to regular drawing, we change the
render target again - without a set_framebuffer_state() call. We need
to do the BTI flush there too. BLORP flags IRIS_DIRTY_RENDER_BUFFER
now, which will cause the next draw to get the BTI flush again.
(explanation of fix by Ken)
Fixes: 2b956a093a ("iris: totally untested icelake support")
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
For gen12 we set the streamout buffers using 4 separate
commands instead of 3DSTATE_SO_BUFFER.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In gen12 we use the 3DSTATE_DEPTH_BOUNDS instruction
to enable depth bounds testing.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This should help avoid stalls in the pixel mask array in certain
non-promoted depth cases. It especially helps for Z16, as each bit
in the PMA corresponds to two pixels when using Z16, as opposed to
the usual one pixel.
Improves performance in GFXBench5 TRex by 22% (n=1).
bound_vertex_buffers doesn't include extra draw parameters buffers.
Tracking this correctly is kind of complicated, and iris_destroy_state
isn't exactly in a hot path, so just loop over all VBO bindings.
Fixes: 4122665dd9 (iris: Enable ARB_shader_draw_parameters support)
Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
u_upload_mgr sets it, so that util_range_add can skip the lock.
The time spent in tc_transfer_flush_region decreases from 0.8% to 0.2%
in torcs on radeonsi.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is a port of Nanley's 904c2a617d
from i965 to iris.
One concern is that iris uses larger batches, and also emits far fewer
commands, so we may come closer to the 500 limit within a batch, and
could need to supplement this with actual counting. Manhattan 3.0 had
239 3DSTATE_CONSTANT_PS packets in a batch, Unigine Valley had 155.
So it seems like we're still in the realm of safety.
We can't just check for the BO base address, we need to check for the
full address including any offset we may have applied. When updating
the address, we need to include the offset again.
Fixes: 5ad0c88dbe ("iris: Replace buffer backing storage and rebind to update addresses.")
This reverts commit 729de1488f.
It turns out that, although the register is in the logical context,
it isn't whitelisted, so we can't actually write it from userspace
batch buffers. The write just becomes a noop, which is why we saw
no performance changes.
I manually whitelisted it, and still observed no performance gains, but
it did regress KHR-GL46.texture_cube_map_array.color_depth_attachments
on the iris driver. So we might need to fix something before enabling
this. To prevent it randomly getting turned on should the kernel ever
whitelist this register, we revert the patch for now.
This improves a couple of things:
1. We now only update anything if the shader actually cares.
Previously, is_indexed_draw was causing us to flag dirty vertex
buffers, elements, and SGVs every time the shader switched between
indexed and non-indexed draws. This is a very common situation,
but we only need that information if the shader uses gl_BaseVertex.
We were also flagging things when switching between indirect/direct
draws as well, and now we only bother if it matters.
2. We upload new draw parameters only when necessary.
When we detect that the draw parameters have changed, we upload a
new copy, and use that. Previously we were uploading it every time
the vertex buffers were dirty (for possibly unrelated reasons) and
the shader needed that info. Tying these together also makes the
code a bit easier to follow.
In Civilization VI's benchmark, this code was flagging dirty state
many times per frame (49 average, 16 median, 614 maximum). Now it
occurs exactly once for the entire run.
If we can entirely push uniform data, we don't need a SURFACE_STATE
descriptor for pulling data. Since constant uploads are a very common
operation, and being able to push all data is also very common, we would
like to avoid the overhead in this case.
This patch defers uploading new descriptors. Instead of handling that
at iris_set_constant_buffer, we do it at iris_update_compiled_shaders,
where we can see the currently bound shader variants. If any need pull
descriptors, and descriptors are missing, we update them and flag that
the binding table also needs to be refreshed.
Improves performance in GFXBench5 gl_driver2 on an i7-6770HQ by
31.9774% +/- 1.12947% (n=15).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We now track per-stage bind history for constant and shader buffers,
shader images, and sampler views by adding an extra res->bind_stages
field to go with res->bind_history.
This lets us flag IRIS_DIRTY_CONSTANTS for only the specific stages
involved, and also skip some CPU overhead in iris_rebind_buffer.
Cuts 4% of 3DSTATE_CONSTANT_XS packets in a Shadow of Mordor trace
on Icelake.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Right now, we usually flag both IRIS_DIRTY_{CONSTANTS,BINDINGS}_XS,
because we have SURFACE_STATE for constant buffers in case the shaders
access them via pull mode.
But this flagging is overkill in many cases. Gen8 and Gen11 don't need
it at all. Gen9 doesn't need that large of a hammer in all cases.
Just handle it explicitly so the right thing happens.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We upload a new SURFACE_STATE for the UBO/SSBO in question, which
means that we need new binding tables as well.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The compiler now sets the "Null Render Target" bit in the RT write
extended message descriptor, causing it to write to an implicit null
surface without us needing to set one up in the binding table.
Together with the last patch, this improves performance in Car Chase on
an Icelake 8x8 (locked to 700Mhz) by 0.0445526% +/- 0.0132736% (n=832).
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It was calloc'd to 0 which is PIPE_PRIM_POINTS, which means that we
fail to notice an initial primitive of points being new, and fail at
updating the "primitive is points or lines" field.
We do not need to reset this on device loss because we're tracking
the last primitive mode sent to us on the CPU via draw_vbo, not the
last primitive mode sent to the GPU.
Fixes several tests:
- dEQP-GLES3.functional.clipping.point.wide_point_clip
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_center
- dEQP-GLES3.functional.clipping.point.wide_point_clip_viewport_corner
Fixes: dcfca0af7c ("iris: Set XY Clipping correctly.")
Initial benchmarking didn't show any performance benefits. But it might eventually.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Since the system value refactor, we've accidentally only been setting
cbuf->buffer_size in the UBO case, and not in the uploaded-constants
case. We use cbuf->buffer_size to fill out the SURFACE_STATE entry,
so it needs to be initialized in both cases.
Fixes: 3b6d787e40 ("iris: move sysvals to their own constant buffer")
This cuts roughly 85% of the 3DSTATE_SAMPLER_STATE_POINTERS_PS calls in
the J2DBench images test. For some reason, the state tracker is calling
bind_sampler_state with the same sampler state in a bunch of cases.
The line stipple pattern and factor only matter if line stippling is
actually enabled. Otherwise, we can safely ignore it.
PBO upload may give us zero for line stipple information, while normal
drawing tends to give us an actual stipple pattern such as 0xffff. This
was causing us to flag IRIS_DIRTY_LINE_STIPPLE way too often, leading to
useless 3DSTATE_LINE_STIPPLE commands, which are non-pipelined and thus
very expensive.
Improves performance in Manhattan 3.0 on Skylake GT4e by
0.149261% +/- 0.0380796% (n=210). On an Icelake 8x8 with the GPU
frequency locked at 700Mhz, improves by 0.423756% +/- 0.222843% (n=3).
This bit redirects the state cache from the unified/RO sections of the
L3 cache to the "CS command buffer" section of the cache, which would
be set up via TCCNTLREG. The documentation says:
"Additionaly, this redirection should be enabled only if there is a
non-zero allocation for the CS command buffer section."
We don't allocate any cache to the CS command buffer section, so
enabling this redirection effectively disabled the state cache.
The Windows driver only sets up that section when using POSH, which
we do not currently use. So, leave it unallocated and disable the
redirection to get a functional state cache again.
Improves performance in Civilization VI by 18%, Manhattan 3.0 by 6%,
and Car Chase by 2%.
Jason pointed out that the caches likely refer to offsets from dynamic
and surface state base addresses, so when we change those, we need to
invalidate the caches.
Comment borrowed from src/intel/vulkan/genX_cmd_buffer.c.
Rafael Antognolli tracked down a performance gap between i965 and iris
in Synmark2's OglCSDof microbenchmark, noting that iris was performing
substantially more memory reads and writes, with substantially fewer
L3 hits. He suggested that something might be wrong with MOCS, or L3
configs, at which point I came up with a theory...
It would appear that the STATE_BASE_ADDRESS command updates the MOCS
settings for various base addresses even if you don't specify the
"Modify Enable" bit for that address. Until now, we had been setting
only the MOCS for bases we intended to change, leaving the others
"blank" which is MOCS table entry 0, which is uncached.
Most data access has a more specific MOCS (e.g. in SURFACE_STATE),
but scratch access uses the Stateless Data Port Access MOCS from
STATE_BASE_ADDRESS. So this meant all scratch access was uncached.
Improves performance in Synmark2's OglCSDof by 2x, bringing iris
on par with the existing i965 driver.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Gen11 stores the fast clear color in an "indirect clear buffer", as
a packed pixel value. Gen9 hardware stores it as a float or integer
value, which is interpreted via the format. We were trying to store
that in a buffer, for similarity with Icelake, and MI_COPY_MEM_MEM
it from there to the actual SURFACE_STATE bytes where it's stored.
This unfortunately doesn't work for blorp_copy(), which does bit-for-bit
copies, and overrides the format to a CCS-compatible UINT format. This
causes the clear color to be interpreted in the overridden format.
Normally, we provide the clear color on the CPU, and blorp_blit.c:2611
converts it to a packed pixel value in the original format, then unpacks
it in the overridden format, so the clear color we use expands to the
bits we originally desired.
However, BLORP doesn't support this pack/unpack with an indirect clear
buffer, as it would need to do the math on the GPU. On Gen11+, it isn't
necessary, as the hardware does the right thing.
This patch changes Gen9 to stop using an indirect clear buffer and
simply do PIPE_CONTROLs with post-sync write immediate operations
to store the new color over the surface states for regular drawing.
BLORP continues streaming out surface states, and handles fast clear
colors on the CPU.
Fixes: 53c484ba8a ("iris: blorp using resolve hooks")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
For renderable surfaces, we allocate SURFACE_STATEs for each bit in
res->aux.possible_usages. Sampler views use res->aux.sampler_usages.
When pinning buffers, we call surf_state_offset_for_aux() to calculate
the offset to the desired surface state. surf_state_offset_for_aux()
took an aux_modes parameter, which should be one of those two fields.
However...it was not using that parameter. It always used the broader
res->aux.possible_usages field directly.
One of the callers, update_clear_value(), was passing incorrect masks
for this parameter. It iterated through the bits in order, using
u_bit_scan(), which destructively modifies the mask. So each time we
called it, the count of bits before our selected mode was 0, which would
cause us to always update the SURFACE_STATE for ISL_AUX_USAGE_NONE,
rather than updating each in turn. This was hidden by the earlier bug
where surf_state_offset_for_aux() ignored the parameter.
Fixes: 7339660e80 ("iris: Add aux.sampler_usages.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
This is genxml, we can compile out this code.
Fixes: 2660667284 ("iris/gen8: Re-emit the SURFACE_STATE if the clear color changed.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
