This patch adds functions for locking/unlocking the mutex, along with
_mesa_HashLookupLocked() and _mesa_HashInsertLocked()
that do lookups and insertions without locking the mutex.
These functions will be used by the ARB_multi_bind entry points to
avoid locking/unlocking the mutex for each binding point.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The texture can only be bound to the index that corresponds to its
target, so there is no need to loop over all possible indices
for every unit and checking if the texture is bound to it.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will be used by glBindTextures() when unbinding textures,
to avoid having to loop over all the targets.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This will be used by glBindTextures() so we don't have to look it up
for each texture.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
We had the EGLimage structure laying around in intel_regions.h, but now
it's the only thing left in the file.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
v2: Fix bad pointer on unreference (caught by Chad)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
I slipped this in in the region->pitch change from pixels to bytes, but I
don't see any reason for it any more -- the libdrm code doesn't appear to
divide pitch by a cpp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
If the stride wasn't width*cpp, we wouldn't track how much of the src is
busy, and allow a subdata into the end to proceed unsynchronized.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Note: region->width/height used to reflect the total_width/height padding
of separate stencil, though mt->total_width didn't. region->width/height
was being used in EGL images, where the padded value would have been the
wrong one, so I converted them to use rb->Width/Height.
v2: Drop debug printf that slipped in (caught by Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Regions aren't refcounted safely for multithreaded applications, and
they're not terribly useful wrappers of a BO, so I'm trying to remove
them.
Even the stride I added here could probably be reduced to use of an
existing field in the __DRIimageRec, but I want this to be as mechanical
of a change as possible.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I want to do this to get the region removed from DRI images. However, it
does mean that we won't share the intel_region between the rb and the
texture for texture_from_pixmap. I think that's fine.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I noticed that we were doing this while changing the DRI3 path to not use
regions, which involved changing the signature of
intel_update_winsys_renderbuffer_miptree() this way.
v2: Replace my comment with Chad's version.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Once a buffer has been named, drm_intel_bo_flink() is just a getter.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
The drm function to get the tiling is just a getter storing the two
pointers, so we don't need to go out of our way to avoid it.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
All the consumers are doing it on a miptree.
v2: fix a silly duplicated dereference (review by Ken)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> (v1)
Reviewed-by: Chad Versace <chad.versace@linux.intel.com> (v1)
All the consumers are doing it on a miptree.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
v1 of the patch got pushed, insted of the v2 that I had reviewed.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
intel_alloc_renderbuffer_storage() will clobber rb->Format which was
already set up by intel_create_renderbuffer(). This causes the driver
to potentially create the depth buffer in the wrong format.
In practice this makes the depth buffer Z24 even if the visual has
depthBits==16.
The incorrect depth buffer format doesn't seem to cause any actual
problems in i965, but it seems like we should fix it anyway. I see
Z16 has been more or less deprecated in the driver except the for
the depthBits==16 case. But if we want to use Z24 even in that
case (not sure it's really legal?) it would look better if the
code made that decision explicitly rather than relying on the
format to get magically overwritten by the renderbuffer code.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Gen2 doesn't support texturing from Z formats, so state as much.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
intel_alloc_renderbuffer_storage() will clobber rb->Format which was
already set up by intel_create_renderbuffer(). This causes the driver
to potentially create the depth buffer in the wrong format.
Long time ago things worked by accident because
_mesa_choose_tex_format() checked for ARB_depth_texture
and thus returned MESA_FORMAT_NONE on gen2 hardware. Somehow
that ended up working when depthBits==16 because the driver
would then pick DEPTH_FRMT_16_FIXED. Not sure how, but things
also seemed to work with depthBits==24.
Things started to go more sideways at:
commit 6ae473221a
Author: Eric Anholt <eric@anholt.net>
Date: Mon Apr 22 16:04:25 2013 -0700
intel: Fold the one last function intel_tex_format.c into the caller.
since that caused intel_miptree_create_layout() to divide by zero
when encoutering MESA_FORMAT_NONE (bw==0). So after this
commit things were broken enough that many applications wouldn't even
run.
Things got a bit better at:
commit c245efe7e8
Author: Eric Anholt <eric@anholt.net>
Date: Thu Mar 21 09:50:45 2013 -0700
mesa: Remove extension checking from ChooseTexFormat.
since now _mesa_choose_tex_format() would return MESA_FORMAT_X8_Z24
for GL_DEPTH_COMPONENT due to i915 erroneosly claiming that
MESA_FORMAT_X8_S24 (and others) are supported texture formats even
on gen2 hardware. So now the the div-by-zero was gone, but now the
driver would pick DEPTH_FRMT_24_FIXED_8_OTHER even when
depthBits==16 which caused rendering problems.
If we prevent rb->Format from getting clobbered for the depth buffer
things work much better. This makes the spinning title text visible
again in chromium-bsu at 16bpp, for example.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
V2: Follow the new naming convention for unpack functions.
Use double precision for converting Z24 to a float.
V3: Unpack stencil value to most significant byte.
Use 'struct z32f_x24s8' type.
V4: Unpack stencil value to least significant byte.
Add a comment to clarify stencil packing.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch makes non-functional changes in the code. New helper
function added here will make it easier to support more data
types in the following patches.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch contains non-functional changes. Assertion checks made
earlier in the functions make the if checks redundant. So, remove
the if checks and unindent the code in if block.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
_mesa_texstore_z24_s8() and _mesa_texstore_z32f_x24s8() are capable of
handling GL_DEPTH_STENCIL format. So, allow it in both the functions.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Depth-stencil teture targets are allowed to use source data of type
GL_UNSIGNED_INT_24_8_EXT and GL_FLOAT_32_UNSIGNED_INT_24_8_REV.
Fixes few crashes in Khronos OpenGL CTS packed_pixels tests.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
From OpenGL 4.0 spec, page 306:
"Calling GetTexImage with a format of STENCIL_INDEX
causes the error INVALID_ENUM."
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
V2: Alphabetize the new entry
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Link error conditions added in previous patch are equally applicable
to GL_ARB_fragment_coord_conventions implementation. Extension's spec
says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that program
that have a static use of gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must have
the same set of qualifiers."
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL 1.50 spec says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that
program that have a static use gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must
have the same set of qualifiers."
This patch causes the shader link to fail if we have multiple fragment
shaders with conflicting layout qualifiers for gl_FragCoord.
V2: Restructure the code and add conditions to correctly handle the
following case:
fragment shader 1:
layout(origin_upper_left) in vec4 gl_FragCoord;
void main()
{
foo();
gl_FragColor = gl_FragData;
}
fragment shader 2:
layout(pixel_center_integer) in vec4 gl_FragCoord;
void foo()
{
}
V3:
Allow linking in the following case:
fragment shader 1:
void main()
{
foo();
gl_FragColor = gl_FragCoord;
}
fragment shader 2:
in vec4 gl_FragCoord;
void foo()
{
...
}
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Section 4.3.8.1, page 39 of GLSL 1.50 spec says:
"Within any shader, the first redeclarations of gl_FragCoord
must appear before any use of gl_FragCoord."
GLSL compiler should generate an error in following case:
vec4 p = gl_FragCoord;
layout(origin_upper_left) in vec4 gl_FragCoord;
void main()
{
}
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
GLSL 1.50 spec says:
"If gl_FragCoord is redeclared in any fragment shader in a program,
it must be redeclared in all the fragment shaders in that
program that have a static use gl_FragCoord. All redeclarations of
gl_FragCoord in all fragment shaders in a single program must
have the same set of qualifiers."
This patch makes the glsl compiler to generate an error if we have a
fragment shader defined with conflicting layout qualifier declarations
for gl_FragCoord. For example:
layout(origin_upper_left, pixel_center_integer) in vec4 gl_FragCoord;
layout(pixel_center_integer) in vec4 gl_FragCoord;
void main()
{
}
V2: Some code refactoring for better readability.
Add compiler error conditions for redeclarations like:
layout(origin_upper_left) in vec4 gl_FragCoord;
layout(origin_upper_left, pixel_center_integer) in vec4 gl_FragCoord;
and
in vec4 gl_FragCoord;
layout(origin_upper_left, pixel_center_integer) in vec4 gl_FragCoord;
V3: Simplify function is_conflicting_fragcoord_redeclaration()
V4: Check for null pointer before doing strcmp(var->name, "gl_FragCoord").
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
In OpenGL 3.1 attribute 0 becomes non-magic, just like in
OpenGL ES 2.0. Earlier versions of OpenGL used attribute 0
exclusively for vertex position.
V2: Add a utility function _mesa_attr_zero_aliases_vertex() in
varray.h
Fixes 4 Khronos OpenGL CTS failures:
glGetVertexAttrib
depth24_basic
depth24_precision
rgb8_rgba8_rgb
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This patch makes changes to the behavior of glGetAttribLocation(),
glGetFragDataLocation() and glGetFragDataIndex() functions.
Code changes handle a case described in following example:
shader program:
layout(location = 1)in vec4[4] a;
void main()
{
}
Currently, glGetAttribLocation("a") returns 1.
glGetAttribLocation("a[i]"), where i = {0, 1, 2, 3}, returns -1.
But the expected locations for array elements are: 1, 2, 3 and 4
respectively.
This clarification came up with the addition of
ARB_program_interface_query to OpenGL 4.3.
From Page 326 (page 347 of the PDF) of OpenGL 4.3 spec:
"Otherwise, the command is equivalent to
GetProgramResourceLocation(program, PROGRAM_INPUT, name);"
And, From Page 101 (page 122 of the PDF) of OpenGL 4.3 spec:
"A string provided to GetProgramResourceLocation or
GetProgramResourceLocationIndex is considered to match an active
variable if
• the string exactly matches the name of the active variable;
• if the string identifies the base name of an active array, where
the string would exactly match the name of the variable if the
suffix "[0]" were appended to the string; or
• if the string identifies an active element of the array, where
the string ends with the concatenation of the "[" character, an
integer (with no "+" sign, extra leading zeroes, or whitespace)
identifying an array element, and the "]" character, the integer
is less than the number of active elements of the array variable,
and where the string would exactly match the enumerated name of
the array if the decimal integer were replaced with zero."
V2: Simplify get_matching_index() function.
Add relevant text from OpenGL spec in commit message.
Fixes failures in Khronos OpenGL CTS tests:
explicit_attrib_location_room
draw_instanced_max_vertex_attribs
Proprietary linux drivers of NVIDIA (331.49) matches the behavior
expected by OpenGL 4.3 spec.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Currently overlapping locations of input variables are not allowed for all
the shader types in OpenGL and OpenGL ES.
From OpenGL ES 3.0 spec, page 56:
"Binding more than one attribute name to the same location is referred
to as aliasing, and is not permitted in OpenGL ES Shading Language
3.00 vertex shaders. LinkProgram will fail when this condition exists.
However, aliasing is possible in OpenGL ES Shading Language 1.00 vertex
shaders."
Taking in to account what different versions of OpenGL and OpenGL ES specs
say about aliasing:
- It is allowed only on vertex shader input attributes in OpenGL (2.0 and
above) and OpenGL ES 2.0.
- It is explictly disallowed in OpenGL ES 3.0.
Fixes Khronos CTS failing test:
explicit_attrib_location_vertex_input_aliased.test
See more details about this at below mentioned khronos bug.
V2: Fix the case where location exceeds the maximum allowed attribute
location.
V3: Simplify the condition added in V2.
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "9.2 10.0 10.1" <mesa-stable@lists.freedesktop.org>
Bugzilla: Khronos #9609
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
don't leak the MCSubtargetInfo (not really big, was already fixed with
llvm master) and TargetMachine (big). While this is only used for debugging
the leak is large enough to get you into trouble in some cases.
Tested with llvm 3.1 and master.
Before (llvm 3.1), GALLIVM_DEBUG=asm glxgears:
==14152== LEAK SUMMARY:
==14152== definitely lost: 105,228 bytes in 20 blocks
==14152== indirectly lost: 347,252 bytes in 261 blocks
==14152== possibly lost: 866,625 bytes in 1,453 blocks
==14152== still reachable: 7,344,677 bytes in 6,494 blocks
==14152== suppressed: 0 bytes in 0 blocks
After:
==13799== LEAK SUMMARY:
==13799== definitely lost: 3,108 bytes in 6 blocks
==13799== indirectly lost: 0 bytes in 0 blocks
==13799== possibly lost: 804,143 bytes in 1,429 blocks
==13799== still reachable: 7,314,267 bytes in 6,473 blocks
==13799== suppressed: 0 bytes in 0 blocks
Reviewed-by: Brian Paul <brianp@vmware.com>
